Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PSHF6092 (1STQ009036A0000) is a horizontal segregation component for F3B arrangements associated with E2.2/4.2 equipment in 600 mm wide and 900 mm deep ABB System pro E Power low-voltage switchboard configurations.
£86.13
The ABB PSHF6092 (1STQ009036A0000) is a dedicated horizontal segregation component for compatible ABB System pro E Power low-voltage electrical distribution switchboards. Designed for an F3B internal separation arrangement associated with E2.2/4.2 equipment, this component is specified for switchboard structures with a nominal width of 600 mm and depth of 900 mm.
As part of the ABB System pro E Power series, the PSHF6092 supports modular switchboard construction where defined internal separation is required around compatible electrical distribution equipment. Its application is particularly relevant to professional electrical panel builders working with ABB Emax 2 E2.2 and E4.2 air circuit-breaker configurations, where correct segregation components must be selected according to the intended switchboard assembly.
The ABB PSHF6092 combines a specific F3B horizontal segregation designation with compatibility requirements for 600 mm wide × 900 mm deep switchboard configurations. Its dedicated arrangement helps manufacturers establish the intended internal compartment layout while maintaining compatibility with the appropriate ABB structural and mounting components.
Internal segregation is an important consideration in the design of low-voltage switchgear and controlgear assemblies. Correctly selected barriers and separation components help establish the intended boundaries between designated functional areas of a switchboard. Their effectiveness depends on the complete enclosure arrangement, installed electrical equipment and the manufacturer's verified assembly configuration.
The ABB PSHF6092 is specified as a horizontal segregation component for an F3B arrangement associated with E2.2/4.2 equipment. Within the System pro E Power platform, this designation helps identify the appropriate component for a particular internal separation layout involving compatible ABB Emax 2 circuit-breaker configurations.
The ABB Emax 2 range includes air circuit-breakers used in low-voltage electrical power distribution systems. E2.2 and E4.2 are equipment frame designations within this range. When these circuit-breakers are incorporated into a modular switchboard, the surrounding structural components, internal barriers and segregation accessories must be selected according to the intended equipment arrangement and ABB installation documentation.
The PSHF6092 is identified for a nominal 600 mm width and 900 mm depth. This configuration is particularly relevant where the switchboard design specifies a deeper cubicle structure. The stated dimensions identify the intended assembly configuration and should not automatically be interpreted as the exact physical measurements of the individual segregation component.
The F3B designation identifies the specified internal segregation arrangement. Although the PSHF6092 contributes to this arrangement, the component alone does not establish that a completed switchboard achieves Form 3b separation. The overall assembly, including adjoining barriers, mounting structures, circuit-breaker installation and enclosure design, must be considered together.
The ABB System pro E Power series provides a modular platform for constructing low-voltage electrical distribution switchboards for industrial facilities, commercial buildings and electrical infrastructure. Its range of internal segregation components allows panel builders to select accessories suited to different equipment layouts, cubicle dimensions and functional requirements.
Completed low-voltage switchgear and controlgear assemblies are subject to the applicable requirements of IEC 61439-1 and IEC 61439-2. The correct selection and installation of the PSHF6092 can support the intended internal separation configuration, but the overall segregation classification and electrical performance must be established through the design and verification of the complete switchboard.
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ009036A0000 |
| Product type | Horizontal segregation component |
| Product category | Switchboard internal segregation accessories |
| Segregation designation | F3B |
| Associated equipment designation | E2.2/4.2 |
| Associated circuit-breaker range | ABB Emax 2 E2.2 and E4.2 configurations |
| Nominal switchboard width | 600 mm |
| Nominal switchboard depth | 900 mm |
| Orientation | Horizontal |
| Installation position | Internal switchboard assembly |
| Compatible system | ABB System pro E Power |
| Application | Internal horizontal segregation in compatible low-voltage switchboards |
| Assembly type | Modular low-voltage switchgear and controlgear assembly |
| Suitable for | Industrial and commercial electrical distribution switchboards |
| Component function | Horizontal internal separation within the specified F3B arrangement |
The ABB PSHF6092 is a horizontal segregation component for compatible ABB System pro E Power low-voltage switchboards. It is specified for an F3B arrangement associated with E2.2/4.2 equipment in a nominal 600 mm wide and 900 mm deep switchboard configuration.
F3B identifies the specified internal segregation arrangement, while E2.2/4.2 refers to the associated ABB Emax 2 circuit-breaker frame configurations. The correct installation must follow the relevant ABB System pro E Power assembly documentation.
The PSHF6092 is specified for a nominal switchboard width of 600 mm and depth of 900 mm. These values identify the intended assembly configuration rather than independently verified physical dimensions of the individual segregation component.
Both products are horizontal segregation components for F3B arrangements associated with E2.2/4.2 equipment in ABB System pro E Power switchboards. The PSHF6092 is specified for a 600 mm wide × 900 mm deep configuration, while the PSHF6072 is specified for a 600 mm wide × 700 mm deep configuration. The correct model should be selected according to the required switchboard depth and ABB assembly arrangement.
No. The PSHF6092 is identified for an F3B segregation arrangement, but the achieved form of separation depends on the complete switchboard design, including adjoining barriers, installed equipment and mounting components. The finished assembly must be configured and verified according to the applicable ABB instructions and standards.
ABB System pro E Power accessories support modular low-voltage switchboard construction for industrial and commercial power distribution. The PSHF6092 provides a dedicated horizontal segregation component for F3B arrangements associated with E2.2/4.2 equipment in 600 mm wide and 900 mm deep configurations, helping professional panel builders maintain the intended internal separation layout within compatible ABB assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.