Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTVS1020 (1STQ009071A0000) is a vertical lateral segregation component for compatible System pro E Power low-voltage switchboard configurations, specified with a nominal height of 1000 mm, depth of 200 mm and NO IN.UP. and PRE-C. manufacturer designations.
£62.50
The ABB PTVS1020 (1STQ009071A0000) is a dedicated vertical lateral segregation component from the ABB System pro E Power range, intended for integration into compatible low-voltage electrical distribution switchboards. Its manufacturer designation, SEGR.VER.LAT.NO IN.UP. H1000 D200+PRE-C., identifies a vertical lateral segregation arrangement with a nominal height of 1000 mm, depth of 200 mm and an additional PRE-C. configuration reference.
Designed for use within the ABB System pro E Power modular switchboard platform, the PTVS1020 supports the organisation of internal switchboard compartments through appropriately selected segregation accessories. It is particularly relevant to professional electrical panel builders, switchboard manufacturers and installation specialists who require components matched to specific internal separation arrangements.
The ABB PTVS1020 combines a 1000 mm nominal height with a 200 mm nominal depth, making it a designated option for compatible switchboard configurations requiring these dimensions. The manufacturer's NO IN.UP. and PRE-C. references provide additional identification details that should be checked against ABB technical documentation when planning installation or selecting a replacement component.
Internal segregation is an important consideration in the design of low-voltage switchgear and controlgear assemblies. Depending on the required switchboard configuration, separation components help establish boundaries between designated functional areas, electrical equipment spaces and connection compartments. Correct component selection supports the intended internal arrangement and must be coordinated with the complete switchboard design.
The ABB PTVS1020 is specifically identified as a vertical lateral segregation component. Its vertical orientation and lateral arrangement distinguish it from horizontal segregation accessories and other internal panels within the ABB System pro E Power range. Selecting the correct component type helps panel builders maintain consistency with the intended switchboard compartment layout.
The PTVS1020 is specified for a nominal 1000 mm height and 200 mm depth. These values identify the intended configuration and are important when assessing compatibility with the planned switchboard structure. They should not automatically be interpreted as independently verified overall physical measurements of the individual segregation component.
The manufacturer's abbreviated description includes the references NO IN.UP. and PRE-C.. These designations may distinguish the PTVS1020 from other vertical lateral segregation components in the same product family. Their precise technical meaning and any associated installation requirements should be established from the relevant ABB catalogue, assembly drawings and installation instructions rather than inferred from the abbreviated description.
The ABB System pro E Power series is a modular platform for constructing low-voltage electrical distribution switchboards used in industrial facilities, commercial buildings and electrical infrastructure. Its range of structural components, mounting accessories, internal panels and segregation elements allows professional switchboard manufacturers to develop configurations suited to different equipment arrangements and project requirements.
Correctly selected segregation components can support the intended internal layout, but an individual accessory does not independently determine the achieved form of separation, ingress protection rating or electrical performance of a completed switchboard. These characteristics depend on the overall assembly, including the enclosure, adjoining barriers, structural supports and installed electrical equipment.
Completed low-voltage switchgear and controlgear assemblies should be designed and verified against the applicable requirements of IEC 61439-1 and IEC 61439-2. The PTVS1020 should be incorporated only into a compatible ABB configuration using the appropriate mounting arrangements and installation procedures specified for the complete switchboard.
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ009071A0000 |
| Manufacturer description | SEGR.VER.LAT.NO IN.UP. H1000 D200+PRE-C. |
| Product type | Vertical lateral segregation component |
| Product category | Low-voltage switchboard internal segregation accessories |
| Segregation orientation | Vertical |
| Segregation arrangement | Lateral |
| Configuration notation | NO IN.UP. |
| Nominal height | 1000 mm |
| Nominal depth | 200 mm |
| Additional configuration reference | PRE-C. |
| Compatible system | ABB System pro E Power |
| Installation location | Within a compatible low-voltage switchboard assembly |
| Application | Internal vertical lateral segregation |
| Assembly type | Modular low-voltage switchgear and controlgear assembly |
| Suitable for | Compatible industrial and commercial electrical distribution switchboards |
| Mounting requirements | As specified in the applicable ABB assembly instructions |
The ABB PTVS1020 is a vertical lateral segregation component designed for compatible ABB System pro E Power low-voltage switchboards. It is specified for an internal segregation arrangement with a nominal height of 1000 mm and depth of 200 mm, together with the manufacturer's NO IN.UP. and PRE-C. configuration references.
The PTVS1020 is specified for a nominal height of 1000 mm and depth of 200 mm. These figures identify the intended configuration and should not automatically be treated as independently verified external dimensions of the individual component.
Both products are vertical lateral segregation components within the ABB System pro E Power range and share the NO IN.UP. and PRE-C. manufacturer references. The PTVS1020 is specified for a nominal height of 1000 mm, while the PTVS8020 is specified for 800 mm. Both have a nominal depth designation of 200 mm. The correct model should be selected according to the required assembly configuration.
NO IN.UP. and PRE-C. are configuration references included in ABB's abbreviated manufacturer description. Their precise technical meanings and any associated installation requirements should be confirmed using the relevant ABB System pro E Power catalogue and assembly documentation.
No. The PTVS1020 is an internal vertical lateral segregation component, but the achieved form of separation depends on the complete switchboard design, including adjoining barriers, structural components, installed equipment and mounting arrangements. The finished assembly must be configured and verified according to the applicable ABB instructions and standards.
ABB System pro E Power accessories support modular low-voltage switchboard construction for industrial and commercial electrical distribution. The PTVS1020 provides a dedicated vertical lateral segregation component for configurations identified by a nominal 1000 mm height, 200 mm depth and the manufacturer's NO IN.UP. and PRE-C. references, helping professional panel builders select components suited to the intended internal assembly arrangement.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.