1STQ008774A0000 ABB PRVS1761 Rear Vertical Busbar-Side Segregation 175 x 600 mm

1STQ008774A0000 ABB PRVS1761 Rear Vertical Busbar-Side Segregation 175 x 600 mm

ABB PRVS1761 (1STQ008774A0000) is a System pro E Power rear vertical busbar-side segregation accessory for 175 mm high and 600 mm wide arrangements in compatible low-voltage main distribution boards with intermediate rear uprights.

SKU: 1STQ008774A0000Alt SKU: PRVS1761MPN: 1STQ008774A0000
Price
List Price £35.17 ex VAT
Your Price (ex VAT)
£35.17
Manufacturer Lead Time Estimated Delivery 3 weeks
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £35.17
Trade pricing is personalised to your account

Manufacturer Lead Time

£35.17

Why Choose the ABB PRVS1761 Rear Vertical Busbar Segregation Panel?

The ABB PRVS1761 (1STQ008774A0000) is a dedicated rear vertical busbar-side segregation accessory for compatible low-voltage main distribution boards. Part of the ABB System pro E Power range, this component is specified for a 175 mm nominal segregation height and 600 mm nominal segregation width, supporting internal separation in modular switchboard assemblies.

Designed for vertical circuit-breaker segregation on the busbar side, the PRVS1761 is intended for compatible switchboard structures incorporating an intermediate rear upright. Its position within the assembly helps establish a physical barrier between designated internal areas, supporting the construction of organised and appropriately segregated electrical distribution compartments.

The PRVS1761 is listed in ABB's System pro E Power segregation range for selected fixed or interlocked T5, T6, T7 and E1.2 circuit-breaker arrangements. Its nominal segregation height corresponds to half the relevant compartment height in the specified configuration, making it a purpose-selected component for professional switchboard manufacturers, electrical panel builders and industrial power distribution specialists.

Key Advantages

  • Genuine ABB System pro E Power segregation accessory for modular low-voltage main distribution boards.
  • Designed for 175 mm high × 600 mm wide rear vertical segregation arrangements.
  • Provides dedicated busbar-side physical separation in compatible circuit-breaker compartments.
  • Intended for switchboard structures incorporating an intermediate rear upright.
  • Suitable for selected fixed or interlocked T5, T6, T7 and E1.2 circuit-breaker configurations.
  • Supports the implementation of Form 3b internal segregation arrangements when combined with the required complementary components.
  • Helps establish defined boundaries between designated internal switchboard areas.
  • Provides a manufacturer-specific component for professional switchboard assembly, modification and maintenance.

Key Features

  • ABB System pro E Power series main distribution board accessory.
  • PRVS1761 rear vertical segregation component.
  • 175 mm nominal segregation height.
  • 600 mm nominal segregation width.
  • Rear vertical mounting orientation within a compatible switchboard compartment.
  • Designed for installation on the busbar side of designated circuit-breaker arrangements.
  • Compatible with specified structures incorporating an intermediate rear upright.
  • Nominal segregation height corresponds to half the compartment height in the relevant ABB configuration.
  • Supports selected T5, T6, T7 and E1.2 circuit-breaker installations.
  • Designed for integration with complementary System pro E Power structural and segregation accessories.
  • Suitable for industrial and commercial low-voltage power distribution assemblies.
  • Supplied as a single segregation accessory according to the catalogue packaging quantity.

Purpose-Designed Busbar-Side Segregation for Circuit-Breaker Compartments

Internal segregation is an important consideration in the design of low-voltage electrical switchboards. Physical partitions help establish boundaries between functional units, busbar areas and connection compartments. The ABB PRVS1761 is specifically intended for rear vertical segregation on the busbar side of selected circuit-breaker installations, rather than for general-purpose enclosure partitioning.

Within the relevant ABB System pro E Power configuration, the separator is positioned in a structure with an intermediate rear upright. Its nominal 175 mm height corresponds to half the compartment height, while the 600 mm nominal width relates to the designated separation arrangement between structural uprights on the busbar side. These catalogue dimensions describe the intended segregation configuration and should not be confused with independently measured overall component dimensions.

The ABB System pro E Power platform supports modular low-voltage main distribution switchboards for industrial and commercial installations. Its range of circuit-breaker mounting kits, structural accessories and internal barriers allows panel builders to select components for specific compartment arrangements. The PRVS1761 contributes to this system by providing a dedicated rear segregation component for selected vertical circuit-breaker configurations.

When installed with the required complementary ABB components, the PRVS1761 can form part of a Form 3b segregation arrangement designed in accordance with the applicable requirements of IEC/EN 61439-2. The final segregation form, electrical clearances, protective characteristics and assembly compliance depend on the complete switchboard design. The PRVS1761 is a mechanical separation accessory and does not independently establish an electrical rating or a complete segregation form.

Typical Applications

  • ABB System pro E Power low-voltage main distribution boards.
  • Rear vertical segregation on the busbar side of circuit-breaker compartments.
  • Selected fixed or interlocked T5, T6, T7 and E1.2 circuit-breaker installations.
  • Switchboard structures incorporating intermediate rear uprights.
  • Form 3b internal segregation arrangements using appropriate complementary components.
  • Industrial electrical power distribution switchboards.
  • Commercial building main distribution assemblies.
  • Modular electrical panel construction and system integration.
  • Internal separation of designated busbar-side compartment areas.
  • Compatible switchboard refurbishment and component replacement.

Technical Specifications

Series System pro E Power
Product family PRVS
ABB order code 1STQ008774A0000
Manufacturer product group Main Distribution Board / System pro E Power
Product type Rear vertical busbar-side segregation accessory
Catalogue description Vertical segregation on bottom busbar side
Product category Low-voltage switchboard segregation accessories
Nominal segregation height 175 mm
Nominal segregation width 600 mm
Segregation orientation Vertical
Segregation position Rear, busbar side
Structural configuration Intermediate rear upright
Compartment relationship Segregation height equal to half the specified compartment height
Compatible circuit-breaker arrangements Selected fixed or interlocked T5, T6, T7 and E1.2 configurations
Segregation application Form 3b internal separation arrangements
Material Steel
Catalogue package quantity 1 piece
EAN 8015646795359
Suitable for Low-voltage main distribution boards
Compatible system ABB System pro E Power

Frequently Asked Questions

What is the ABB PRVS1761 used for?

The ABB PRVS1761 is a rear vertical segregation accessory for the busbar side of selected circuit-breaker compartments in ABB System pro E Power main distribution boards. It provides physical separation within compatible switchboard structures incorporating an intermediate rear upright.

What are the nominal dimensions of the ABB PRVS1761?

The ABB catalogue specifies a 175 mm nominal segregation height and 600 mm nominal segregation width. These dimensions describe the intended segregation arrangement and should not be treated as independently verified overall physical measurements of the component.

Which circuit-breakers can the ABB PRVS1761 be used with?

The PRVS1761 is listed for selected fixed or interlocked T5, T6, T7 and E1.2 circuit-breaker arrangements in compatible System pro E Power structures with intermediate rear uprights. The complete mounting and segregation configuration must be checked against the relevant ABB selection and assembly instructions.

What is the difference between the ABB PRVS1761 and PRVS1762?

The PRVS1761 is intended for busbar-side rear vertical segregation, whereas the PRVS1762 is the corresponding output-side rear vertical segregation accessory in the relevant ABB catalogue arrangements. They serve different positions within the switchboard and should be selected according to the required compartment layout.

Does the ABB PRVS1761 independently provide Form 3b segregation?

No. The PRVS1761 is an individual mechanical segregation accessory that can contribute to a Form 3b internal separation arrangement. The required segregation form is achieved through the complete switchboard configuration, including the correct complementary barriers, structural components and installation details.

Trusted by Electrical Panel Builders Worldwide

ABB System pro E Power components support professional electrical panel builders and power distribution specialists with a modular approach to low-voltage switchboard construction. The ABB PRVS1761 rear vertical busbar-side segregation accessory provides a dedicated solution for 175 mm high × 600 mm wide segregation arrangements in compatible circuit-breaker compartments incorporating an intermediate rear upright.