Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ009001A0000 ABB PCVS2504 P2 Cubicle Kit 500 mm x 400 mm
ABB PCVS2504 (1STQ009001A0000) is a P2 cubicle component for nominal 500 mm high and 400 mm wide compartment arrangements, designed for compatible ABB System Pro E Power low-voltage switchboard assemblies.
£144.84
Why Choose the ABB PCVS2504 P2 Cubicle Kit?
The ABB PCVS2504, manufacturer order code 1STQ009001A0000, is a dedicated P2 cubicle accessory designed for the ABB System Pro E Power low-voltage switchboard range. Intended for compatible modular electrical distribution assemblies, this component supports the construction of defined internal cubicle arrangements, helping panel builders achieve organised, consistent and professionally engineered switchboard layouts.
As part of the ABB System Pro E Power modular enclosure system, the PCVS2504 is specified for a P2 cubicle configuration. Its manufacturer-defined arrangement enables selection for switchboard assemblies requiring the corresponding internal compartment layout, with installation dependent on the associated enclosure framework and compatible ABB accessories.
With a specified nominal height of 500 mm and width of 400 mm, the ABB PCVS2504 is intended for the corresponding System Pro E Power cubicle arrangement. The manufacturer's designation CUBICLE P2 H=500MM W=400MM identifies the product as a P2 cubicle component for this particular modular configuration.
Key Advantages
- Genuine ABB System Pro E Power switchboard accessory for compatible low-voltage electrical distribution assemblies.
- P2 cubicle configuration designed for the corresponding modular enclosure arrangement.
- 500 mm nominal height and 400 mm nominal width for straightforward specification and component selection.
- Supports the construction of organised internal compartments within electrical switchboards.
- Designed for integration with compatible ABB System Pro E Power structural and enclosure components.
- Helps panel builders maintain consistent modular dimensions across switchboard assemblies.
- Suitable for new electrical distribution projects and compatible switchboard refurbishment.
- Manufacturer-specific identification simplifies ordering and replacement part selection.
Key Features
- ABB System Pro E Power modular low-voltage switchboard series.
- PCVS2504 manufacturer model designation.
- 1STQ009001A0000 ABB order code.
- P2 cubicle component for compatible switchboard assemblies.
- 500 mm nominal cubicle height.
- 400 mm nominal cubicle width.
- P2 manufacturer-defined configuration.
- Designed for integration within compatible System Pro E Power modular enclosure structures.
- Supports defined internal electrical distribution compartment arrangements.
- Suitable for professional electrical panel building and switchboard assembly.
- Dedicated ABB accessory for the specified cubicle geometry.
Modular P2 Cubicle Integration for Electrical Switchboards
Modular cubicle components support the construction of organised low-voltage electrical distribution switchboards. By establishing defined internal compartment arrangements, they help panel builders coordinate the positioning of electrical equipment, structural elements and associated enclosure accessories. Consistent modular dimensions also support repeatable assembly practices across compatible switchboard configurations.
The ABB PCVS2504 P2 cubicle component is designed for the corresponding arrangement within the System Pro E Power platform. Its nominal 500 mm height and 400 mm width identify the intended cubicle geometry, while the P2 designation distinguishes the required manufacturer-defined configuration. Selecting the correct component is important when coordinating the enclosure structure with the intended internal layout.
The ABB System Pro E Power range provides a modular platform for low-voltage power distribution assemblies with configurable internal compartments and accessories. The overall electrical ratings, degree of protection, form of separation and compliance with applicable standards, including IEC 61439 where relevant, depend on the design and verification of the complete switchboard rather than the individual PCVS2504 component alone.
Typical Applications
- ABB System Pro E Power low-voltage distribution switchboards.
- Compatible P2 modular cubicle arrangements.
- Industrial electrical distribution assemblies.
- Commercial building power distribution switchboards.
- Internal compartment construction in modular electrical enclosures.
- Professional switchboard manufacturing and electrical panel building.
- Switchboard projects requiring a nominal 500 mm high and 400 mm wide P2 cubicle configuration.
- Maintenance, refurbishment and replacement of compatible System Pro E Power cubicle accessories.
Technical Specifications
| Series | System Pro E Power |
|---|---|
| Product family | PCVS |
| ABB order code | 1STQ009001A0000 |
| Product type | P2 cubicle component |
| Product category | Low-voltage switchboard enclosure accessories |
| Manufacturer designation | CUBICLE P2 H=500MM W=400MM |
| Nominal cubicle height | 500 mm |
| Nominal cubicle width | 400 mm |
| Configuration | P2 |
| Installation arrangement | Integration within compatible modular switchboard assemblies |
| Compatible system | ABB System Pro E Power |
| Primary function | Construction of the specified internal cubicle arrangement |
| Application | Low-voltage electrical distribution switchboards |
Frequently Asked Questions
What is the ABB PCVS2504 used for?
The ABB PCVS2504 is a P2 cubicle component used in compatible ABB System Pro E Power low-voltage switchboards to support the construction of a defined modular compartment arrangement.
What are the dimensions of the ABB PCVS2504?
The manufacturer designation specifies a nominal cubicle height of 500 mm and width of 400 mm. These dimensions identify the intended modular configuration and do not necessarily represent the external measurements of every individual component in the assembly.
What does P2 mean in the ABB PCVS2504 designation?
P2 is the manufacturer-defined cubicle configuration specified for the PCVS2504. The correct P2 component should be selected according to the intended ABB System Pro E Power switchboard arrangement.
What is the ABB order code for the PCVS2504?
The ABB manufacturer order code is 1STQ009001A0000, corresponding to the PCVS2504 P2 cubicle component with a nominal height of 500 mm and width of 400 mm.
Which switchboard systems are compatible with the ABB PCVS2504?
The PCVS2504 belongs to the ABB System Pro E Power modular low-voltage switchboard range. It is intended for compatible P2 cubicle arrangements, with installation suitability determined by the enclosure structure and complete assembly configuration.
Trusted ABB Switchboard Components for Professional Installations
ABB System Pro E Power provides a modular platform for professional low-voltage electrical distribution assemblies. The ABB PCVS2504 P2 cubicle component offers a manufacturer-defined solution for compatible 500 mm high and 400 mm wide cubicle arrangements, supporting organised internal layouts, consistent modular construction and integration within the System Pro E Power range.
