Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008760A0000 ABB PSHS6090 System pro E Power Horizontal Rear Segregation W600 D900
ABB PSHS6090 System pro E Power horizontal rear segregation accessory designed for compatible low-voltage switchgear assemblies with a nominal cabinet width of 600 mm and depth of 900 mm.
£79.04
Why Choose the ABB PSHS6090 System pro E Power Horizontal Rear Segregation?
The ABB PSHS6090 is a dedicated horizontal rear segregation component designed for compatible ABB System pro E Power low-voltage switchgear assemblies. Part of the ABB System pro E Power modular distribution system, this accessory supports the physical separation and organisation of internal compartments within professional electrical distribution boards.
Specified for a 600 mm nominal cabinet width and 900 mm nominal cabinet depth, the PSHS6090 provides a manufacturer-specific solution for compatible horizontal rear compartment segregation arrangements. Its designation, SEGR.HOR.REAR W=600MM D=900MM, identifies the intended segregation orientation, rear positioning and modular cabinet dimensions.
Designed for professional electrical panel builders and switchgear manufacturers, the ABB PSHS6090 supports organised internal layouts and integration with compatible System pro E Power enclosure structures and partition accessories. Identified by ABB manufacturer order code 1STQ008760A0000, it provides a dedicated component for industrial and commercial electrical distribution projects requiring horizontal rear compartment separation.
Key Advantages
- Purpose-designed horizontal rear segregation accessory for ABB System pro E Power switchgear.
- Specified for a 600 mm nominal cabinet width and 900 mm nominal cabinet depth.
- Supports physical separation between designated internal switchgear compartments.
- Provides a dedicated solution for compatible rear segregation arrangements.
- Integrates with the modular ABB System pro E Power low-voltage distribution platform.
- Helps electrical panel builders establish organised and consistent internal cabinet layouts.
- Supports professional switchboard assembly using manufacturer-specific components.
- Facilitates the selection of compatible segregation accessories for deeper switchgear cabinet configurations.
- Suitable for compatible industrial and commercial low-voltage distribution board installations.
Key Features
- ABB System pro E Power modular switchgear accessory.
- PSHS6090 manufacturer model designation.
- Horizontal segregation configuration.
- Rear compartment positioning within compatible switchgear assemblies.
- 600 mm nominal cabinet width.
- 900 mm nominal cabinet depth.
- Designed for compatible internal switchgear compartment arrangements.
- Supports modular low-voltage distribution board construction.
- Intended for integration with suitable ABB System pro E Power structural and segregation components.
- Manufacturer designation SEGR.HOR.REAR W=600MM D=900MM.
- ABB order code 1STQ008760A0000.
Horizontal Rear Compartment Segregation for Low-Voltage Switchgear
Internal compartment segregation is an important consideration in the design and construction of low-voltage electrical distribution assemblies. Dedicated partition components help establish defined boundaries between equipment areas, supporting organised switchboard layouts and the implementation of specified internal separation arrangements.
The ABB PSHS6090 provides a horizontal rear segregation solution for compatible System pro E Power switchgear configurations. Its specified 600 mm nominal width and 900 mm nominal depth identify the intended cabinet configuration within the corresponding modular switchgear system.
Horizontal segregation components are used in suitable switchgear layouts to establish separation between designated internal areas. The rear positioning of the PSHS6090 makes it a dedicated accessory for compatible rear compartment arrangements, where the approved switchboard design requires horizontal segregation.
ABB System pro E Power is a modular platform for constructing low-voltage distribution switchboards, incorporating cabinet structures, busbar systems, mounting accessories and internal segregation components. These products support configurable main distribution board assemblies for industrial, commercial and infrastructure installations.
The PSHS6090 is a mechanical segregation accessory rather than an electrical protection device. Its specified width and depth identify the intended cabinet configuration and should not automatically be interpreted as the exact external dimensions of the individual component.
The final form of internal separation, electrical performance and compliance with applicable standards, including IEC 61439 where relevant, depend on the complete assembly and its verified design. Selection and installation should follow ABB's applicable technical documentation, including confirmation of compatible cabinet structures and adjacent segregation components.
Typical Applications
- ABB System pro E Power low-voltage distribution switchboards.
- Horizontal rear compartment segregation within compatible switchgear.
- Main electrical distribution board construction.
- Industrial low-voltage switchgear installations.
- Commercial building electrical distribution systems.
- Modular switchboard manufacturing and electrical panel-building projects.
- Internal compartment organisation and partition arrangements.
- Compatible switchgear configurations requiring rear segregation for a 600 mm nominal cabinet width.
- System pro E Power cabinet arrangements with a 900 mm nominal depth.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ008760A0000 |
| Manufacturer designation | SEGR.HOR.REAR W=600MM D=900MM |
| Product type | Horizontal rear segregation accessory |
| Segregation orientation | Horizontal |
| Segregation position | Rear |
| Nominal cabinet width | 600 mm |
| Nominal cabinet depth | 900 mm |
| Installation arrangement | Internal rear compartment segregation |
| Compatible system | ABB System pro E Power |
| Application | Low-voltage switchgear compartment separation |
| Product group | System Pro E Power |
| Component classification | Switchgear internal segregation and partition accessory |
Frequently Asked Questions
What is the ABB PSHS6090 used for?
The ABB PSHS6090 is a horizontal rear segregation accessory designed to provide physical separation between designated internal compartments within compatible ABB System pro E Power low-voltage switchgear assemblies.
What dimensions is the ABB PSHS6090 designed for?
The PSHS6090 is specified for a 600 mm nominal cabinet width and a 900 mm nominal cabinet depth. These values identify the intended installation configuration rather than necessarily representing every external dimension of the individual component.
Where is the ABB PSHS6090 installed?
The PSHS6090 is designed for horizontal rear segregation within compatible System pro E Power switchgear assemblies. Its exact mounting position and arrangement should be confirmed using ABB's applicable installation documentation.
Which ABB switchgear system is compatible with the PSHS6090?
The PSHS6090 belongs to the ABB System pro E Power modular low-voltage switchgear range. Its suitability for a particular cabinet or compartment arrangement should be verified against ABB's applicable assembly documentation.
What is the ABB manufacturer order code for the PSHS6090?
The ABB manufacturer order code is 1STQ008760A0000, corresponding to model PSHS6090 in the System pro E Power product range.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power provides modular components for professional low-voltage switchgear construction. The PSHS6090 horizontal rear segregation accessory supports organised internal compartment arrangements for compatible cabinets with a specified 600 mm nominal width and 900 mm nominal depth, helping panel builders develop structured electrical distribution assemblies.
