Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PSHW6071 is a System pro E Power horizontal Form 3b segregation accessory for designated E1.2 and T7 3-pole or 4-pole V configurations with nominal dimensions of 600 x 700 mm.
£76.70
The ABB PSHW6071 is a dedicated horizontal segregation accessory for the ABB System pro E Power low-voltage switchboard system. Designed for Form 3b internal separation, this component is specified for configurations incorporating ABB Emax 2 E1.2 and Tmax T7 circuit breakers, supporting both 3-pole and 4-pole arrangements in the designated V configuration.
With nominal dimensions of 600 mm × 700 mm, the PSHW6071 supports the construction of compatible circuit breaker compartments requiring horizontal separation. Its application-specific design helps electrical panel builders organise internal switchboard sections while maintaining the intended segregation arrangement within the modular System pro E Power platform.
Identified by ABB manufacturer order code 1STQ009032A0000, the PSHW6071 is intended for professional low-voltage switchgear assembly, including industrial and commercial electrical distribution boards. Its defined Form 3b designation, breaker compatibility and nominal dimensions make it a suitable choice for specified ABB switchboard configurations.
Internal segregation helps establish the required separation between designated functional units, busbars and terminal areas within a low-voltage switchboard. The ABB PSHW6071 is specified as a horizontal segregation component for Form 3b arrangements incorporating E1.2 and T7 circuit breaker configurations. It supports the construction of organised internal compartments within compatible ABB System pro E Power assemblies.
The PSHW6071 is designated for 3-pole and 4-pole V configurations with nominal dimensions of 600 mm × 700 mm. It should be selected alongside the appropriate ABB mounting, enclosure and segregation components. Achieving the intended Form 3b separation depends on the complete switchboard design, correct component selection and installation in accordance with the applicable ABB assembly instructions.
| Brand | ABB |
|---|---|
| Manufacturer order code | 1STQ009032A0000 |
| Product group | System pro E Power |
| Product type | Horizontal segregation accessory |
| Product category | Switchboard Segregation Accessories |
| Segregation form | Form 3b |
| Designated breaker families | Emax 2 E1.2 and Tmax T7 |
| Supported pole arrangements | 3-pole / 4-pole |
| Configuration | V |
| Nominal first dimension | 600 mm |
| Nominal second dimension | 700 mm |
| Compatible switchboard system | ABB System pro E Power |
| Primary application | Internal horizontal compartment segregation |
The ABB PSHW6071 is a horizontal segregation accessory designed for compatible ABB System pro E Power switchboard assemblies requiring Form 3b internal separation.
The PSHW6071 is specified for designated configurations incorporating ABB Emax 2 E1.2 and ABB Tmax T7 circuit breakers.
Yes. The product designation specifies compatibility with designated 3-pole and 4-pole circuit breaker configurations.
The PSHW6071 is specified for nominal dimensions of 600 mm × 700 mm. These values identify the intended switchboard arrangement and should not automatically be treated as the exact physical dimensions of the individual accessory.
Form 3b is an internal separation arrangement involving separation of busbars from functional units, separation between functional units and separation of terminals from the busbars. The complete switchboard must be designed and assembled to achieve the applicable separation requirements.
No. The PSHW6071 is an individual horizontal segregation component. Additional compatible components may be required to complete the intended Form 3b switchboard arrangement.
Both products are horizontal Form 3b segregation accessories for designated E1.2 and T7 configurations. The PSHW6071 is specified for 600 mm × 700 mm, while the PSHW8071 is specified for 800 mm × 700 mm.
Both products are specified for Form 3b E1.2 and T7 configurations with a nominal first dimension of 600 mm. The PSHW6071 has a nominal second dimension of 700 mm, compared with 500 mm for the PSHW6051.
The ABB manufacturer order code is 1STQ009032A0000.
The ABB PSHW6071 forms part of the System pro E Power segregation accessory range, providing a dedicated horizontal component for compatible Form 3b E1.2 and T7 circuit breaker compartments. Its specified 600 mm × 700 mm configuration supports accurate component selection and consistent internal compartment arrangements in professional low-voltage switchboard projects.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.