Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PSHF1296 (1STQ009052A0000) is a horizontal segregation component for F3B arrangements associated with E6.2 equipment in 1250 mm wide and 900 mm deep ABB System pro E Power low-voltage switchboard configurations.
£443.64
The ABB PSHF1296 (1STQ009052A0000) is a dedicated horizontal segregation component designed for compatible ABB System pro E Power low-voltage electrical distribution switchboards. Specified for an F3B internal separation arrangement associated with E6.2 equipment, this component is intended for switchboard configurations with a nominal width of 1250 mm and depth of 900 mm.
As part of the ABB System pro E Power range, the PSHF1296 supports modular switchboard construction where appropriately configured horizontal separation is required around electrical distribution equipment. Its specified application is particularly relevant to professional panel builders working with ABB Emax 2 E6.2 air circuit-breaker configurations, where internal segregation accessories must be selected according to the intended switchboard assembly.
The ABB PSHF1296 combines an F3B horizontal segregation designation with a 1250 mm wide × 900 mm deep switchboard configuration. Selecting this dedicated component for a compatible assembly helps maintain the intended internal separation layout, supports consistent component selection and contributes to organised low-voltage switchboard construction.
Internal segregation is an important aspect of low-voltage switchboard design, particularly where the assembly contains multiple functional units, power distribution connections and switching devices. Properly selected separation components help establish the intended boundaries between designated internal areas. Their effectiveness depends on the complete switchboard configuration, including the enclosure, equipment mounting arrangement and adjoining barriers.
The ABB PSHF1296 is identified as a horizontal segregation component for an F3B arrangement associated with E6.2 equipment. Within the ABB System pro E Power platform, this designation allows panel builders to select a component intended for a particular internal separation layout involving compatible ABB Emax 2 E6.2 circuit-breaker installations.
The ABB Emax 2 range includes air circuit-breakers used in low-voltage power distribution systems. The E6.2 designation identifies a frame within this range. Integrating such equipment into a modular switchboard requires consideration of the surrounding structural elements, electrical connections, segregation components and installation requirements established by ABB.
The PSHF1296 is specified for a nominal 1250 mm width and 900 mm depth. These dimensions are important when selecting accessories for the intended switchboard layout, particularly where the configuration calls for a wider cubicle structure. They identify the relevant assembly dimensions and should not automatically be treated as independently verified external measurements of the individual segregation component.
The F3B designation identifies the specified internal segregation arrangement. Although the PSHF1296 is intended for use in this configuration, the individual component does not independently establish that a completed switchboard achieves Form 3b separation. The overall result depends on the correct combination and installation of adjoining barriers, supporting structures, circuit-breaker equipment and other compatible assembly components.
The ABB System pro E Power series provides a modular platform for constructing low-voltage electrical distribution switchboards for industrial facilities, commercial buildings and electrical infrastructure. Its range of structural accessories, internal panels and segregation components enables professional switchboard manufacturers to develop layouts suited to different equipment configurations and enclosure dimensions.
Completed low-voltage switchgear and controlgear assemblies must be assessed against the applicable requirements of IEC 61439-1 and IEC 61439-2. Correct selection and installation of the PSHF1296 can support the intended internal separation configuration, but the final segregation classification, electrical performance and other assembly characteristics depend on the design and verification of the complete switchboard.
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ009052A0000 |
| Manufacturer description | HORIZ.SEG.F3B E6.2 W=1250MM D=900MM |
| Product type | Horizontal segregation component |
| Product category | Low-voltage switchboard internal segregation accessories |
| Segregation designation | F3B |
| Associated equipment designation | E6.2 |
| Associated circuit-breaker range | ABB Emax 2 E6.2 |
| Nominal switchboard width | 1250 mm |
| Nominal switchboard depth | 900 mm |
| Orientation | Horizontal |
| Installation position | Internal switchboard assembly |
| Compatible system | ABB System pro E Power |
| Application | Horizontal segregation in compatible low-voltage switchboard configurations |
| Assembly type | Modular low-voltage switchgear and controlgear assembly |
| Suitable for | Industrial and commercial electrical distribution switchboards |
| Component function | Internal horizontal separation within the specified F3B arrangement |
The ABB PSHF1296 is a horizontal segregation component for compatible ABB System pro E Power low-voltage switchboards. It is specified for an F3B arrangement associated with E6.2 equipment in a nominal 1250 mm wide and 900 mm deep switchboard configuration.
F3B identifies the specified internal segregation arrangement, while E6.2 refers to the associated ABB Emax 2 air circuit-breaker frame configuration. The correct installation must follow the relevant ABB System pro E Power assembly documentation.
The PSHF1296 is specified for a nominal switchboard width of 1250 mm and depth of 900 mm. These values identify the intended assembly configuration rather than independently verified physical dimensions of the individual segregation component.
Both products are horizontal segregation components for F3B arrangements associated with E6.2 equipment in ABB System pro E Power switchboards. The PSHF1296 is specified for a 1250 mm wide × 900 mm deep configuration, while the PSHF1096 is specified for a 1000 mm wide × 900 mm deep configuration. The correct model should be selected according to the required switchboard width and ABB assembly arrangement.
No. The PSHF1296 is identified for an F3B segregation arrangement, but the achieved form of separation depends on the complete switchboard design, including adjoining barriers, installed equipment and mounting components. The finished assembly must be configured and verified according to the applicable ABB instructions and standards.
ABB System pro E Power accessories support modular low-voltage switchboard construction for industrial and commercial electrical distribution. The PSHF1296 provides a dedicated horizontal segregation component for F3B arrangements associated with E6.2 equipment in 1250 mm wide and 900 mm deep configurations, helping professional panel builders maintain the intended internal separation layout within compatible ABB assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.