Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PRVS1780 is a System pro E Power vertical rear segregation component designed for 175 mm high and 800 mm wide low-voltage switchboard configurations without an intermediate upright.
£67.65
The ABB PRVS1780 is a dedicated vertical rear segregation component designed for compatible ABB System pro E Power low-voltage electrical distribution switchboards. Specified for a nominal 175 mm height and 800 mm width, this accessory supports organised internal compartmentalisation in switchboard configurations without an intermediate upright.
As part of the ABB System pro E Power range, the PRVS1780 provides a manufacturer-specific solution for rear vertical separation within modular electrical distribution assemblies. Its configuration is intended for applications where the designated switchboard structure does not incorporate an intermediate upright, helping panel builders select segregation components suited to the required internal arrangement.
The PRVS1780 is suitable for consideration in industrial power distribution switchboards, commercial electrical installations and professional low-voltage switchgear assemblies. Its 175 mm high × 800 mm wide configuration makes it a dedicated option for compatible rear segregation arrangements where intermediate upright support is not specified.
Internal segregation helps establish defined boundaries between designated sections of low-voltage electrical switchboards. The ABB PRVS1780 is intended for rear vertical segregation in compatible System pro E Power assemblies, with a specified 175 mm height and 800 mm width. These dimensions provide an important reference when selecting the appropriate component for a planned switchboard configuration.
The no intermediate upright designation is a defining characteristic of the PRVS1780. It distinguishes this component from segregation accessories intended for structures incorporating intermediate uprights. Correct selection should therefore consider both the required dimensions and the internal structural arrangement of the switchboard.
The PRVS1780 is a mechanical segregation accessory and does not independently provide overcurrent protection, short-circuit protection or a certified form of internal separation. Its effectiveness depends on the complete assembly design, associated partitions and correct installation in accordance with ABB documentation. Applicable assembly requirements, including IEC/EN 61439 where relevant, must be considered for the completed switchboard.
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ008864A0000 |
| Product type | Vertical rear segregation component |
| Product category | Switchboard Segregation Accessories |
| Nominal height | 175 mm |
| Nominal width | 800 mm |
| Segregation orientation | Vertical |
| Segregation position | Rear |
| Structural configuration | No intermediate upright |
| Compatible system | ABB System pro E Power |
| Primary function | Internal switchboard compartment segregation |
| Application | Low-voltage electrical distribution assemblies |
The ABB PRVS1780 is a vertical rear segregation component designed to support internal compartment separation within compatible ABB System pro E Power low-voltage switchboards.
The PRVS1780 is specified for a nominal 175 mm height and 800 mm width.
The PRVS1780 is specifically designated for a no intermediate upright configuration. The complete structural arrangement and installation requirements should be checked against ABB assembly documentation.
The PRVS1780 belongs to the ABB System pro E Power range and is intended for compatible modular low-voltage electrical distribution assemblies.
The PRVS1780 is intended for vertical rear segregation within compatible switchboard structures. Its exact mounting position and fixing arrangement should follow the relevant ABB instructions.
The PRVS1780 is specified for configurations without an intermediate upright. Components designated for intermediate upright arrangements are intended for a different structural configuration and should not be treated as interchangeable without confirming compatibility.
No. The PRVS1780 is a mechanical segregation component, not an electrical protective device. Circuit protection must be provided by appropriately selected equipment within the completed switchboard.
Not independently. The PRVS1780 supports internal segregation, but the achieved form of separation depends on the complete switchboard arrangement, associated barriers and assembly design.
The ABB manufacturer order code is 1STQ008864A0000, identifying the PRVS1780 vertical rear segregation component for a 175 mm high × 800 mm wide configuration without an intermediate upright.
ABB System pro E Power accessories support professional modular switchboard construction and organised low-voltage electrical distribution assemblies. The ABB PRVS1780 vertical rear segregation component provides electrical panel builders and switchgear engineers with a dedicated manufacturer-specific solution for compatible internal segregation arrangements without intermediate uprights.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.