Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTHS1292 (1STQ009074A0000) is a horizontal rear busbar segregation accessory with an internal upper arrangement for compatible 1250 mm wide and 900 mm deep ABB System pro E Power low-voltage electrical switchboards.
£119.52
The ABB PTHS1292 (1STQ009074A0000) is a purpose-designed horizontal rear busbar segregation accessory for ABB System pro E Power low-voltage electrical distribution switchboards. Designed for compatible switchboard configurations with a nominal width of 1250 mm and depth of 900 mm, this component supports the physical separation of busbar areas from other internal sections of an electrical distribution assembly.
As part of the ABB System pro E Power series, the PTHS1292 is intended for rear horizontal busbar segregation arrangements incorporating an internal upper section. Its dedicated configuration helps electrical panel builders organise busbar compartments and establish defined internal barriers within modular switchboards used for industrial and commercial power distribution.
The ABB PTHS1292 provides a practical mechanical segregation solution for compatible System pro E Power installations. Its 1250 mm nominal width makes it suitable for the corresponding wide switchboard configuration, while its 900 mm nominal depth compatibility supports integration into deeper electrical distribution enclosures. The accessory is designed to work alongside the appropriate ABB enclosure structures, busbar supports and internal segregation components.
The ABB PTHS1292 horizontal busbar segregation accessory is designed to support internal separation within low-voltage electrical distribution switchboards. Busbar segregation components provide physical barriers around designated busbar areas, helping electrical panel builders create structured internal layouts and maintain defined compartment boundaries within a completed electrical assembly.
The ABB System pro E Power platform provides a modular approach to the construction of low-voltage switchboards. Within this system, the PTHS1292 is specified for a rear horizontal busbar segregation arrangement with an internal upper section. Its compatibility with 1250 mm wide and 900 mm deep switchboard configurations makes it suitable for the corresponding enclosure arrangement.
Busbars are used to distribute electrical power between incoming and outgoing circuits within a switchboard. Appropriate internal barriers help separate these conductors from designated functional areas, supporting organised installation and maintenance procedures. The PTHS1292 contributes to this compartmentalisation as part of a complete ABB System pro E Power assembly.
The internal upper segregation arrangement identified in the manufacturer's product designation provides a specific configuration for the rear busbar compartment. Selection of this accessory should be coordinated with the switchboard layout, busbar positioning, enclosure dimensions and other segregation components required by the complete design.
The PTHS1292 is a mechanical segregation accessory rather than a complete switchboard, busbar system or electrical protective device. It does not independently establish a particular segregation form, ingress protection rating, current rating or short-circuit withstand capability. These characteristics depend on the complete switchboard assembly and its verified configuration. Installation should follow the applicable ABB assembly instructions and relevant requirements of the IEC/EN 61439 series.
| Product group | System pro E Power |
|---|---|
| Series | PTHS |
| Manufacturer order code | 1STQ009074A0000 |
| Product designation | SEG.BUS.HOR.REAR +INT.UP.W1250 FOR D900 |
| Product type | Horizontal rear busbar segregation accessory |
| Product category | Electrical switchboard enclosure accessories |
| Accessory classification | Internal busbar segregation component |
| Segregation orientation | Horizontal |
| Segregation location | Rear busbar compartment |
| Additional arrangement | Internal upper segregation |
| Nominal switchboard width | 1250 mm |
| Nominal switchboard depth | 900 mm |
| Compatible enclosure system | ABB System pro E Power |
| Installation type | Internal switchboard mounting |
| Primary function | Physical separation of rear busbar compartment areas |
| Application | Low-voltage electrical distribution switchboards |
| Suitable equipment | Compatible main distribution board assemblies |
| Product configuration | Rear horizontal busbar segregation with internal upper arrangement |
The ABB PTHS1292 is a horizontal rear busbar segregation accessory designed to provide physical separation within compatible ABB System pro E Power low-voltage electrical switchboards. It is specified for rear busbar compartment arrangements incorporating an internal upper segregation section.
The PTHS1292 is designed for compatible switchboard configurations with a nominal width of 1250 mm and depth of 900 mm. These values describe the intended enclosure configuration rather than the confirmed overall physical dimensions of the individual accessory.
The designation SEG.BUS.HOR.REAR +INT.UP.W1250 FOR D900 identifies a busbar segregation accessory for a horizontal rear arrangement with an internal upper section, intended for a nominal switchboard width of 1250 mm and depth of 900 mm.
The PTHS1292 belongs to the ABB System pro E Power modular switchboard range. It is intended for compatible low-voltage distribution assemblies using the specified rear busbar segregation configuration.
Horizontal busbar segregation provides a physical barrier between designated busbar areas and other internal switchboard sections. It supports organised compartment layouts and contributes to the internal separation requirements of the complete electrical distribution assembly.
The PTHS1292 is an internal busbar segregation component, but its product designation does not independently specify a complete segregation form. The final classification depends on the overall switchboard design and the correct installation of all required barriers, compartments and associated accessories.
No. The PTHS1292 is a mechanical internal segregation accessory, not a complete busbar system, enclosure or protective switching device. It must be installed alongside compatible ABB System pro E Power structures and other required electrical distribution components.
The official ABB manufacturer order code is 1STQ009074A0000, corresponding to the PTHS1292 horizontal rear busbar segregation accessory with internal upper arrangement for 1250 mm wide and 900 mm deep System pro E Power switchboard configurations.
ABB System pro E Power components support the construction of modular low-voltage electrical distribution switchboards for industrial and commercial applications. The ABB PTHS1292 horizontal rear busbar segregation accessory provides a purpose-designed solution for electrical engineers, switchboard manufacturers and panel builders requiring structured internal busbar compartment separation in compatible 1250 mm wide and 900 mm deep distribution board configurations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.