Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PRBS1220 (1STQ008916A0000) is a rear vertical segregation accessory for compatible System pro E Power low-voltage switchboards, specified for a nominal height of 1000 mm and width of 200 mm in the manufacturer-designated INT.CC configuration.
£34.37
The ABB PRBS1220, manufacturer order code 1STQ008916A0000, is a dedicated rear vertical segregation accessory for ABB System pro E Power low-voltage distribution switchboards. Identified by the manufacturer designation SEGR.VERT.REAR INT.CC H=1000MM W=200MM, this component is specified for a nominal 1000 mm height and 200 mm width.
Designed for compatible internal switchboard compartment arrangements, the PRBS1220 provides a mechanical partitioning solution where rear vertical separation is required. Its INT.CC configuration distinguishes it from other rear segregation accessories in the System pro E Power range, making the precise product designation important when selecting components for an engineered electrical distribution assembly.
As part of ABB's modular low-voltage switchboard system, the PRBS1220 supports organised internal compartment layouts and coordinated installation with compatible structural and segregation accessories. It is suitable for professional electrical panel builders, industrial power distribution projects and commercial switchboard applications requiring the specified 1000 mm × 200 mm rear vertical segregation configuration.
Internal segregation is an important aspect of low-voltage switchboard design. Mechanical partitions help establish physical boundaries between designated functional areas, supporting organised compartment layouts and the implementation of specified internal separation arrangements.
The ABB PRBS1220 rear vertical segregation is intended for compatible System pro E Power switchboard configurations requiring a rear partition with a nominal height of 1000 mm and width of 200 mm. These values describe the designated installation size and should not be confused with a complete set of physical component or packaging dimensions.
The manufacturer's INT.CC designation is a key selection characteristic. It identifies a particular internal configuration within the ABB accessory range. Because different segregation components may share similar nominal dimensions while serving different structural arrangements, panel builders should verify the exact configuration against the relevant ABB System pro E Power technical documentation.
The PRBS1220 can form part of a coordinated internal separation arrangement using compatible rear partitions, lateral segregation components, horizontal dividers and other switchboard accessories. The required segregation form and overall assembly performance depend on the complete design, correct component selection and installation in accordance with the applicable manufacturer's instructions.
As a mechanical segregation accessory, the PRBS1220 does not function as a circuit breaker, electrical protection device or complete main distribution board. Its role is to contribute to physical compartment separation within an appropriately designed and assembled low-voltage electrical distribution system.
| Product range | System pro E Power |
|---|---|
| ABB order code | 1STQ008916A0000 |
| Manufacturer designation | SEGR.VERT.REAR INT.CC H=1000MM W=200MM |
| Product type | Rear vertical segregation accessory |
| Product category | Low-voltage switchboard segregation accessories |
| Nominal segregation height | 1000 mm |
| Nominal segregation width | 200 mm |
| Installation orientation | Vertical |
| Installation position | Rear |
| Configuration designation | INT.CC |
| Functional purpose | Internal mechanical segregation of switchboard compartments |
| Compatible system | ABB System pro E Power |
| Primary application | Low-voltage electrical distribution switchboards |
| Component classification | Mechanical switchboard accessory |
The ABB PRBS1220 is a rear vertical segregation accessory for compatible ABB System pro E Power low-voltage switchboards. It provides a mechanical partition for designated internal separation arrangements.
The PRBS1220 is specified for a nominal 1000 mm height and 200 mm width. These measurements identify the intended segregation configuration rather than a complete set of external component dimensions.
The ABB manufacturer order code is 1STQ008916A0000, corresponding to the PRBS1220 rear vertical segregation accessory in the System pro E Power range.
INT.CC is the manufacturer's configuration identifier for this rear vertical segregation accessory. Its precise installation arrangement should be confirmed against ABB System pro E Power technical documentation before selecting complementary components.
No. The PRBS1220 is an internal mechanical segregation accessory, not a complete electrical distribution board. It is intended for installation within a compatible ABB System pro E Power switchboard assembly alongside the required structural and electrical components.
ABB System pro E Power offers a coordinated range of modular structures and segregation accessories for professional low-voltage power distribution. The ABB PRBS1220 rear vertical segregation, order code 1STQ008916A0000, provides a dedicated 1000 mm high, 200 mm wide solution for compatible INT.CC switchboard configurations, supporting organised internal separation and consistent electrical panel construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.