Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PSHW1296 (1STQ009054A0000) is a Form 3b horizontal segregation component for compatible ABB System Pro E Power low-voltage switchboards, designated for ABB E6.2 circuit-breaker configurations with a nominal enclosure width of 1250 mm and depth of 900 mm.
£483.95
The ABB PSHW1296, manufacturer order code 1STQ009054A0000, is a dedicated horizontal segregation accessory for the ABB System Pro E Power low-voltage switchboard range. Identified by the manufacturer designation SEGR.HOR.F3B E6.2 W=1250MM D=900MM, this component is intended for compatible switchboard arrangements requiring Form 3b horizontal segregation associated with ABB E6.2 circuit-breaker configurations.
Horizontal segregation components support the construction of internally separated electrical distribution assemblies by helping establish defined boundaries between functional areas. The PSHW1296 contributes to the specified segregation arrangement within compatible System Pro E Power enclosures, allowing professional panel builders to create organised circuit-breaker compartments and consistent modular switchboard layouts.
Designed for a nominal switchboard width of 1250 mm and depth of 900 mm, the ABB PSHW1296 provides a manufacturer-designated solution for the corresponding enclosure geometry. Its F3B designation identifies the intended Form 3b separation arrangement, while E6.2 identifies the associated ABB circuit-breaker frame family.
Internal segregation is an important consideration in the design of low-voltage switchgear and controlgear assemblies. Under IEC 61439-2, Form 3b arrangements provide separation of busbars from functional units, separation of functional units from one another, and separation of terminals for external conductors from the busbars. In a Form 3b arrangement, terminals for external conductors are also separated from their associated functional units.
The ABB PSHW1296 horizontal segregation component is intended to contribute to the manufacturer-specified F3B arrangement in a compatible System Pro E Power assembly. Its horizontal orientation supports the formation of defined internal compartment boundaries, while the E6.2 designation identifies the associated ABB circuit-breaker frame configuration.
The specified 1250 mm width and 900 mm depth are important selection parameters when coordinating segregation accessories with the switchboard enclosure. The 1250 mm nominal width distinguishes the PSHW1296 from versions intended for narrower enclosure arrangements. Correct selection must account for the complete enclosure structure, circuit-breaker mounting arrangement and other segregation components required by the assembly design.
The PSHW1296 is an individual component within a wider modular switchboard system. Installing this accessory alone does not establish or certify Form 3b compliance. The achieved form of separation, electrical ratings, degree of protection and conformity with applicable standards depend on the design, construction and verification of the complete switchboard.
| Product series | System Pro E Power |
|---|---|
| ABB order code | 1STQ009054A0000 |
| Product type | Horizontal segregation component |
| Product category | Low-voltage switchboard segregation accessories |
| Manufacturer designation | SEGR.HOR.F3B E6.2 W=1250MM D=900MM |
| Segregation arrangement | F3B / Form 3b |
| Associated circuit-breaker frame | ABB E6.2 |
| Nominal switchboard width | 1250 mm |
| Nominal switchboard depth | 900 mm |
| Segregation orientation | Horizontal |
| Compatible system | ABB System Pro E Power |
| Primary function | Internal horizontal segregation in the specified switchboard configuration |
| Application | Low-voltage electrical distribution switchboards |
The ABB PSHW1296 is a horizontal segregation component for compatible ABB System Pro E Power low-voltage switchboards. It supports the construction of the specified Form 3b internal separation arrangement associated with ABB E6.2 circuit-breaker configurations.
The manufacturer designation specifies a nominal switchboard width of 1250 mm and depth of 900 mm. These dimensions identify the intended enclosure configuration and should not be interpreted as verified external measurements of the individual segregation component.
F3B identifies the intended Form 3b internal segregation arrangement. The completed switchboard must incorporate all required separation components and be designed and verified appropriately to achieve the specified form of separation.
The manufacturer designation identifies the ABB E6.2 circuit-breaker frame family. Suitability for a particular breaker installation depends on the complete System Pro E Power enclosure, mounting arrangement and associated segregation components.
The ABB manufacturer order code is 1STQ009054A0000. It identifies the PSHW1296 horizontal segregation component for the specified F3B, E6.2, 1250 mm wide and 900 mm deep System Pro E Power configuration.
ABB System Pro E Power provides a modular platform for professional low-voltage electrical distribution assemblies. The ABB PSHW1296 horizontal segregation component offers a manufacturer-designated solution for compatible Form 3b arrangements associated with ABB E6.2 circuit breakers in 1250 mm wide and 900 mm deep switchboard configurations, supporting organised internal compartment construction and consistent system integration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.