Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PCVS1404 is a System pro E Power cubicle accessory, order code 1STQ008967A0000, designed for P1 switchboard configurations with a nominal height of 400 mm and width of 400 mm in modular low-voltage electrical distribution assemblies.
£120.98
The ABB PCVS1404 is a purpose-designed cubicle segregation accessory for the ABB System pro E Power low-voltage switchboard system. Specified for the P1 cubicle configuration, with a nominal height of 400 mm and width of 400 mm, this component supports the internal arrangement and compartmentalisation of modular electrical distribution assemblies.
As part of the ABB System pro E Power range, the PCVS1404 is intended for integration with compatible switchboard cubicles and internal partitioning components. Its application-specific configuration helps electrical panel builders establish organised separation between designated equipment areas while maintaining consistency with the modular switchboard design.
With its 400 mm × 400 mm nominal cubicle configuration, the PCVS1404 is suitable for specified P1 arrangements in industrial, commercial and infrastructure electrical distribution installations. Identified by ABB manufacturer order code 1STQ008967A0000, this accessory provides a dedicated solution for professional low-voltage switchboard construction.
Modular low-voltage switchboards require appropriately selected internal components to support the intended arrangement of electrical equipment and compartments. The ABB PCVS1404 is designated for a P1 cubicle configuration measuring 400 mm high by 400 mm wide, making it suitable for the corresponding ABB System pro E Power assembly arrangements.
The ABB System pro E Power platform provides a modular approach to constructing main distribution boards using compatible enclosures, internal supports and segregation accessories. The PCVS1404 must be selected and installed according to the relevant ABB assembly instructions. The electrical protection and segregation characteristics of the completed switchboard depend on the full assembly configuration rather than any individual accessory.
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ008967A0000 |
| Product type | Cubicle segregation accessory |
| Product category | Switchboard Segregation Accessories |
| Compatible system | ABB System pro E Power |
| Cubicle configuration | P1 |
| Nominal cubicle height | 400 mm |
| Nominal cubicle width | 400 mm |
| Installation type | Internal switchboard cubicle assembly |
| Primary application | Internal cubicle compartmentalisation |
| Application environment | Low-voltage electrical distribution assemblies |
| Product group | System pro E Power |
The ABB PCVS1404 is a cubicle accessory intended for compatible ABB System pro E Power low-voltage switchboard configurations, supporting internal compartment arrangement and segregation.
The PCVS1404 belongs to the ABB System pro E Power range of modular low-voltage main distribution board components.
The PCVS1404 is specified for a cubicle configuration with a nominal 400 mm height and 400 mm width. These dimensions describe the intended cubicle arrangement rather than necessarily representing the exact external dimensions of the accessory.
P1 identifies the designated cubicle configuration within the ABB System pro E Power modular switchboard system. The PCVS1404 is specifically identified for this configuration.
No. The PCVS1404 is a System pro E Power cubicle accessory intended for integration into a compatible switchboard assembly rather than use as a complete standalone electrical enclosure.
Yes. The PCVS1404 is intended for compatible ABB System pro E Power low-voltage distribution assemblies, including industrial switchboard installations using the specified P1 cubicle configuration.
The PCVS1404 is an internal cubicle accessory, and no independent IP protection rating is specified here. The protection rating of the finished switchboard depends on the complete enclosure and assembly design.
P0 and P1 identify different designated cubicle positions or configurations within the ABB System pro E Power system. Accessories must be selected for the specified configuration, and compatibility should be checked against the relevant ABB assembly documentation.
The ABB manufacturer order code is 1STQ008967A0000, corresponding to the PCVS1404 cubicle accessory for a P1 configuration with nominal dimensions of 400 mm × 400 mm.
ABB System pro E Power components support the construction of modular low-voltage electrical distribution assemblies. The PCVS1404 P1 cubicle accessory provides a dedicated component for compatible 400 mm × 400 mm configurations, helping professional panel builders maintain organised and consistent switchboard construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.