Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ009075A0000 ABB PFVS2122 Vertical Front Busbar Segregation Kit with Internal Upper Section H200 W1250 System pro E Power
ABB PFVS2122 (1STQ009075A0000) is a vertical front busbar segregation accessory with an internal upper arrangement for 200 mm high segregation configurations in compatible 1250 mm wide ABB System pro E Power low-voltage electrical switchboards.
£68.83
Why Choose the ABB PFVS2122 System pro E Power Vertical Front Busbar Segregation Kit?
The ABB PFVS2122 (1STQ009075A0000) is a purpose-designed vertical front busbar segregation accessory for ABB System pro E Power low-voltage electrical distribution switchboards. Designed for a 200 mm high front busbar segregation arrangement within compatible 1250 mm wide switchboard configurations, this component supports physical separation of designated busbar areas within modular electrical distribution assemblies.
As part of the ABB System pro E Power series, the PFVS2122 is specified for vertical front busbar segregation with an additional internal upper arrangement. It helps electrical panel builders create structured internal compartment layouts and establish physical barriers around designated busbar sections. Its dedicated configuration makes it suitable for professional switchboard construction in industrial and commercial power distribution installations.
The ABB PFVS2122 is intended for integration with compatible System pro E Power enclosure structures, busbar supports and internal segregation accessories. Its 200 mm nominal segregation height and 1250 mm nominal switchboard width provide clear selection parameters for the corresponding modular switchboard arrangement. The accessory supports organised internal construction while maintaining compatibility with the specified ABB enclosure platform.
Key Advantages
- Purpose-designed vertical front busbar segregation accessory for ABB System pro E Power switchboards.
- 200 mm nominal segregation height for the specified front busbar arrangement.
- Designed for compatible 1250 mm wide switchboard configurations.
- Includes provision for the specified internal upper segregation arrangement.
- Supports physical separation of designated busbar areas within electrical distribution assemblies.
- Helps establish structured internal compartment boundaries in modular switchboards.
- Designed for integration with compatible ABB System pro E Power enclosure and busbar components.
- Supports organised electrical panel construction and maintenance planning.
- Provides a dedicated segregation solution for the specified front busbar configuration.
- Suitable for industrial and commercial low-voltage power distribution applications.
Key Features
- ABB System pro E Power modular switchboard accessory.
- PFVS2122 vertical front busbar segregation component.
- ABB manufacturer order code 1STQ009075A0000.
- Designed for vertical front busbar segregation.
- Specified with an internal upper segregation arrangement.
- 200 mm nominal segregation height.
- 1250 mm nominal switchboard width.
- Vertical segregation orientation for compatible front busbar compartments.
- Mechanical barrier accessory for low-voltage electrical switchboards.
- Designed for integration into compatible System pro E Power modular enclosure structures.
- Supports physical separation between designated internal switchboard areas.
- Suitable for use alongside compatible ABB busbar supports and mounting accessories.
- Intended for professional electrical switchboard assembly.
- Dedicated configuration for the specified front busbar and internal upper segregation arrangement.
Reliable Vertical Front Busbar Segregation for Electrical Distribution Systems
The ABB PFVS2122 vertical busbar segregation accessory is designed to support internal separation within low-voltage electrical distribution switchboards. Busbar segregation components provide physical barriers around designated conductor areas, helping electrical panel builders create organised internal layouts and maintain defined compartment boundaries within a completed switchboard assembly.
The ABB System pro E Power platform provides a modular approach to low-voltage electrical switchboard construction. Within this system, the PFVS2122 is specified for a vertical front busbar segregation arrangement with an internal upper section. Its 200 mm nominal height and compatibility with 1250 mm wide switchboard configurations make it suitable for the corresponding enclosure arrangement.
Busbars distribute electrical power between incoming and outgoing circuits within a switchboard. Appropriate internal barriers help separate designated busbar areas from other equipment compartments, supporting structured installation and maintenance procedures. The PFVS2122 contributes to this separation as part of a complete ABB System pro E Power assembly.
The internal upper segregation arrangement identified in the manufacturer's product designation provides a specific configuration for the front busbar area. Selection of the PFVS2122 should be coordinated with the switchboard layout, busbar positioning, enclosure dimensions and additional segregation components required by the complete electrical distribution design.
The PFVS2122 is a mechanical segregation accessory rather than a complete switchboard, busbar system or electrical protective device. It does not independently establish a particular segregation form, ingress protection rating, current rating or short-circuit withstand capability. These characteristics depend on the complete switchboard assembly and its verified configuration. Installation should follow the applicable ABB assembly instructions and relevant requirements of the IEC/EN 61439 series.
Typical Applications
- ABB System pro E Power low-voltage electrical switchboards.
- Industrial main distribution board assemblies.
- Vertical front busbar compartment segregation.
- Switchboard configurations with internal upper segregation arrangements.
- Electrical distribution enclosures with a nominal width of 1250 mm.
- Front busbar segregation arrangements with a nominal height of 200 mm.
- Commercial building electrical distribution systems.
- Industrial manufacturing and processing facilities.
- Modular switchboard construction and electrical panel assembly.
- Power distribution infrastructure for industrial automation systems.
- OEM electrical switchboard manufacturing and panel building.
- Compatible switchboard refurbishment and internal segregation accessory replacement.
Technical Specifications
| Product group | System pro E Power |
|---|---|
| Series | PFVS |
| Manufacturer order code | 1STQ009075A0000 |
| Product designation | SEG.BUS.VER.FRONT.H200+INT.UP.W1250 |
| Product type | Vertical front busbar segregation accessory |
| Product category | Electrical switchboard enclosure accessories |
| Accessory classification | Internal busbar segregation component |
| Segregation orientation | Vertical |
| Segregation location | Front busbar compartment |
| Additional arrangement | Internal upper segregation |
| Nominal segregation height | 200 mm |
| Nominal switchboard width | 1250 mm |
| Compatible enclosure system | ABB System pro E Power |
| Installation type | Internal switchboard mounting |
| Primary function | Physical separation of front busbar compartment areas |
| Application | Low-voltage electrical distribution switchboards |
| Suitable equipment | Compatible main distribution board assemblies |
| Product configuration | Vertical front busbar segregation with internal upper arrangement |
Frequently Asked Questions
What is the ABB PFVS2122 used for?
The ABB PFVS2122 is a vertical front busbar segregation accessory designed to provide physical separation within compatible ABB System pro E Power low-voltage electrical switchboards. It is specified for front busbar arrangements incorporating an internal upper segregation section.
What dimensions are specified for the ABB PFVS2122?
The PFVS2122 is specified for a 200 mm nominal segregation height and a compatible switchboard width of 1250 mm. These are the manufacturer's configuration dimensions and should not be interpreted as confirmed overall physical dimensions of the individual accessory.
What does the PFVS2122 product designation mean?
The designation SEG.BUS.VER.FRONT.H200+INT.UP.W1250 identifies a busbar segregation accessory for a vertical front arrangement with an internal upper section, specified for a nominal segregation height of 200 mm and switchboard width of 1250 mm.
Which ABB switchboard system is compatible with the PFVS2122?
The PFVS2122 belongs to the ABB System pro E Power modular switchboard range. It is intended for compatible low-voltage electrical distribution assemblies using the specified vertical front busbar segregation arrangement.
What is the purpose of vertical front busbar segregation?
Vertical front busbar segregation provides a physical barrier around designated busbar areas at the front of a compatible switchboard arrangement. It contributes to organised compartment layouts and the internal separation requirements of the complete electrical distribution assembly.
Does the ABB PFVS2122 provide a specific segregation form?
The PFVS2122 is an internal busbar segregation component, but its product designation does not independently specify a complete segregation form. The final classification depends on the overall switchboard design and the correct installation of all required barriers, compartments and associated accessories.
What is the difference between vertical front and horizontal rear busbar segregation?
Vertical front segregation, as specified for the PFVS2122, is intended for a designated front busbar arrangement. Horizontal rear segregation is used for designated rear busbar compartment arrangements. The correct accessory depends on the busbar position, enclosure configuration and segregation requirements of the complete switchboard.
Is the ABB PFVS2122 a complete busbar system or electrical enclosure?
No. The PFVS2122 is a mechanical internal segregation accessory, not a complete busbar system, enclosure or protective switching device. It must be installed alongside compatible ABB System pro E Power structures and other required electrical distribution components.
What is the ABB order code for the PFVS2122?
The official ABB manufacturer order code is 1STQ009075A0000, corresponding to the PFVS2122 vertical front busbar segregation accessory with internal upper arrangement, H=200 mm and W=1250 mm.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power components support the construction of modular low-voltage electrical distribution switchboards for industrial and commercial applications. The ABB PFVS2122 vertical front busbar segregation accessory provides a purpose-designed solution for electrical engineers, switchboard manufacturers and panel builders requiring structured internal busbar separation in compatible 200 mm high and 1250 mm wide segregation arrangements.
