Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PSHW8074 (1STQ009049A0000) is a horizontal segregation accessory for the F3B E4.2 configuration in ABB System pro E Power low-voltage switchboards, specified for a nominal width of 800 mm and depth of 700 mm.
£83.66
The ABB PSHW8074 is a dedicated horizontal segregation accessory for the ABB System pro E Power modular low-voltage switchboard range. Designed for the specified F3B E4.2 configuration, this component supports internal compartment separation within compatible electrical distribution assemblies.
The PSHW8074 is specified for a switchboard arrangement with a nominal width of 800 mm and depth of 700 mm. Its horizontal segregation design provides a system-specific solution for panel builders incorporating the designated ABB E4.2 circuit-breaker arrangement into a compatible System pro E Power switchboard.
Identified by ABB order code 1STQ009049A0000, the PSHW8074 supports coordinated selection of internal segregation components for industrial and commercial power distribution projects. It is particularly relevant to professional switchboard manufacturers requiring the correct horizontal separation accessory for an F3B E4.2 installation.
Internal segregation is an important part of low-voltage switchboard construction. Horizontal separation components are used to establish physical boundaries between designated internal areas, helping panel builders create organised compartment layouts around power distribution equipment and associated switchboard structures.
The ABB PSHW8074 is identified for the F3B E4.2 arrangement within the System pro E Power range. Its nominal 800 mm width and 700 mm depth correspond to the specified switchboard configuration, helping engineers select the appropriate accessory for the intended installation.
The ABB Emax 2 E4.2 is an air circuit-breaker frame used in low-voltage power distribution applications. Integrating an E4.2 breaker into a modular switchboard requires appropriately selected mounting, structural and segregation accessories. The PSHW8074 contributes to this coordinated installation by providing the specified horizontal separation component for the designated configuration.
The completed switchboard's segregation form, ingress protection rating and electrical performance depend on the entire assembly design and verification. The PSHW8074 should be installed according to the applicable ABB System pro E Power instructions, together with all complementary components required for the selected E4.2 arrangement. The F3B designation should be checked against the relevant ABB configuration documentation rather than assumed to establish a particular segregation form independently.
| Product range | System pro E Power |
|---|---|
| Product model | PSHW8074 |
| ABB order code | 1STQ009049A0000 |
| Manufacturer description | SEGR.HOR.F3B E4.2 W=800MM D=700MM |
| Product type | Horizontal segregation accessory |
| Product category | Internal switchboard segregation components |
| Segregation orientation | Horizontal |
| Designated configuration | F3B E4.2 |
| Associated circuit-breaker range | ABB Emax 2 |
| Associated circuit-breaker frame | E4.2 |
| Nominal switchboard width | 800 mm |
| Nominal switchboard depth | 700 mm |
| Nominal configuration | W800 × D700 |
| Compatible switchboard system | ABB System pro E Power |
| Primary function | Internal horizontal compartment separation |
| Application | Low-voltage switchboard assemblies incorporating the specified E4.2 configuration |
| ABB product group | System Pro E Power |
The ABB PSHW8074 is a horizontal segregation accessory for compatible ABB System pro E Power low-voltage switchboards. It is specified for the F3B E4.2 configuration and supports internal compartment separation within the designated switchboard arrangement.
The PSHW8074 is specified for a nominal switchboard width of 800 mm and depth of 700 mm. These are the designated configuration dimensions rather than independently verified overall physical dimensions of the individual component.
The PSHW8074 is identified for the ABB Emax 2 E4.2 air circuit-breaker frame in the designated F3B arrangement. Compatibility with a particular breaker installation depends on the complete System pro E Power configuration and the associated mounting components.
The PSHW8074 is a horizontal segregation accessory identified for an F3B E4.2 configuration. However, the segregation form achieved by a completed switchboard depends on the full assembly design, including all necessary barriers, compartments and mounting components. The required configuration should be verified against ABB assembly documentation.
The ABB manufacturer order code is 1STQ009049A0000. It identifies the PSHW8074 horizontal segregation accessory for the F3B E4.2 arrangement with a nominal width of 800 mm and depth of 700 mm.
ABB System pro E Power segregation accessories provide a coordinated approach to low-voltage switchboard construction, helping electrical engineers and panel builders specify system-compatible internal separation components for demanding industrial and commercial power distribution applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.