Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008910A0000 ABB PLVS3592 Vertical Side Segregation Panel 350 mm for 900 mm Deep System Pro E Power Switchboards
ABB PLVS3592 (1STQ008910A0000) is a vertical side segregation panel with a nominal height of 350 mm, designed for internal compartment separation in 900 mm deep ABB System Pro E Power low-voltage switchboard structures incorporating an intermediate upright.
£44.18
Why Choose the ABB PLVS3592 Vertical Side Segregation Panel?
The ABB PLVS3592, manufacturer order code 1STQ008910A0000, is a specialist vertical side segregation panel designed for use within the ABB System Pro E Power low-voltage switchboard range. This internal enclosure accessory supports physical separation between designated compartments, helping panel builders create organised electrical distribution assemblies with clearly defined internal sections.
As part of the ABB System Pro E Power modular switchboard system, the PLVS3592 is intended for lateral segregation arrangements in compatible structures incorporating an intermediate upright. Its dedicated configuration enables integration with the corresponding switchboard framework, supporting consistent compartment layouts and professional electrical panel construction.
With a specified nominal height of 350 mm and compatibility with 900 mm deep switchboard structures, the ABB PLVS3592 is designed for internal vertical segregation where an intermediate upright is present. The manufacturer's designation SEGR.VERT.LAT. H=350MM D=900MM INT.UP. identifies the component as a vertical lateral segregation accessory for this particular System Pro E Power configuration.
Key Advantages
- Genuine ABB System Pro E Power switchboard accessory designed for compatible low-voltage distribution assemblies.
- Vertical side segregation design supports physical separation between designated internal compartments.
- 350 mm nominal height suitable for the specified modular compartment arrangement.
- Designed for compatible 900 mm deep switchboard structures.
- Intermediate upright configuration supports integration with the corresponding internal enclosure framework.
- Provides a dedicated mechanical partition for organised switchboard construction.
- Supports modular assembly and internal segregation arrangements within the System Pro E Power range.
- Manufacturer-specific design facilitates accurate component selection for switchboard assembly, maintenance and refurbishment.
Key Features
- ABB System Pro E Power modular low-voltage switchboard series.
- PLVS3592 manufacturer model designation.
- 1STQ008910A0000 ABB order code.
- Vertical lateral segregation panel for internal switchboard compartment separation.
- 350 mm nominal segregation height.
- 900 mm nominal enclosure depth compatibility.
- INT.UP. configuration for structures incorporating an intermediate upright.
- Designed for lateral installation within compatible modular switchboard arrangements.
- Supports physical separation of designated functional areas within electrical distribution assemblies.
- Compatible with the modular construction principles of ABB System Pro E Power.
- Suitable for professional electrical panel building and switchboard integration.
- Dedicated mechanical segregation accessory for the specified enclosure configuration.
Reliable Vertical Segregation for Low-Voltage Switchboards
Internal segregation is an important consideration in the design and construction of low-voltage electrical switchboards. Mechanical partitions help establish physical boundaries between designated functional units and other internal areas, supporting organised equipment layouts and the implementation of the intended compartment separation arrangement.
The ABB PLVS3592 vertical side segregation panel is designed to contribute to these arrangements within compatible System Pro E Power switchboard structures. Its nominal 350 mm height and suitability for 900 mm deep enclosures make it appropriate for the corresponding modular configuration. The intermediate upright designation identifies the required structural arrangement for installation.
The ABB System Pro E Power platform supports modular electrical distribution assemblies with configurable internal layouts. Accessories such as the PLVS3592 enable panel builders to select segregation components according to the dimensions and structural requirements of the switchboard. The overall form of separation, electrical protection characteristics and compliance with applicable standards, including IEC 61439 where relevant, depend on the complete assembly design and verification rather than the individual partition alone.
Typical Applications
- ABB System Pro E Power low-voltage distribution switchboards.
- Vertical side segregation of designated electrical compartments.
- Switchboard structures incorporating intermediate uprights.
- Compatible 900 mm deep modular switchboard enclosures.
- Industrial main power distribution assemblies.
- Commercial building electrical distribution systems.
- Modular switchboard manufacturing and electrical panel building.
- Maintenance, refurbishment and replacement of compatible internal segregation components.
Technical Specifications
| Series | System Pro E Power |
|---|---|
| Product family | PLVS |
| ABB order code | 1STQ008910A0000 |
| Product type | Vertical side segregation panel |
| Product category | Low-voltage switchboard enclosure accessories |
| Manufacturer designation | SEGR.VERT.LAT. H=350MM D=900MM INT.UP. |
| Nominal segregation height | 350 mm |
| Compatible enclosure depth | 900 mm |
| Segregation orientation | Vertical |
| Segregation position | Lateral / side |
| Configuration | With intermediate upright (INT.UP.) |
| Mounting type | Internal switchboard assembly installation |
| Compatible system | ABB System Pro E Power |
| Primary function | Internal physical separation of designated switchboard compartments |
| Application | Low-voltage electrical distribution assemblies |
Frequently Asked Questions
What is the ABB PLVS3592 used for?
The ABB PLVS3592 is a vertical side segregation panel used to provide physical separation between designated internal compartments in compatible ABB System Pro E Power low-voltage switchboards.
What are the dimensions of the ABB PLVS3592?
The PLVS3592 has a specified nominal segregation height of 350 mm and is intended for compatible switchboard structures with a nominal depth of 900 mm. These are system configuration dimensions rather than the complete external measurements of the individual panel.
What does INT.UP. mean in the ABB PLVS3592 designation?
INT.UP. identifies the configuration intended for switchboard structures incorporating an intermediate upright. The correct segregation panel must be selected according to the internal framework of the System Pro E Power assembly.
What is the ABB order code for the PLVS3592?
The ABB manufacturer order code is 1STQ008910A0000, corresponding to the PLVS3592 vertical lateral segregation panel in the System Pro E Power range.
Which switchboard systems are compatible with the ABB PLVS3592?
The PLVS3592 belongs to the ABB System Pro E Power modular switchboard range and is intended for specified vertical lateral segregation arrangements in structures with intermediate uprights and a nominal depth of 900 mm. Compatibility must be checked against the complete enclosure and internal assembly configuration.
Trusted ABB Switchboard Components for Professional Installations
ABB System Pro E Power provides a modular platform for professional low-voltage electrical distribution assemblies. The ABB PLVS3592 vertical side segregation panel offers a manufacturer-designated solution for incorporating physical compartment separation into compatible 350 mm high, 900 mm deep switchboard configurations with an intermediate upright, supporting organised construction and dependable system integration.
