Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PRVS2260 (1STQ008856A0000) is a vertical rear segregation accessory for compatible ABB System pro E power low-voltage switchboards, specified for a nominal height of 225 mm, width of 600 mm and NO I.UP. configuration.
£63.90
The ABB PRVS2260 (1STQ008856A0000) is a dedicated vertical rear segregation accessory within the ABB System pro E power modular low-voltage switchboard range. Identified by the manufacturer as SEGR.VERT.REAR H=225MM W=600MM NO I.UP., this component is intended for compatible switchboard assemblies requiring vertical segregation at the rear of the enclosure, with the specific NO I.UP. configuration designation.
Designed for professional switchboard manufacturers, electrical panel builders and industrial power distribution projects, the ABB PRVS2260 supports structured internal compartment arrangements. Its vertical rear configuration provides a manufacturer-specific component for establishing physical separation between designated internal switchboard areas, helping panel builders select appropriate segregation accessories for compatible System pro E power assemblies.
Specified for a 225 mm nominal height and 600 mm nominal width configuration, the PRVS2260 carries ABB's NO I.UP. arrangement designation. This distinguishes it from accessories identified with INT.UP. and makes configuration matching important during product selection. The PRVS2260 is suitable for new switchboard construction, compatible refurbishment projects and replacement applications where the corresponding manufacturer specification is required.
Internal segregation is an important consideration in the mechanical design of low-voltage electrical distribution assemblies. Dedicated segregation accessories help switchboard manufacturers establish defined physical boundaries between designated internal areas, supporting structured compartment layouts and consistent modular construction. The appropriate segregation arrangement depends on the complete switchboard design, the position of installed equipment and the requirements of the intended electrical distribution application.
The ABB PRVS2260 is specifically designated for vertical rear segregation, with a nominal height of 225 mm and width of 600 mm. Its NO I.UP. marking distinguishes it from variants carrying an INT.UP. designation. The precise mechanical meaning of this abbreviation, including any associated mounting or configuration requirements, should be confirmed using ABB's applicable technical documentation. The stated dimensions identify the nominal application configuration rather than a complete set of independently verified physical component measurements.
The PRVS2260 is an individual segregation accessory rather than a complete switchboard separation system. Its installation does not independently establish a particular form of internal separation, ingress protection rating, electrical insulation performance, rated current or short-circuit withstand capability. These characteristics depend on the complete switchboard assembly, associated components and verified construction. Installation should follow ABB's applicable instructions, with the finished low-voltage switchboard designed and verified against relevant requirements, including the IEC/EN 61439 series where applicable.
| Product group | System pro E power |
|---|---|
| ABB order code | 1STQ008856A0000 |
| Product type | Vertical rear segregation accessory |
| Manufacturer description | SEGR.VERT.REAR H=225MM W=600MM NO I.UP. |
| Segregation orientation | Vertical |
| Segregation position | Rear |
| Nominal height configuration | 225 mm |
| Nominal width configuration | 600 mm |
| Manufacturer arrangement designation | NO I.UP. |
| Primary function | Physical segregation of designated internal switchboard areas |
| Application | Modular low-voltage electrical distribution assemblies |
| System compatibility | ABB System pro E power, subject to the matching H225/W600 and NO I.UP. configuration |
| Installation requirements | As specified in the applicable ABB assembly documentation |
The ABB PRVS2260 is a vertical rear segregation accessory for compatible ABB System pro E power low-voltage switchboards. It is intended to provide physical separation between designated internal areas within the specified switchboard arrangement.
The manufacturer specifies a 225 mm nominal height and 600 mm nominal width configuration. These are application designations and do not independently establish the accessory's complete physical dimensions.
NO I.UP. is the manufacturer's configuration designation for this PRVS2260 variant. It distinguishes the accessory from variants marked INT.UP., but its precise mechanical meaning and installation requirements should be checked in the applicable ABB technical documentation.
No. Compatibility depends on the particular switchboard configuration, including the 225 mm height, 600 mm width and NO I.UP. arrangement. The intended installation should be checked against ABB's approved assembly instructions.
The PRVS2260 alone does not establish a certified form of internal separation. The achieved separation arrangement and applicable performance characteristics depend on the complete switchboard design, associated components and verification of the finished assembly.
ABB System pro E power provides a modular platform for professional low-voltage electrical distribution assemblies. The PRVS2260 offers a manufacturer-designated vertical rear segregation accessory for compatible 225 mm height and 600 mm width arrangements identified as NO I.UP., supporting accurate component selection and structured switchboard construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.