Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PRVS2580 is a System pro E Power vertical rear segregation component designed for 250 mm high and 800 mm wide low-voltage switchboard configurations without an intermediate upright.
£76.59
The ABB PRVS2580 is a dedicated vertical rear segregation component for ABB System pro E Power low-voltage electrical distribution switchboards. Designed for a nominal 250 mm height and 800 mm width, this accessory supports internal compartment separation within compatible modular switchboard assemblies.
The PRVS2580 is specifically designated for switchboard configurations without an intermediate upright. This structural distinction is important when selecting segregation accessories, ensuring that the component corresponds to the intended internal arrangement of the ABB System pro E Power assembly.
Suitable for professional electrical panel building and switchgear construction, the PRVS2580 supports organised rear compartment layouts in compatible industrial and commercial power distribution systems. Its manufacturer-specific design provides a practical solution for 250 mm high × 800 mm wide vertical rear segregation applications.
Internal segregation supports the organisation of low-voltage electrical switchboards by establishing defined boundaries between designated areas of an assembly. The ABB PRVS2580 provides a dedicated vertical rear segregation component for compatible System pro E Power configurations requiring a 250 mm high and 800 mm wide arrangement.
The no intermediate upright designation distinguishes the PRVS2580 from components intended for switchboard structures incorporating intermediate uprights. Selecting the appropriate segregation accessory requires consideration of both the specified dimensions and the internal structural configuration. The PRVS2580 can be incorporated alongside other compatible System pro E Power components to support an organised rear compartment arrangement.
The PRVS2580 is a mechanical segregation accessory and does not independently provide overcurrent protection, short-circuit protection or a certified form of internal separation. Its contribution to the completed switchboard depends on the overall assembly design, associated barriers and correct installation in accordance with ABB instructions. Applicable requirements, including IEC/EN 61439 where relevant, must be assessed for the complete assembly.
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ008867A0000 |
| Product type | Vertical rear segregation component |
| Product category | Switchboard Segregation Accessories |
| Nominal height | 250 mm |
| Nominal width | 800 mm |
| Segregation orientation | Vertical |
| Segregation position | Rear |
| Structural configuration | Without intermediate upright |
| Compatible system | ABB System pro E Power |
| Primary function | Internal switchboard compartment segregation |
| Application | Low-voltage electrical distribution assemblies |
The ABB PRVS2580 is a vertical rear segregation component designed to support internal compartment separation within compatible ABB System pro E Power low-voltage switchboards.
The PRVS2580 is specified for a nominal 250 mm height and 800 mm width.
No. The PRVS2580 is specifically designated for switchboard configurations without an intermediate upright. The complete structural arrangement should be checked against ABB assembly documentation.
The PRVS2580 belongs to the ABB System pro E Power range and is intended for compatible modular low-voltage electrical distribution assemblies.
The PRVS2580 is intended for vertical rear segregation within compatible switchboard structures. Its exact mounting position and fixing arrangement should follow the relevant ABB installation instructions.
Both components are specified for 800 mm wide vertical rear segregation arrangements without an intermediate upright. The PRVS2580 has a nominal height of 250 mm, whereas the PRVS2080 has a nominal height of 200 mm.
No. The PRVS2580 is a mechanical segregation component, not an electrical protective device. Circuit protection must be provided by appropriately selected equipment within the completed switchboard.
Not independently. The PRVS2580 supports internal segregation, but the achieved form of separation depends on the complete switchboard arrangement, associated barriers and assembly design.
The ABB manufacturer order code is 1STQ008867A0000, identifying the PRVS2580 vertical rear segregation component for a 250 mm high × 800 mm wide configuration without an intermediate upright.
ABB System pro E Power accessories support professional modular switchboard construction and organised low-voltage electrical distribution assemblies. The ABB PRVS2580 vertical rear segregation component provides electrical panel builders, switchgear manufacturers and installation engineers with a dedicated solution for compatible rear compartment arrangements without intermediate uprights.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.