1STQ008825A0000 ABB PRVS2082 Rear Vertical Output-Side Segregation 200 mm x 800 mm System pro E Power

Why Choose the ABB PRVS2082 System pro E Power Rear Vertical Segregation?

The ABB PRVS2082, manufacturer order code 1STQ008825A0000, is a specialist rear vertical output-side segregation component designed for ABB System pro E Power low-voltage main distribution switchboards. Specified for a nominal 200 mm compartment height and 800 mm switchboard width, this purpose-designed accessory provides mechanical separation within compatible circuit-breaker compartments and electrical distribution assemblies.

As part of the ABB System pro E Power range, the PRVS2082 is designed for vertical circuit-breaker arrangements incorporating an intermediate rear upright. Manufactured from pickled steel sheet, it provides a durable mechanical separation element on the outgoing connection side of compatible switchboard compartments. The component is intended for use with suitable ABB Tmax T5, T6 and T7 circuit breakers and SACE Emax 2 E1.2 configurations, including applicable fixed and mechanically interlocked arrangements.

With nominal installation dimensions of 200 mm high and 800 mm wide, the ABB PRVS2082 supports structured internal compartmentalisation in industrial and commercial low-voltage distribution systems. Its compact component dimensions of 195 × 365.7 × 22 mm and dedicated intermediate-upright configuration make it a practical choice for professional electrical panel builders requiring compatible Form 3b internal segregation accessories.

Key Advantages

• Purpose-designed rear vertical output-side segregation for ABB System pro E Power switchboards.
• 200 mm nominal compartment height for compatible circuit-breaker arrangements.
• 800 mm nominal switchboard width for the specified enclosure configuration.
• Designed for structures incorporating an intermediate rear upright.
• Supports Form 3b internal segregation arrangements when installed with the required complementary components.
• Durable pickled steel sheet construction for professional electrical enclosure applications.
• Provides physical separation on the outgoing connection side of compatible circuit-breaker compartments.
• Suitable for specified ABB Tmax T5, T6, T7 and SACE Emax 2 E1.2 circuit-breaker installations.
• Compact mechanical design supports organised switchboard compartment layouts.
• Dedicated ABB accessory simplifies component selection for compatible modular switchboard assemblies.

Key Features

• ABB System pro E Power low-voltage switchboard accessory.
• PRVS2082 manufacturer type designation.
• 1STQ008825A0000 ABB manufacturer order code.
• Rear vertical output-side segregation for electrical distribution assemblies.
• 200 mm nominal compartment height.
• 800 mm nominal switchboard width.
• 195 mm actual component height.
• 365.7 mm actual component width.
• 22 mm actual component depth.
• 1.095 kg component weight.
• Manufactured from pickled steel sheet.
• Designed for intermediate rear upright installation.
• Compatible with applicable fixed and interlocked ABB T5, T6, T7 and E1.2 circuit-breaker arrangements.
• Supports Form 3b switchboard segregation configurations.
• Mechanical mounting accessory for professional electrical panel construction.

Reliable Output-Side Segregation for Low-Voltage Distribution Switchboards

Internal segregation is an important consideration in the design and construction of low-voltage electrical switchboards. Mechanical partition components establish physical boundaries between designated functional areas, helping panel builders organise circuit-breaker compartments, busbar sections and connection spaces within electrical distribution assemblies.

The ABB PRVS2082 rear vertical segregation is specifically designed for the outgoing connection side of compatible vertical circuit-breaker compartments. Within System pro E Power structures incorporating an intermediate rear upright, the component provides a dedicated separation element between the intermediate upright and the rear structural upright on the output side.

The PRVS2082 is specified for a 200 mm nominal compartment height and 800 mm switchboard width. Its actual component dimensions of 195 × 365.7 × 22 mm allow it to fit the designated internal segregation arrangement. This distinction between nominal installation dimensions and physical component dimensions is important when selecting accessories for an existing switchboard or planning a new assembly.

As part of ABB's coordinated System pro E Power Form 3b segregation range, the PRVS2082 can be combined with compatible horizontal shelves, side partitions and other internal segregation components. The required segregation form is achieved through the complete switchboard arrangement rather than by any single accessory. Correct component selection and installation must follow the applicable ABB technical documentation.

Manufactured from pickled steel sheet, the PRVS2082 provides a durable mechanical solution for professional electrical enclosure construction. It is an internal segregation accessory rather than a complete main distribution board, circuit breaker or standalone electrical protection device.

Typical Applications

• ABB System pro E Power low-voltage main distribution switchboards.
• Industrial electrical distribution assemblies.
• Commercial building main distribution panels.
• Rear vertical output-side compartment segregation.
• Form 3b internal switchboard separation arrangements.
• Vertical ABB Tmax T5, T6 and T7 circuit-breaker installations.
• Compatible ABB SACE Emax 2 E1.2 circuit-breaker compartments.
• Switchboard structures incorporating intermediate rear uprights.
• Modular electrical enclosure construction and assembly.
• OEM electrical panel manufacturing and switchboard integration.
• Replacement of compatible rear vertical segregation components.
• Industrial power distribution infrastructure and engineered switchboard projects.