Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PSHF8092 (1STQ009038A0000) is a Form 3b horizontal segregation component for compatible ABB System Pro E Power switchboards, designated for E2.2 and E4.2 circuit-breaker configurations with a nominal enclosure width of 800 mm and depth of 900 mm.
£88.03
The ABB PSHF8092, manufacturer order code 1STQ009038A0000, is a dedicated horizontal segregation accessory for the ABB System Pro E Power low-voltage switchboard range. Identified by the manufacturer designation HORIZ.SEG.F3B E2.2/4.2 W=800MM D=900MM, this component is intended for compatible switchboard arrangements requiring Form 3b horizontal segregation associated with ABB E2.2 and E4.2 circuit-breaker configurations.
Horizontal segregation components help establish defined internal separation between functional areas of an electrical distribution assembly. The PSHF8092 supports the construction of the specified segregation arrangement within compatible System Pro E Power enclosures, helping professional panel builders implement organised compartment layouts and consistent modular switchboard designs.
Designed for a nominal switchboard width of 800 mm and depth of 900 mm, the ABB PSHF8092 provides a manufacturer-designated solution for the corresponding enclosure geometry. Its F3B designation identifies the intended Form 3b segregation arrangement, while E2.2/4.2 identifies the associated ABB circuit-breaker frame families.
Internal separation is an important consideration in the design of low-voltage switchgear and controlgear assemblies. Under IEC 61439-2, Form 3b arrangements provide separation of busbars from functional units, separation of functional units from one another, and separation of terminals for external conductors from the busbars. In a Form 3b arrangement, terminals for external conductors are also separated from their associated functional units.
The ABB PSHF8092 horizontal segregation component is intended to contribute to the manufacturer-specified F3B arrangement in a compatible System Pro E Power assembly. Its horizontal orientation supports the formation of defined internal compartment boundaries, while the E2.2/4.2 designation identifies the associated circuit-breaker frame configuration.
The specified 800 mm width and 900 mm depth are important when selecting segregation accessories for a modular switchboard. The 900 mm nominal depth distinguishes the PSHF8092 from versions intended for other enclosure depths. Correct selection must account for the enclosure dimensions, circuit-breaker arrangement, adjacent structural components and other segregation accessories required by the complete assembly design.
The PSHF8092 is an individual component within a wider switchboard system. Installing this accessory alone does not establish or certify Form 3b compliance. The achieved form of separation, electrical ratings, degree of protection and conformity with applicable standards depend on the complete assembly, its component arrangement and the relevant design verification.
| Product series | System Pro E Power |
|---|---|
| ABB order code | 1STQ009038A0000 |
| Product type | Horizontal segregation component |
| Product category | Low-voltage switchboard segregation accessories |
| Manufacturer designation | HORIZ.SEG.F3B E2.2/4.2 W=800MM D=900MM |
| Segregation arrangement | F3B / Form 3b |
| Associated circuit-breaker frames | ABB E2.2 and E4.2 |
| Nominal switchboard width | 800 mm |
| Nominal switchboard depth | 900 mm |
| Segregation orientation | Horizontal |
| Compatible system | ABB System Pro E Power |
| Primary function | Internal horizontal segregation in the specified switchboard configuration |
| Application | Low-voltage electrical distribution switchboards |
The ABB PSHF8092 is a horizontal segregation component for compatible ABB System Pro E Power low-voltage switchboards. It supports the construction of the specified Form 3b internal separation arrangement associated with ABB E2.2 and E4.2 circuit-breaker configurations.
The manufacturer designation specifies a nominal switchboard width of 800 mm and depth of 900 mm. These dimensions identify the intended enclosure configuration and should not be interpreted as verified external measurements of the individual segregation component.
F3B identifies the intended Form 3b internal segregation arrangement. The completed switchboard must incorporate all required separation components and be designed and verified appropriately to achieve the specified form of separation.
The manufacturer designation identifies ABB E2.2 and E4.2 circuit-breaker frame families. Suitability for a particular breaker installation depends on the complete System Pro E Power enclosure, mounting arrangement and associated segregation components.
The ABB manufacturer order code is 1STQ009038A0000. It identifies the PSHF8092 horizontal segregation component for the specified F3B, E2.2/4.2, 800 mm wide and 900 mm deep System Pro E Power configuration.
ABB System Pro E Power offers a modular platform for professional low-voltage electrical distribution assemblies. The ABB PSHF8092 horizontal segregation component provides a manufacturer-designated solution for compatible Form 3b arrangements associated with E2.2 and E4.2 circuit breakers in 800 mm wide and 900 mm deep switchboard configurations, supporting organised compartment construction and consistent system integration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.