Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008885A0000 ABB PLVS1752 Vertical Side Segregation 175 mm x 500 mm System pro E Power
ABB PLVS1752 (1STQ008885A0000) is a pickled steel vertical side segregation accessory for 175 mm high compartments in 500 mm deep System pro E Power switchboards, designed for compatible circuit-breaker installations with intermediate rear uprights.
£33.17
Why Choose the ABB PLVS1752 System pro E Power Vertical Side Segregation?
The ABB PLVS1752, manufacturer order code 1STQ008885A0000, is a dedicated vertical side segregation accessory for ABB System pro E Power low-voltage distribution switchboards. Specified for a nominal 175 mm height and 500 mm switchboard depth, this component provides mechanical separation within compatible circuit-breaker compartments incorporating an intermediate rear upright.
As part of the ABB System pro E Power range, the PLVS1752 is designed for lateral segregation between the intermediate rear upright and the structural rear upright. It is suitable for specified vertical installations involving ABB Tmax T5, T6 and T7 circuit breakers and SACE Emax 2 E1.2 circuit breakers, including applicable fixed and mechanically interlocked configurations.
Manufactured from pickled steel sheet, the PLVS1752 offers durable construction for professional electrical panel assembly. Its actual dimensions of 170 mm height, 290.7 mm width and 22 mm depth distinguish the physical component from its nominal 175 mm × 500 mm installation designation. It is a practical solution for switchboard manufacturers requiring correctly matched internal segregation accessories.
Key Advantages
- Purpose-designed vertical side segregation accessory for ABB System pro E Power switchboards.
- 175 mm nominal height for compatible circuit-breaker compartments.
- Designed for switchboard structures with a nominal 500 mm depth.
- Suitable for arrangements incorporating an intermediate rear upright.
- Provides mechanical separation between designated internal switchboard areas.
- Manufactured from durable pickled steel sheet.
- Supports compatible Form 3b internal segregation arrangements when installed with the necessary complementary components.
- Suitable for specified ABB Tmax T5, T6, T7 and SACE Emax 2 E1.2 circuit-breaker configurations.
- Compact construction supports organised internal compartment layouts.
- Part of ABB's coordinated modular low-voltage power distribution system.
Key Features
- ABB System pro E Power low-voltage switchboard accessory.
- PLVS1752 manufacturer type designation.
- 1STQ008885A0000 ABB manufacturer order code.
- Vertical lateral segregation for compatible circuit-breaker compartments.
- 175 mm nominal compartment height.
- 500 mm nominal switchboard depth.
- 170 mm actual component height.
- 290.7 mm actual component width.
- 22 mm actual component depth.
- 0.580 kg net component weight.
- Pickled steel sheet construction.
- Designed for installation between the intermediate rear upright and structural rear upright.
- Applicable to compatible fixed and mechanically interlocked circuit-breaker arrangements.
- Supports engineered internal segregation using complementary ABB components.
- Supplied as an individual switchboard segregation accessory.
Reliable Vertical Side Segregation for Low-Voltage Distribution Switchboards
Internal segregation plays an important role in the construction of low-voltage electrical switchboards. Mechanical divider panels establish physical boundaries between designated functional areas, supporting structured compartment layouts and helping electrical panel builders implement the separation arrangements specified for an electrical distribution assembly.
The ABB PLVS1752 vertical side segregation is designed for compatible System pro E Power circuit-breaker compartments incorporating both an intermediate rear upright and a structural rear upright. Installed between these structural elements, the component provides a dedicated lateral separation panel for the specified compartment arrangement.
The PLVS1752 is designated for a 175 mm nominal compartment height and 500 mm nominal switchboard depth. Its actual component dimensions are 170 × 290.7 × 22 mm (height × width × depth). The distinction between nominal installation dimensions and physical component dimensions is important when selecting segregation accessories for new assemblies or replacing components in existing switchboards.
Within ABB System pro E Power, the PLVS1752 can be combined with compatible rear vertical segregation panels, horizontal shelves and other internal partition components. These accessories support engineered segregation arrangements, including applicable Form 3b configurations. The final segregation form depends on the complete switchboard design, circuit-breaker installation and correct selection of all required components.
Manufactured from pickled steel sheet, the PLVS1752 is intended for professional electrical enclosure construction. It is a mechanical switchboard accessory, not a standalone main distribution board, circuit breaker or electrical protection device. Installation and compatibility should be verified against the relevant ABB System pro E Power technical documentation.
Typical Applications
- ABB System pro E Power low-voltage distribution switchboards.
- Industrial main electrical distribution assemblies.
- Commercial building main distribution panels.
- Vertical side segregation of circuit-breaker compartments.
- Switchboard structures with intermediate rear uprights.
- Compatible ABB Tmax T5, T6 and T7 circuit-breaker installations.
- Applicable ABB SACE Emax 2 E1.2 circuit-breaker compartments.
- Form 3b internal segregation arrangements using the required complementary accessories.
- Modular electrical enclosure construction and assembly.
- OEM electrical panel manufacturing and switchboard integration.
- Replacement of corresponding vertical side segregation components.
- Industrial electrical infrastructure and engineered power distribution projects.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ008885A0000 |
| Product designation | SEGR.VERT.LAT. H=175MM D=500MM INT.UP. |
| Product type | Vertical side segregation accessory |
| Product category | Low-voltage switchboard segregation accessories |
| Accessory classification | Internal divider panel / enclosure accessory |
| Nominal compartment height | 175 mm |
| Nominal switchboard depth | 500 mm |
| Product net height | 170 mm |
| Product net width | 290.7 mm |
| Product net depth | 22 mm |
| Product net weight | 0.580 kg |
| Material | Pickled steel sheet |
| Installation position | Rear vertical, lateral compartment segregation |
| Installation configuration | Intermediate rear upright and structural rear upright |
| Compatible circuit-breaker families | ABB Tmax T5, T6, T7 and SACE Emax 2 E1.2 in applicable configurations |
| Segregation application | Compatible Form 3b arrangements and other supported segregation configurations |
| Functional purpose | Mechanical separation of internal circuit-breaker compartment areas |
| Compatible system | ABB System pro E Power |
| Application | Low-voltage main distribution switchboards |
| RoHS compliance | EU Directive 2011/65/EU and amendment (EU) 2015/863 |
| EAN | 8015646796646 |
| Country of origin | Italy |
| Package quantity | 1 piece |
Frequently Asked Questions
What is the ABB PLVS1752 used for?
The ABB PLVS1752 is a vertical side segregation component designed for compatible ABB System pro E Power low-voltage switchboards. It provides mechanical separation within circuit-breaker compartments incorporating an intermediate rear upright and a structural rear upright.
What are the dimensions of the ABB PLVS1752?
The PLVS1752 is specified for a nominal 175 mm compartment height and 500 mm switchboard depth. Its actual component dimensions are 170 × 290.7 × 22 mm (height × width × depth), with a net weight of 0.580 kg.
What is the ABB order code for the PLVS1752?
The official ABB manufacturer order code is 1STQ008885A0000, corresponding to the PLVS1752 vertical side segregation accessory in the System pro E Power range.
What does INT.UP. mean in the ABB PLVS1752 designation?
INT.UP. indicates an intermediate upright. The PLVS1752 is designed for switchboard configurations incorporating an intermediate rear upright, with the side segregation installed between that upright and the structural rear upright.
Does the ABB PLVS1752 support Form 3b segregation?
Yes. The PLVS1752 can be used in compatible ABB System pro E Power Form 3b segregation arrangements. Achieving the required segregation form depends on the complete switchboard configuration and correct installation of the necessary complementary components.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power provides a coordinated range of modular switchboard structures, mounting accessories and segregation components for professional low-voltage power distribution. The ABB PLVS1752 vertical side segregation, order code 1STQ008885A0000, offers a dedicated 175 mm high, 500 mm deep intermediate-upright solution for compatible circuit-breaker compartments, supporting organised internal separation and consistent electrical panel construction.
