Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTVS8020 (1STQ009070A0000) is a vertical lateral segregation component for compatible System pro E Power low-voltage switchboard configurations, specified with a nominal height of 800 mm, depth of 200 mm and NO IN.UP. and PRE-C. manufacturer designations.
£60.61
The ABB PTVS8020 (1STQ009070A0000) is a dedicated vertical lateral segregation component from the ABB System pro E Power range, intended for use in compatible low-voltage electrical distribution switchboard assemblies. Its manufacturer designation, SEGR.VER.LAT.NO IN.UP. H800 D200+PRE-C., identifies a vertical lateral segregation arrangement with a nominal height of 800 mm, depth of 200 mm and an additional PRE-C. configuration reference.
Designed for integration into the ABB System pro E Power modular switchboard platform, the PTVS8020 supports the organisation of internal switchboard spaces through appropriately selected segregation components. It is relevant to professional electrical panel builders, switchboard manufacturers and installation specialists who require components matched to the intended internal compartment arrangement.
The ABB PTVS8020 is identified by its specific vertical lateral segregation configuration, including the manufacturer's NO IN.UP. designation. This notation should be retained when checking compatibility against ABB assembly documentation, as its precise configuration meaning and the requirements associated with PRE-C. should be confirmed before installation. The component provides a defined selection option for compatible System pro E Power assemblies rather than a universal segregation accessory.
Internal segregation is an important consideration when designing low-voltage electrical distribution switchboards. Depending on the required arrangement, separation components can help establish boundaries between designated functional areas, equipment spaces and connection compartments. The selection and positioning of these components must be coordinated with the complete switchboard design.
The ABB PTVS8020 is specified as a vertical lateral segregation component. Its orientation and lateral designation distinguish it from horizontal segregation accessories and other internal panels used within the System pro E Power platform. This distinction is important when selecting components for a particular compartment layout.
The component is associated with a nominal 800 mm height and 200 mm depth. These dimensions identify the intended configuration and should be used when assessing compatibility with the planned switchboard arrangement. They should not automatically be interpreted as independently verified overall physical measurements of the individual component.
The manufacturer's description also includes NO IN.UP. and PRE-C.. These are configuration identifiers that may distinguish the PTVS8020 from other vertical segregation products within the range. Their precise installation implications should be established from the relevant ABB catalogue, technical drawings and assembly instructions rather than inferred from the abbreviated description alone.
The ABB System pro E Power series provides a modular platform for constructing low-voltage switchgear and controlgear assemblies. It incorporates structural elements, mounting accessories, internal panels and segregation components that allow professional switchboard builders to develop configurations suited to the electrical equipment and installation requirements of a project.
Correctly selected segregation accessories can support the intended internal arrangement, but an individual component does not independently determine the achieved form of separation, ingress protection rating or electrical performance of a switchboard. Those characteristics depend on the complete assembly, including the enclosure, adjoining barriers, installed equipment and the associated mounting arrangements.
Completed low-voltage switchgear and controlgear assemblies should be designed and verified against the applicable requirements of IEC 61439-1 and IEC 61439-2. The PTVS8020 should be installed only in a compatible ABB configuration, using the appropriate fixing components and installation procedures specified for the complete assembly.
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ009070A0000 |
| Manufacturer description | SEGR.VER.LAT.NO IN.UP. H800 D200+PRE-C. |
| Product type | Vertical lateral segregation component |
| Product category | Low-voltage switchboard internal segregation accessories |
| Segregation orientation | Vertical |
| Segregation arrangement | Lateral |
| Configuration notation | NO IN.UP. |
| Nominal height | 800 mm |
| Nominal depth | 200 mm |
| Additional configuration reference | PRE-C. |
| Compatible system | ABB System pro E Power |
| Installation location | Within a compatible low-voltage switchboard assembly |
| Application | Internal vertical lateral segregation |
| Assembly type | Modular low-voltage switchgear and controlgear assembly |
| Suitable for | Compatible industrial and commercial electrical distribution switchboards |
| Mounting requirements | As specified in the applicable ABB assembly instructions |
The ABB PTVS8020 is a vertical lateral segregation component designed for compatible ABB System pro E Power low-voltage switchboards. It is specified for an internal segregation arrangement with a nominal height of 800 mm and depth of 200 mm, together with the manufacturer's NO IN.UP. and PRE-C. configuration references.
The PTVS8020 is specified for a nominal height of 800 mm and depth of 200 mm. These figures identify the intended configuration and should not automatically be treated as independently verified external dimensions of the individual component.
NO IN.UP. is part of ABB's abbreviated manufacturer description for the PTVS8020. Its precise technical meaning and installation implications should be confirmed against the relevant ABB System pro E Power catalogue and assembly documentation before selecting the component.
PRE-C. is an additional configuration reference included in the manufacturer's product description. It should be retained when identifying the correct component, but its exact functional meaning and any associated installation requirements must be verified using ABB's technical documentation.
No. The PTVS8020 is an internal vertical lateral segregation component, but the achieved form of separation depends on the complete switchboard design, including adjoining barriers, structural components, installed equipment and mounting arrangements. The finished assembly must be configured and verified according to the applicable ABB instructions and standards.
ABB System pro E Power accessories support modular low-voltage switchboard construction for industrial and commercial electrical distribution. The PTVS8020 provides a dedicated vertical lateral segregation component for configurations identified by a nominal 800 mm height, 200 mm depth and the manufacturer's NO IN.UP. and PRE-C. references, helping professional panel builders select components suited to the intended internal assembly arrangement.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.