Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PCVS2258 (1STQ009012A0000) is a P2 cubicle component for nominal 250 mm high and 800 mm wide compartment arrangements, designed for compatible ABB System Pro E Power low-voltage switchboard assemblies.
£152.00
The ABB PCVS2258, manufacturer order code 1STQ009012A0000, is a dedicated P2 cubicle accessory designed for the ABB System Pro E Power low-voltage switchboard range. Intended for compatible modular electrical distribution assemblies, this component supports the construction of defined internal cubicle arrangements, helping panel builders create organised and consistent switchboard layouts.
As part of the ABB System Pro E Power modular enclosure system, the PCVS2258 is specified for a P2 cubicle configuration. Its manufacturer-defined arrangement supports the selection of appropriate components for switchboards requiring the corresponding internal compartment layout, with installation dependent on the enclosure framework and associated ABB accessories.
With a specified nominal height of 250 mm and width of 800 mm, the ABB PCVS2258 is intended for the corresponding System Pro E Power cubicle arrangement. The manufacturer's designation CUBICLE P2 H=250MM W=800MM identifies this product as a P2 cubicle component for the specified modular configuration.
Modular cubicle components support the construction of organised low-voltage electrical distribution switchboards. By establishing defined internal compartment arrangements, they help panel builders coordinate the positioning of electrical equipment, structural elements and associated enclosure accessories. Consistent modular dimensions also support repeatable assembly practices across compatible switchboard configurations.
The ABB PCVS2258 P2 cubicle component is designed for the corresponding arrangement within the System Pro E Power platform. Its nominal 250 mm height and 800 mm width identify the intended cubicle geometry, while the P2 designation distinguishes the required manufacturer-defined configuration. The relatively low nominal height and wider format make this model appropriate where the switchboard design specifies this particular compartment arrangement.
The ABB System Pro E Power range provides a modular platform for low-voltage power distribution assemblies with configurable internal compartments and accessories. The overall electrical ratings, degree of protection, form of separation and compliance with applicable standards, including IEC 61439 where relevant, depend on the design and verification of the complete switchboard rather than the individual PCVS2258 component alone.
| Series | System Pro E Power |
|---|---|
| Product family | PCVS |
| ABB order code | 1STQ009012A0000 |
| Product type | P2 cubicle component |
| Product category | Low-voltage switchboard enclosure accessories |
| Manufacturer designation | CUBICLE P2 H=250MM W=800MM |
| Nominal cubicle height | 250 mm |
| Nominal cubicle width | 800 mm |
| Configuration | P2 |
| Installation arrangement | Integration within compatible modular switchboard assemblies |
| Compatible system | ABB System Pro E Power |
| Primary function | Construction of the specified internal cubicle arrangement |
| Application | Low-voltage electrical distribution switchboards |
The ABB PCVS2258 is a P2 cubicle component used in compatible ABB System Pro E Power low-voltage switchboards to support the construction of a defined modular compartment arrangement.
The manufacturer designation specifies a nominal cubicle height of 250 mm and width of 800 mm. These dimensions identify the intended modular configuration and do not necessarily represent the external measurements of every individual component in the assembly.
P2 is the manufacturer-defined cubicle configuration specified for the PCVS2258. The correct P2 component should be selected according to the intended ABB System Pro E Power switchboard arrangement.
The ABB manufacturer order code is 1STQ009012A0000, corresponding to the PCVS2258 P2 cubicle component with a nominal height of 250 mm and width of 800 mm.
The PCVS2258 belongs to the ABB System Pro E Power modular low-voltage switchboard range. It is intended for compatible P2 cubicle arrangements, with installation suitability determined by the enclosure structure and complete assembly configuration.
ABB System Pro E Power provides a modular platform for professional low-voltage electrical distribution assemblies. The ABB PCVS2258 P2 cubicle component offers a manufacturer-defined solution for compatible 250 mm high and 800 mm wide cubicle arrangements, supporting organised internal layouts, consistent modular construction and integration within the System Pro E Power range.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.