Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008855A0000 ABB PRVS2060 Vertical Rear Segregation H200 W600 NO I.UP. System pro E Power
ABB PRVS2060 (1STQ008855A0000) is a vertical rear segregation accessory for compatible ABB System pro E power low-voltage switchboards, specified for a nominal height of 200 mm, width of 600 mm and NO I.UP. configuration.
£62.46
Why Choose the ABB PRVS2060 Vertical Rear Segregation Accessory?
The ABB PRVS2060 (1STQ008855A0000) is a dedicated vertical rear segregation accessory within the ABB System pro E power modular low-voltage switchboard range. Identified by the manufacturer as SEGR.VERT.REAR H=200MM W=600MM NO I.UP., this component is intended for compatible switchboard assemblies requiring vertical segregation at the rear of the enclosure, with the specific NO I.UP. configuration designation.
Developed for professional switchboard construction and electrical distribution projects, the ABB PRVS2060 supports the creation of defined physical boundaries between designated internal switchboard areas. Its vertical rear arrangement makes it relevant to panel builders and electrical contractors selecting manufacturer-specific segregation components for organised ABB System pro E power assemblies.
The PRVS2060 is specified for a 200 mm nominal height and 600 mm nominal width configuration. Unlike variants identified with INT.UP., this model carries the manufacturer's NO I.UP. designation, which must be considered when matching the accessory to an approved switchboard arrangement. It is suitable for new switchboard construction, compatible refurbishment projects and replacement applications where the same product specification is required.
Key Advantages
- Dedicated vertical rear segregation accessory for compatible low-voltage switchboard assemblies.
- Part of the established ABB System pro E power modular distribution range.
- Specified for a 200 mm nominal height arrangement.
- Designed for a 600 mm nominal width configuration.
- Clearly identified by the manufacturer's NO I.UP. configuration designation.
- Supports structured physical separation between designated internal switchboard areas.
- Enables accurate manufacturer-specific component selection during panel design and procurement.
- Suitable for compatible switchboard assembly, refurbishment and segregation accessory replacement.
Key Features
- ABB System pro E power product family.
- PRVS2060 manufacturer model designation.
- 1STQ008855A0000 ABB order code.
- Vertical segregation orientation.
- Rear segregation position.
- 200 mm nominal height designation.
- 600 mm nominal width designation.
- NO I.UP. manufacturer arrangement designation.
- Intended for compatible modular low-voltage switchboard internal layouts.
Vertical Rear Segregation and Configuration Selection in ABB Switchboards
Low-voltage switchboards may use internal segregation components to establish physical boundaries between different functional areas of an electrical distribution assembly. The required arrangement depends on the overall switchboard design, the location of electrical equipment and the separation objectives specified for the installation. Manufacturer-specific accessories help panel builders select components appropriate to the intended modular configuration.
The ABB PRVS2060 is specifically designated for vertical rear segregation, with a nominal height of 200 mm and width of 600 mm. Its NO I.UP. marking distinguishes it from products carrying an INT.UP. designation. Although this wording indicates a different manufacturer-defined arrangement, the exact mechanical implications of NO I.UP. should be confirmed from ABB documentation rather than inferred from the abbreviation alone. The stated dimensions identify the nominal application configuration and should not be treated as independently verified overall component measurements.
The PRVS2060 is an individual segregation accessory and does not, by itself, establish a particular form of internal separation, ingress protection rating, insulation performance, electrical rating or short-circuit withstand capability. These characteristics depend on the complete switchboard assembly and its verified construction. Installation should follow ABB's applicable technical instructions, and the completed low-voltage switchboard should be designed and verified against relevant requirements, including the IEC/EN 61439 series where applicable.
Typical Applications
- ABB System pro E power low-voltage electrical distribution switchboards.
- Vertical rear segregation within compatible modular switchboard assemblies.
- Internal segregation arrangements requiring a nominal 200 mm height and 600 mm width configuration.
- Switchboard layouts specified for ABB's NO I.UP. arrangement.
- Industrial electrical distribution panel construction.
- Commercial building main and sub-distribution assemblies.
- OEM switchboard manufacturing and electrical panel-building projects.
- Compatible switchboard refurbishment, maintenance and segregation component replacement.
Technical Specifications
| Product group | System pro E power |
|---|---|
| ABB order code | 1STQ008855A0000 |
| Product type | Vertical rear segregation accessory |
| Manufacturer description | SEGR.VERT.REAR H=200MM W=600MM NO I.UP. |
| Segregation orientation | Vertical |
| Segregation location | Rear |
| Nominal height configuration | 200 mm |
| Nominal width configuration | 600 mm |
| Arrangement designation | NO I.UP. |
| Primary function | Physical segregation of designated internal switchboard areas |
| Application | Modular low-voltage electrical distribution assemblies |
| System compatibility | ABB System pro E power, subject to the matching H200/W600 and NO I.UP. arrangement |
| Installation requirements | As specified in the applicable ABB assembly documentation |
Frequently Asked Questions
What is the ABB PRVS2060 1STQ008855A0000 used for?
The ABB PRVS2060 is a vertical rear segregation accessory for compatible ABB System pro E power low-voltage switchboards. It is intended to provide physical separation between designated internal areas within the specified switchboard arrangement.
What dimensions are specified for the ABB PRVS2060?
The manufacturer specifies a 200 mm nominal height and 600 mm nominal width configuration. These are application designations and do not independently establish the accessory's complete physical dimensions.
What does NO I.UP. mean in the ABB PRVS2060 description?
NO I.UP. is the manufacturer's configuration designation for this PRVS2060 variant. It distinguishes the accessory from variants marked INT.UP., but its precise mechanical meaning and installation requirements should be checked in the applicable ABB technical documentation.
Is the ABB PRVS2060 compatible with every System pro E power switchboard?
No. Compatibility depends on the particular switchboard configuration, including the 200 mm height, 600 mm width and NO I.UP. arrangement. The intended installation should be checked against ABB's approved assembly instructions.
Does the ABB PRVS2060 provide a certified form of internal separation?
The PRVS2060 alone does not establish a certified form of internal separation. The achieved separation arrangement and applicable performance characteristics depend on the complete switchboard design, associated components and verification of the finished assembly.
ABB System pro E Power for Professional Switchboard Construction
ABB System pro E power provides a modular platform for professional low-voltage electrical distribution assemblies. The PRVS2060 offers a manufacturer-designated vertical rear segregation accessory for compatible 200 mm height and 600 mm width arrangements identified as NO I.UP., supporting accurate component selection and structured switchboard construction.
