Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PCVS1356 (1STQ008974A0000) is a P1 cubicle accessory for compatible System pro E Power low-voltage distribution switchboards. It is specified for a nominal cubicle height of 350 mm and width of 600 mm in the manufacturer-designated P1 assembly configuration.
£125.91
The ABB PCVS1356, manufacturer order code 1STQ008974A0000, is a dedicated P1 cubicle accessory for ABB System pro E Power low-voltage distribution switchboards. Identified by the manufacturer designation CUBICLE P1 H=350MM W=600MM, this component is specified for a nominal 350 mm height and 600 mm width.
Designed for compatible P1 assembly configurations, the PCVS1356 forms part of ABB's coordinated modular switchboard accessory range. Its defined cubicle dimensions help electrical panel builders select components that correspond to the intended internal compartment arrangement, supporting organised and consistent low-voltage distribution panel construction.
The ABB PCVS1356 System pro E Power cubicle is suitable for professional switchboard manufacturing, industrial power distribution projects and commercial electrical installations requiring the specified 350 mm × 600 mm nominal P1 cubicle configuration. Correct integration depends on the selected switchboard structure and the applicable ABB assembly documentation.
Modular low-voltage switchboards rely on correctly selected structural and compartment accessories to establish their intended internal layouts. Cubicle configurations must be coordinated with the overall switchboard design, including the designated assembly position, nominal compartment dimensions and compatible supporting components.
The ABB PCVS1356 P1 cubicle is identified for a nominal 350 mm height and 600 mm width. These values describe the specified cubicle arrangement and should not be interpreted as a complete set of physical component dimensions. Electrical panel builders should confirm the installation requirements against the relevant ABB System pro E Power documentation.
The manufacturer's P1 designation is a key selection characteristic. It identifies the assembly position associated with this cubicle accessory, distinguishing it from components intended for P0 or other installation configurations. Matching the correct position is important when coordinating the cubicle with the remainder of the switchboard assembly.
As part of the ABB System pro E Power platform, the PCVS1356 is intended to be selected alongside compatible switchboard structural elements and other accessories required by the specified compartment layout. The complete arrangement should be checked for mechanical compatibility, installation requirements and the intended electrical distribution application.
Where internal segregation is required, the appropriate separation components must be selected as part of the complete assembly. The PCVS1356 designation alone does not establish a particular segregation form, material specification or electrical performance rating.
The PCVS1356 is a switchboard cubicle accessory, not a complete electrical distribution board, circuit breaker or standalone protection device. Its role is to support the specified internal cubicle configuration within a correctly designed and assembled ABB System pro E Power switchboard.
| Product range | System pro E Power |
|---|---|
| ABB order code | 1STQ008974A0000 |
| Manufacturer designation | CUBICLE P1 H=350MM W=600MM |
| Product type | P1 cubicle accessory |
| Product category | Low-voltage switchboard cubicle accessories |
| Nominal cubicle height | 350 mm |
| Nominal cubicle width | 600 mm |
| Assembly position | P1 |
| Configuration | Cubicle P1 |
| Functional purpose | Compatible internal switchboard cubicle arrangement |
| Compatible system | ABB System pro E Power |
| Primary application | Low-voltage distribution switchboards |
| Component classification | Modular switchboard accessory |
The ABB PCVS1356 is a P1 cubicle accessory designed for compatible ABB System pro E Power low-voltage switchboards. It supports the specified internal cubicle arrangement in the manufacturer-designated P1 assembly configuration.
The PCVS1356 is specified for a nominal 350 mm height and 600 mm width. These values identify the intended cubicle configuration rather than a complete set of physical component dimensions.
The ABB manufacturer order code is 1STQ008974A0000, corresponding to the PCVS1356 P1 cubicle accessory in the System pro E Power range.
P1 identifies the manufacturer-designated assembly position for this cubicle accessory. The PCVS1356 must be matched to a compatible P1 switchboard configuration using the applicable ABB installation documentation.
No. The PCVS1356 is a modular switchboard cubicle accessory, not a complete electrical distribution board. It is intended for use within a compatible ABB System pro E Power assembly alongside the required structural and electrical components.
ABB System pro E Power provides a coordinated range of modular structures and accessories for professional low-voltage electrical distribution. The ABB PCVS1356 P1 cubicle, order code 1STQ008974A0000, offers a dedicated 350 mm high, 600 mm wide configuration for compatible switchboard assemblies, supporting organised compartment layouts and consistent electrical panel construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.