Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008767A0000 ABB PRVS2541 Vertical Rear Segregation H250 W400 mm Intermediate Upright – System pro E Power
ABB PRVS2541 vertical rear segregation component specified for a height of 250 mm and width of 400 mm with an intermediate upright arrangement for compatible System pro E power low-voltage switchgear assemblies.
£36.23
Why Choose the ABB PRVS2541 Vertical Rear Segregation Component?
The ABB PRVS2541 is a dedicated vertical rear segregation component for intermediate upright arrangements within ABB System pro E power low-voltage switchgear assemblies. Specified for a 250 mm height and 400 mm width, this accessory supports physical separation between designated internal sections of compatible electrical distribution cabinets.
As part of the ABB System pro E power range, the PRVS2541 is intended for professional electrical panel builders, switchgear manufacturers and industrial power distribution applications. Its vertical rear segregation configuration is associated with an intermediate upright arrangement, making it a specific component for compatible modular enclosure installations.
The ABB PRVS2541 vertical rear segregation accessory provides a manufacturer-specified solution for switchgear arrangements requiring a 250 mm high and 400 mm wide segregation component. Identified by ABB manufacturer order code 1STQ008767A0000, it supports accurate accessory selection, coordinated internal compartment design and professional low-voltage switchgear assembly.
Key Advantages
- ABB System pro E power compatibility: Developed for use within compatible modular low-voltage switchgear assemblies.
- Vertical rear segregation: Supports physical separation between designated internal cabinet sections.
- Intermediate upright arrangement: Specifically identified for a segregation configuration incorporating an intermediate upright.
- 250 mm height specification: Provides a clear dimensional reference for component selection.
- 400 mm width specification: Supports selection for the corresponding cabinet segregation arrangement.
- Organised internal layouts: Helps electrical panel builders establish structured compartment arrangements.
- Modular system integration: Associated with ABB's coordinated System pro E power enclosure platform.
- Accurate procurement: Dedicated ABB manufacturer order code simplifies product identification and replacement.
Key Features
- ABB System pro E power switchgear enclosure accessory.
- PRVS2541 manufacturer model designation.
- Vertical rear segregation component configuration.
- Intermediate upright arrangement identified in the manufacturer description.
- 250 mm manufacturer-specified height.
- 400 mm manufacturer-specified width.
- Designed for compatible internal switchgear segregation arrangements.
- Supports physical separation within designated rear cabinet sections.
- Intended for integration with compatible ABB System pro E power enclosure components.
- Suitable for professional electrical panel-building and switchgear manufacturing projects.
- ABB manufacturer order code 1STQ008767A0000.
Vertical Rear Segregation with Intermediate Uprights for Low-Voltage Switchgear
Internal segregation is an important consideration in the design and construction of low-voltage switchgear assemblies. Segregation components help establish physical boundaries between designated cabinet sections, supporting organised arrangements for electrical devices, conductors and associated distribution equipment. Intermediate uprights may form part of the enclosure's internal structural arrangement, making the selection of appropriately configured segregation components important for coordinated assembly.
The ABB PRVS2541 is specified as a 250 mm × 400 mm vertical rear segregation component for an intermediate upright arrangement within the System pro E power range. Its exact mounting position, installation hardware and compatibility with individual cabinet configurations should be verified against ABB's technical documentation. The final degree of internal separation and any applicable IEC/EN 61439 compliance requirements depend on the design, installation and verification of the complete switchgear assembly rather than this component alone.
Typical Applications
- ABB System pro E power low-voltage switchgear assemblies.
- Industrial electrical power distribution cabinets.
- Main low-voltage switchboards and distribution panels.
- Vertical rear compartment segregation within compatible modular enclosures.
- Internal segregation arrangements incorporating intermediate uprights.
- Commercial and industrial power distribution installations.
- Professional electrical panel-building and switchgear manufacturing projects.
- Compatible enclosure configurations requiring 250 mm high and 400 mm wide vertical rear segregation.
Technical Specifications
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ008767A0000 |
| Manufacturer product description | SEGR.VERT.REAR H=250MM W=400MM INT.UP. |
| Product type | Vertical rear segregation component |
| Product category | Low-voltage switchgear enclosure accessories |
| Segregation orientation | Vertical |
| Segregation position | Rear |
| Specified height | 250 mm |
| Specified width | 400 mm |
| Dimensional configuration | H250 × W400 mm |
| Upright arrangement | Intermediate upright (INT.UP.) |
| Application | Internal compartment segregation in compatible low-voltage switchgear assemblies |
| System compatibility | ABB System pro E power |
Frequently Asked Questions
What is the ABB PRVS2541 used for?
The ABB PRVS2541 is a vertical rear segregation component intended to support physical separation between designated internal sections of compatible ABB System pro E power low-voltage switchgear assemblies incorporating an intermediate upright arrangement.
What are the specified dimensions of the ABB PRVS2541?
The ABB PRVS2541 is specified with a height of 250 mm and width of 400 mm, as identified by the manufacturer description SEGR.VERT.REAR H=250MM W=400MM INT.UP. These dimensions identify the specified segregation configuration; detailed physical measurements should be checked against ABB's technical drawings.
What does INT.UP. mean in the ABB PRVS2541 description?
INT.UP. refers to an intermediate upright arrangement. The PRVS2541 is identified for vertical rear segregation associated with this configuration, although the exact mounting method and any additional components required should be confirmed using ABB's installation documentation.
Which ABB enclosure system is compatible with the PRVS2541?
The PRVS2541 belongs to the ABB System pro E power range of modular low-voltage switchgear enclosure accessories. Compatibility with a particular cabinet and intermediate upright arrangement should be verified against the manufacturer's technical documentation.
What is the ABB manufacturer order code for the PRVS2541?
The manufacturer order code is 1STQ008767A0000, corresponding to the ABB PRVS2541 vertical rear segregation component specified for a 250 mm height, 400 mm width and intermediate upright arrangement.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power provides a modular enclosure platform for professional low-voltage electrical distribution assemblies. Accessories such as the PRVS2541 vertical rear segregation component support coordinated internal compartment arrangements and help electrical panel builders select manufacturer-specified components for compatible ABB switchgear configurations.
