Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008898A0000 ABB PLVS2572 Vertical Side Segregation 250 mm x 700 mm System pro E Power
ABB PLVS2572 (1STQ008898A0000) is a pickled steel vertical side segregation accessory for 250 mm high compartments in 700 mm deep System pro E Power switchboards, designed for compatible installations incorporating an intermediate rear upright.
£39.86
Why Choose the ABB PLVS2572 System pro E Power Vertical Side Segregation?
The ABB PLVS2572, manufacturer order code 1STQ008898A0000, is a dedicated vertical side segregation accessory for ABB System pro E Power low-voltage distribution switchboards. Specified for a nominal 250 mm compartment height and 700 mm switchboard depth, this component provides mechanical separation within compatible electrical distribution assemblies incorporating an intermediate rear upright.
As part of the ABB System pro E Power range, the PLVS2572 is designed for lateral segregation within switchboard structures incorporating an intermediate rear upright and a rear structural upright. Its dedicated construction supports organised circuit-breaker compartments and helps panel builders establish the internal separation arrangements required for professional low-voltage power distribution.
Manufactured from pickled steel sheet, the PLVS2572 provides a durable mechanical partition for industrial and commercial switchboard construction. Its actual component dimensions of 245 mm height and 490.7 mm width distinguish the physical accessory from its nominal installation designation. With a reported net weight of approximately 1.4 kg, it offers a practical solution for compatible modular electrical enclosure assemblies.
Key Advantages
- Purpose-designed vertical side segregation accessory for ABB System pro E Power switchboards.
- 250 mm nominal compartment height for compatible internal separation arrangements.
- Designed for switchboard structures with a nominal 700 mm depth.
- Suitable for configurations incorporating an intermediate rear upright.
- Provides physical separation between designated internal switchboard areas.
- Durable pickled steel sheet construction for professional electrical enclosure applications.
- Supports compatible Form 3b internal segregation arrangements when installed with the necessary complementary components.
- Can be incorporated into other supported internal segregation configurations, subject to the complete assembly design.
- Actual component dimensions support accurate selection and replacement.
- Part of ABB's coordinated modular low-voltage power distribution system.
Key Features
- ABB System pro E Power low-voltage switchboard accessory.
- PLVS2572 manufacturer type designation.
- 1STQ008898A0000 ABB manufacturer order code.
- Vertical lateral segregation for compatible switchboard compartments.
- 250 mm nominal compartment height.
- 700 mm nominal switchboard depth.
- 245 mm actual component height.
- 490.7 mm actual component width.
- Approximately 1.4 kg net component weight.
- Manufactured from pickled steel sheet.
- Designed for structures incorporating an intermediate rear upright.
- Suitable for installation between the intermediate rear upright and the rear structural upright in compatible arrangements.
- Supports internal compartment segregation using complementary ABB partition accessories.
- Mechanical enclosure accessory for professional electrical panel manufacturing.
- Supplied as an individual segregation component.
Reliable Vertical Side Segregation for Low-Voltage Distribution Switchboards
Internal segregation is an important consideration in the design and construction of low-voltage electrical switchboards. Mechanical partition components establish physical boundaries between designated functional areas, supporting structured compartment layouts and helping electrical panel builders implement the required separation arrangements within industrial and commercial power distribution assemblies.
The ABB PLVS2572 vertical side segregation is designed for compatible System pro E Power structures incorporating an intermediate rear upright and a rear structural upright. The component provides a dedicated lateral separation panel for its specified compartment arrangement, helping maintain organised internal divisions within the completed switchboard.
The PLVS2572 is designated for a 250 mm nominal compartment height and 700 mm nominal switchboard depth. Its actual component height of 245 mm and width of 490.7 mm describe the individual segregation accessory. The distinction between nominal installation dimensions and physical component dimensions is important when selecting accessories for new switchboard assemblies or replacing existing components.
Within the ABB System pro E Power platform, the PLVS2572 can be combined with compatible rear vertical segregation panels, horizontal partitions and other internal separation accessories. The product is suitable for a range of supported internal segregation arrangements, including Form 3b, provided that the complete switchboard design and complementary components meet the applicable requirements. An individual segregation panel does not independently establish the segregation classification of an entire switchboard.
Manufactured from pickled steel sheet, the PLVS2572 provides a robust mechanical solution for professional electrical enclosure construction. It is an internal switchboard accessory, not a complete main distribution board, circuit breaker or standalone electrical protection device. Installation and compatibility should be verified against the relevant ABB System pro E Power technical documentation.
Typical Applications
- ABB System pro E Power low-voltage distribution switchboards.
- Industrial main electrical distribution assemblies.
- Commercial building main distribution panels.
- Vertical side segregation of internal switchboard compartments.
- Switchboard structures incorporating intermediate rear uprights.
- Compatible horizontal circuit-breaker compartment arrangements.
- Form 3b internal segregation assemblies using the necessary complementary components.
- Other supported Form 2, Form 3 and Form 4 internal separation configurations.
- Modular electrical enclosure construction and assembly.
- OEM electrical panel manufacturing and switchboard integration.
- Replacement of corresponding vertical side segregation components.
- Industrial electrical infrastructure and engineered power distribution projects.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ008898A0000 |
| Product designation | SEGR.VERT.LAT. H=250MM D=700MM INT.UP. |
| Product type | Vertical side segregation accessory |
| Product category | Low-voltage switchboard segregation accessories |
| Accessory classification | Internal divider panel / enclosure accessory |
| Nominal compartment height | 250 mm |
| Nominal switchboard depth | 700 mm |
| Product net height | 245 mm |
| Product net width | 490.7 mm |
| Product net weight | Approximately 1.4 kg |
| Material | Pickled steel sheet |
| Installation position | Vertical lateral compartment segregation |
| Installation configuration | Intermediate rear upright and rear structural upright |
| Construction type | Mechanical mounting accessory |
| Segregation application | Compatible Form 2a, 2b, 3a, 3b, 4a and 4b internal separation arrangements |
| Functional purpose | Mechanical separation of designated switchboard compartment areas |
| Compatible system | ABB System pro E Power |
| Application | Low-voltage main distribution switchboards |
| Regulatory information | RoHS compliance indicated in supplier documentation |
| EAN | 8015646796776 |
| Country of origin | Italy |
| Package quantity | 1 piece |
Frequently Asked Questions
What is the ABB PLVS2572 used for?
The ABB PLVS2572 is a vertical side segregation component designed for compatible ABB System pro E Power low-voltage switchboards. It provides mechanical separation within internal switchboard compartments incorporating an intermediate rear upright and a rear structural upright.
What are the dimensions of the ABB PLVS2572?
The PLVS2572 is specified for a nominal 250 mm compartment height and 700 mm switchboard depth. Its actual component height is 245 mm, and its width is 490.7 mm. The reported net weight is approximately 1.4 kg.
What is the ABB order code for the PLVS2572?
The ABB manufacturer order code is 1STQ008898A0000, corresponding to the PLVS2572 vertical side segregation accessory in the System pro E Power range.
What does INT.UP. mean in the ABB PLVS2572 designation?
INT.UP. indicates an intermediate upright. The PLVS2572 is designed for compatible switchboard structures incorporating an intermediate rear upright, with the lateral segregation positioned between the intermediate upright and the rear structural upright.
Does the ABB PLVS2572 support Form 3b segregation?
Yes. The PLVS2572 is suitable for compatible ABB System pro E Power Form 3b internal segregation arrangements. The required segregation form depends on the complete switchboard design and correct installation of all necessary complementary components.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power provides a coordinated range of modular switchboard structures, mounting accessories and segregation components for professional low-voltage power distribution. The ABB PLVS2572 vertical side segregation, order code 1STQ008898A0000, offers a dedicated 250 mm high, 700 mm deep intermediate-upright solution for compatible switchboard compartments, supporting organised internal separation and consistent electrical panel construction.
