Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008793A0000 ABB PRVS6081 System pro E Power Vertical Rear Segregation H600 W800 Upper Internal Partition
ABB PRVS6081 System pro E Power vertical rear segregation accessory with an upper internal partition arrangement, designed for compatible low-voltage switchgear assemblies with a nominal height of 600 mm and cabinet width of 800 mm.
£51.33
Why Choose the ABB PRVS6081 System pro E Power Vertical Rear Segregation?
The ABB PRVS6081 is a dedicated vertical rear segregation component with an upper internal partition arrangement, designed for compatible ABB System pro E Power low-voltage switchgear assemblies. Part of the ABB System pro E Power modular distribution system, this accessory supports the physical separation and organisation of internal compartments within professional electrical distribution boards.
Specified for a 600 mm nominal segregation height and 800 mm nominal cabinet width, the PRVS6081 provides a manufacturer-specific solution for compatible rear compartment segregation arrangements. Its designation, SEGR.VERT.REAR H=600MM W=800MM INT.UP., identifies a vertical rear segregation configuration incorporating an upper internal partition arrangement.
Designed for professional electrical panel builders and switchgear manufacturers, the ABB PRVS6081 supports organised internal layouts and integration with compatible System pro E Power enclosure structures and segregation accessories. Identified by ABB manufacturer order code 1STQ008793A0000, it provides a dedicated component for industrial and commercial electrical distribution projects requiring vertical rear compartment separation with an upper internal partition configuration.
Key Advantages
- Purpose-designed vertical rear segregation accessory for ABB System pro E Power switchgear.
- Specified for a 600 mm nominal height and 800 mm nominal cabinet width.
- Features an upper internal partition arrangement identified by the manufacturer designation INT.UP.
- Supports physical separation between designated internal switchgear compartments.
- Provides a dedicated solution for compatible rear segregation configurations.
- Integrates with the modular ABB System pro E Power low-voltage distribution platform.
- Helps electrical panel builders establish organised and consistent internal cabinet layouts.
- Supports professional switchboard assembly using manufacturer-specific components.
- Provides accurate product identification through ABB order code 1STQ008793A0000.
Key Features
- ABB System pro E Power modular switchgear accessory.
- PRVS6081 manufacturer model designation.
- Vertical segregation configuration.
- Rear compartment positioning within compatible switchgear assemblies.
- Upper internal partition arrangement specified as INT.UP.
- 600 mm nominal segregation height.
- 800 mm nominal cabinet width.
- Designed for compatible internal switchgear compartment arrangements.
- Supports modular low-voltage distribution board construction.
- Intended for integration with suitable ABB System pro E Power structural and segregation components.
- Manufacturer designation SEGR.VERT.REAR H=600MM W=800MM INT.UP..
- ABB order code 1STQ008793A0000.
Vertical Rear Segregation with Upper Internal Partition Arrangement
Internal compartment segregation is an important consideration in the design and construction of low-voltage electrical distribution assemblies. Dedicated segregation components help establish defined boundaries between equipment areas, supporting organised switchboard layouts and the implementation of specified internal separation arrangements.
The ABB PRVS6081 provides a vertical rear segregation solution for compatible System pro E Power switchgear configurations. Its specified 600 mm nominal height and 800 mm nominal width identify the intended modular compartment arrangement within the corresponding switchgear system.
The manufacturer designation includes INT.UP., identifying an upper internal partition arrangement. This distinguishes the PRVS6081 from segregation components intended for different partition positions or configurations and helps panel builders select the appropriate accessory for the specified assembly design.
Vertical rear segregation components are used in suitable switchgear layouts to establish physical separation between designated internal areas. The PRVS6081 supports this function within compatible ABB System pro E Power arrangements, where the approved switchboard design calls for rear segregation and an upper internal partition configuration.
ABB System pro E Power is a modular platform for constructing low-voltage distribution switchboards, incorporating cabinet structures, busbar systems, mounting accessories and internal segregation components. These products support configurable main distribution board assemblies for industrial, commercial and infrastructure installations.
The PRVS6081 is a mechanical segregation accessory rather than an electrical protection device. Its specified height and width identify the intended assembly configuration and should not automatically be interpreted as the exact external dimensions of the supplied component.
The final form of internal separation, electrical performance and compliance with applicable standards, including IEC 61439 where relevant, depend on the complete assembly and its verified design. Selection and installation should follow ABB's applicable technical documentation, including confirmation of compatible cabinet structures and partition components.
Typical Applications
- ABB System pro E Power low-voltage distribution switchboards.
- Vertical rear compartment segregation within compatible switchgear.
- Internal segregation arrangements incorporating an upper partition configuration.
- Main electrical distribution board construction.
- Industrial low-voltage switchgear installations.
- Commercial building electrical distribution systems.
- Modular switchboard manufacturing and electrical panel-building projects.
- Internal compartment organisation and partition arrangements.
- Compatible switchgear configurations requiring 600 mm high rear segregation for an 800 mm nominal cabinet width.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ008793A0000 |
| Manufacturer designation | SEGR.VERT.REAR H=600MM W=800MM INT.UP. |
| Product type | Vertical rear segregation accessory |
| Segregation orientation | Vertical |
| Segregation position | Rear |
| Internal partition arrangement | Upper internal partition (INT.UP.) |
| Nominal segregation height | 600 mm |
| Nominal cabinet width | 800 mm |
| Installation arrangement | Internal rear compartment segregation |
| Compatible system | ABB System pro E Power |
| Application | Low-voltage switchgear compartment separation |
| Product group | System Pro E Power |
| Component classification | Switchgear internal segregation and partition accessory |
Frequently Asked Questions
What is the ABB PRVS6081 used for?
The ABB PRVS6081 is a vertical rear segregation accessory designed for compatible ABB System pro E Power low-voltage switchgear assemblies. It supports physical separation between designated internal compartments and is specified for an upper internal partition arrangement.
What dimensions is the ABB PRVS6081 designed for?
The PRVS6081 is specified for a 600 mm nominal segregation height and an 800 mm nominal cabinet width. These values identify the intended modular installation configuration rather than necessarily representing every external dimension of the individual component.
What does INT.UP. mean in the ABB PRVS6081 designation?
The designation INT.UP. identifies an upper internal partition arrangement associated with the PRVS6081 vertical rear segregation component. The exact installation details should be confirmed using ABB's applicable assembly documentation.
Which ABB switchgear system is compatible with the PRVS6081?
The PRVS6081 belongs to the ABB System pro E Power modular low-voltage switchgear range. Its suitability for a particular cabinet or compartment arrangement should be verified against ABB's applicable technical documentation.
What is the ABB manufacturer order code for the PRVS6081?
The ABB manufacturer order code is 1STQ008793A0000, corresponding to model PRVS6081 in the System pro E Power product range.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power provides modular components for professional low-voltage switchgear construction. The PRVS6081 vertical rear segregation accessory supports organised internal compartment arrangements with a specified 600 mm nominal height, 800 mm nominal cabinet width and upper internal partition configuration, helping panel builders develop compatible electrical distribution assemblies.
