Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PLVS2092 is a System pro E Power vertical lateral segregation component measuring 200 mm high and 900 mm deep for compatible low-voltage switchboard configurations with an intermediate upright.
£40.05
The ABB PLVS2092 is a vertical lateral segregation component from the ABB System pro E Power range, designed for compatible low-voltage electrical distribution switchboards. With a specified 200 mm height and 900 mm depth, this accessory supports internal compartment separation in modular switchboard assemblies incorporating an intermediate upright.
Identified by ABB order code 1STQ008906A0000, the PLVS2092 provides a manufacturer-specific segregation solution for electrical panel builders and switchgear manufacturers. Its lateral configuration makes it suitable for designated side separation arrangements within compatible System pro E Power switchboard structures.
The PLVS2092 is intended for professional switchboard construction where component dimensions, mounting positions and internal structural arrangements must be coordinated. Its 200 mm high × 900 mm deep specification allows engineers to identify the appropriate segregation accessory for the intended assembly configuration.
Internal segregation is an important consideration in the design of low-voltage electrical distribution assemblies. The ABB PLVS2092 provides a dedicated vertical lateral segregation element for compatible System pro E Power switchboard arrangements, supporting the formation of defined boundaries between designated internal compartments.
The component's 200 mm height and 900 mm depth are essential selection characteristics. These dimensions should be matched to the intended switchboard layout, while the intermediate upright designation identifies the corresponding structural arrangement. The PLVS2092 should not be assumed interchangeable with components intended for configurations without intermediate uprights.
As a mechanical segregation accessory, the PLVS2092 does not independently provide electrical fault protection or establish a certified form of internal separation. The achieved segregation arrangement depends on the complete switchboard design, associated barriers, mounting components and correct installation. Where applicable, the completed assembly must be assessed against relevant IEC/EN 61439 requirements.
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ008906A0000 |
| Manufacturer description | SEGR.VERT.LAT. H=200MM D=900MM INT.UP. |
| Product category | Switchboard Segregation Accessories |
| Product type | Vertical lateral segregation component |
| Nominal height | 200 mm |
| Nominal depth | 900 mm |
| Segregation orientation | Vertical |
| Segregation position | Lateral |
| Structural configuration | Intermediate upright |
| Associated system | ABB System pro E Power |
| Primary function | Internal switchboard compartment segregation |
The ABB PLVS2092 is a vertical lateral segregation component used to support internal compartment separation within compatible ABB System pro E Power low-voltage switchboards.
The PLVS2092 has a specified nominal height of 200 mm and depth of 900 mm.
Yes. The PLVS2092 is designated for a switchboard configuration incorporating an intermediate upright.
The PLVS2092 belongs to the ABB System pro E Power range of modular low-voltage switchboard equipment and accessories.
The PLVS2092 is intended for vertical lateral segregation within compatible System pro E Power switchboard structures. Its precise mounting position should follow the applicable ABB assembly instructions.
Both components are specified for 900 mm deep vertical lateral segregation arrangements with an intermediate upright. The PLVS2092 has a nominal height of 200 mm, while the PLVS2592 has a nominal height of 250 mm.
No. The PLVS2092 is a mechanical segregation accessory rather than an electrical protective device. Appropriate circuit protection must be provided separately within the completed switchboard.
Not independently. The achieved form of internal separation depends on the complete switchboard design, associated segregation components and assembly configuration.
The ABB manufacturer order code is 1STQ008906A0000.
ABB System pro E Power segregation accessories support professional modular switchboard construction and organised low-voltage electrical distribution assemblies. The ABB PLVS2092 provides electrical panel builders, switchgear manufacturers and consulting engineers with a clearly identified component for compatible vertical lateral segregation arrangements incorporating intermediate uprights.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.