Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008876A0000 ABB PRVS2210 Rear Vertical Segregation 225 x 1000 mm Without Internal Upright System Pro E Power
ABB PRVS2210 is a rear vertical segregation component with a nominal height of 225 mm, width of 1000 mm and configuration without an internal upright for compatible System Pro E Power low-voltage switchgear assemblies.
£84.49
Why Choose the ABB PRVS2210 Rear Vertical Segregation Component?
The ABB PRVS2210 is a dedicated rear vertical segregation component without an internal upright for compatible ABB System Pro E Power low-voltage switchgear assemblies. Featuring a nominal height of 225 mm and width of 1000 mm, this accessory supports the physical separation and organisation of designated internal areas within modular electrical distribution cabinets.
As part of the ABB System Pro E Power enclosure accessory range, the PRVS2210 provides a coordinated solution for rear vertical segregation arrangements specified without an internal upright. It is intended for professional electrical panel builders, switchboard manufacturers and installation engineers requiring system-specific separation components for industrial and commercial low-voltage distribution systems.
Identified by ABB order code 1STQ008876A0000, the PRVS2210 is specified for a 225 mm high by 1000 mm wide rear vertical segregation arrangement. Its manufacturer designation, SEGR.VER.REAR H=225MM W=1000MM NO I.UP., identifies the rear installation position, vertical segregation orientation and configuration without an internal upright, supporting accurate accessory selection for compatible System Pro E Power switchgear assemblies.
Key Advantages
- Purpose-designed rear vertical segregation accessory for ABB System Pro E Power switchgear.
- 225 mm nominal height for the specified internal separation arrangement.
- 1000 mm nominal width for compatible switchgear cabinet configurations.
- Without internal upright configuration, as identified by the manufacturer designation.
- Supports physical separation between designated internal switchgear areas.
- Rear vertical arrangement helps establish organised compartment boundaries.
- Designed for integration with compatible ABB System Pro E Power enclosure components.
- Supports coordinated modular switchboard construction and internal layout planning.
- Provides a dedicated ABB order code for accurate procurement, maintenance and replacement.
Key Features
- ABB System Pro E Power internal segregation accessory.
- Product designation: PRVS2210.
- ABB order code: 1STQ008876A0000.
- Product type: Rear vertical segregation component.
- Nominal height: 225 mm.
- Nominal width: 1000 mm.
- Segregation orientation: Vertical.
- Segregation position: Rear.
- Configuration: Without internal upright (NO I.UP.).
- Intended for compatible modular low-voltage switchgear enclosure arrangements.
- Supports the organisation and physical separation of designated internal compartments.
- Part of ABB's coordinated System Pro E Power range of enclosure and segregation accessories.
Reliable Rear Vertical Segregation for Modular Switchgear Assemblies
Internal segregation is an important consideration when designing and constructing low-voltage switchgear assemblies. Correctly selected separation components help establish physical boundaries between designated areas of a switchboard, supporting organised layouts and the intended arrangement of electrical equipment, busbars and functional units.
The ABB PRVS2210 rear vertical segregation component is intended for System Pro E Power configurations requiring a 225 mm high and 1000 mm wide rear separation arrangement without an internal upright. Its defined orientation, installation position and manufacturer designation help panel builders identify the appropriate accessory for the specified switchgear layout. The configuration without an internal upright is an important consideration when matching this component to the intended cabinet structure.
ABB System Pro E Power provides a modular platform for constructing low-voltage distribution switchboards using coordinated cabinet structures, mounting systems and internal segregation components. When correctly selected and installed, the PRVS2210 contributes to the intended compartment arrangement. The achieved form of internal separation, electrical ratings, ingress protection and compliance with applicable IEC 61439 requirements depend on the complete assembly design and verification rather than this individual accessory alone.
Typical Applications
- ABB System Pro E Power low-voltage switchgear assemblies.
- Rear vertical segregation within compatible modular electrical cabinets.
- Industrial main power distribution switchboards.
- Commercial building electrical distribution installations.
- Internal compartment separation in low-voltage switchgear.
- Cabinet configurations requiring 225 mm high and 1000 mm wide rear segregation.
- System Pro E Power arrangements specified without an internal upright.
- Professional electrical panel building and switchgear manufacturing.
- Replacement or extension of matching ABB System Pro E Power segregation arrangements.
Technical Specifications
| Product range | System Pro E Power |
|---|---|
| ABB order code | 1STQ008876A0000 |
| Manufacturer designation | SEGR.VER.REAR H=225MM W=1000MM NO I.UP. |
| Product type | Rear vertical segregation component |
| Nominal height | 225 mm |
| Nominal width | 1000 mm |
| Installation orientation | Vertical |
| Segregation location | Rear |
| Internal upright configuration | Without internal upright |
| Compatible system | ABB System Pro E Power |
| Application | Internal low-voltage switchgear segregation |
| Equipment category | Switchgear enclosure segregation accessory |
Frequently Asked Questions
What is the ABB PRVS2210 used for?
The ABB PRVS2210 is a rear vertical segregation component designed for compatible ABB System Pro E Power low-voltage switchgear assemblies. It supports physical separation between designated internal areas of a modular electrical distribution cabinet and is specified for a configuration without an internal upright.
What are the dimensions of the ABB PRVS2210?
The PRVS2210 is specified for a 225 mm nominal height and 1000 mm nominal width. Its depth, remaining physical dimensions and mounting details should be confirmed against the applicable ABB technical documentation.
What does NO I.UP. mean in the ABB PRVS2210 designation?
The abbreviation NO I.UP. indicates a configuration without an internal upright. This distinguishes the PRVS2210 from segregation accessories intended for arrangements incorporating an internal upright. The exact installation and associated structural requirements should be confirmed using ABB System Pro E Power technical documentation.
Which ABB switchgear range is compatible with the PRVS2210?
The PRVS2210 belongs to the ABB System Pro E Power modular low-voltage switchgear range. Compatibility with the selected enclosure dimensions, arrangement without an internal upright, compartment layout and associated mounting components should be confirmed before installation.
Does the ABB PRVS2210 independently provide a specific form of internal separation?
No. The PRVS2210 is an individual segregation accessory and does not independently establish a particular form of separation. The completed switchgear assembly must incorporate the appropriate barriers, functional units and other components, with the final arrangement verified against the applicable design requirements.
Supporting Professional Switchboard Construction
ABB System Pro E Power segregation accessories provide electrical engineers and panel builders with coordinated components for constructing organised low-voltage distribution assemblies. The PRVS2210 offers a dedicated rear vertical segregation solution for compatible 225 mm high and 1000 mm wide arrangements without an internal upright, supporting consistent component selection and professional switchboard assembly.
