Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008720A0000 ABB PCBS1510 System Pro E Power Blind Segregation Cell 150 x 1000mm
ABB PCBS1510 (1STQ008720A0000) System Pro E Power blind segregation cell measuring 150 mm high and 1000 mm wide, designed for compatible internal compartmentalisation arrangements in low-voltage electrical switchboards.
£68.44
Why Choose the ABB PCBS1510 Blind Cell for System Pro E Power Segregation?
The ABB PCBS1510 (1STQ008720A0000) is a purpose-designed blind cell for segregation within the ABB System Pro E Power modular low-voltage switchboard range. Featuring a nominal height of 150 mm and width of 1000 mm, this enclosure accessory is intended for compatible switchboard arrangements requiring a dedicated blind cell component as part of their internal compartmentalisation and segregation system.
Developed for professional electrical panel builders, switchgear manufacturers and industrial power distribution system integrators, the ABB PCBS1510 supports the organised construction of modular electrical distribution assemblies. Its blind configuration provides a solid covering arrangement for the designated cell position, helping create a defined physical boundary within compatible System Pro E Power segregation layouts.
The PCBS1510 is specified as a blind cell for segregation measuring 150 mm high × 1000 mm wide. It is designed for integration with the corresponding ABB System Pro E Power enclosure and segregation components. Correct selection of the blind cell helps maintain the intended compartment arrangement, while the overall degree of internal separation depends on the complete switchboard construction and the appropriate installation of all associated components.
Key Advantages
- Dedicated segregation accessory: Designed for compatible ABB System Pro E Power internal segregation arrangements.
- Blind cell configuration: Provides a solid covering component for the designated switchboard cell position.
- 150 mm nominal height: Matches the specified segregation cell height.
- 1000 mm nominal width: Designed for compatible switchboard arrangements requiring this cell width.
- Modular enclosure integration: Supports coordinated assembly with ABB System Pro E Power components.
- Physical compartment separation: Contributes to the defined segregation arrangement when correctly installed.
- Organised switchboard construction: Helps panel builders establish consistent internal compartment layouts.
- Application-specific dimensions: Simplifies selection of the appropriate blind cell for the intended assembly.
- Professional installation: Designed for integration into low-voltage electrical distribution switchboards.
- System compatibility: Supports the use of coordinated ABB enclosure and segregation accessories.
Key Features
- Original ABB System Pro E Power modular switchboard accessory.
- PCBS1510 manufacturer product designation.
- ABB order code: 1STQ008720A0000.
- Blind cell configuration.
- Designed for compatible internal segregation arrangements.
- 150 mm nominal cell height.
- 1000 mm nominal cell width.
- Solid covering arrangement for the designated segregation cell position.
- Intended for use with compatible System Pro E Power enclosure structures.
- Supports modular compartmentalisation within electrical distribution assemblies.
- Designed for coordinated installation with appropriate segregation and mounting accessories.
- Suitable for professional electrical panel building and switchgear manufacturing.
Technical Specifications
- Manufacturer: ABB
- Product range: System Pro E Power
- Product designation: PCBS1510
- ABB order code: 1STQ008720A0000
- Manufacturer description: BLIND CELL FOR SEGR. H=150MM W=1000MM
- Product type: Blind cell for segregation
- Cell configuration: Blind / solid
- Intended function: Internal switchboard segregation
- Nominal height: 150 mm
- Nominal width: 1000 mm
- Nominal dimensions (H × W): 150 × 1000 mm
- Compatible enclosure system: ABB System Pro E Power
- Installation application: Segregation cell integration in compatible switchboard assemblies
- Equipment category: Low-voltage electrical switchboard enclosure accessories
- Accessory classification: Blind segregation cell
Reliable Internal Segregation and Modular Switchboard Integration
The ABB PCBS1510 blind cell is intended for use in compatible System Pro E Power switchboards where a defined segregation cell arrangement is required. Internal segregation components are used in low-voltage switchgear assemblies to establish physical boundaries between designated areas, helping organise the arrangement of electrical equipment, conductors and associated functional sections.
The blind configuration provides a solid covering component rather than an open or equipment-accessible cell arrangement. This makes the PCBS1510 suitable for designated positions where the switchboard design requires a closed segregation cell. Its intended function should be considered as part of the complete internal separation system rather than as an independent protective barrier with a separately established performance rating.
With a nominal height of 150 mm and width of 1000 mm, the PCBS1510 provides a defined dimensional configuration for compatible segregation layouts. These dimensions are important when coordinating the blind cell with adjacent compartment components, internal supports and other System Pro E Power accessories. The cell should be selected according to the intended enclosure arrangement and the relevant ABB assembly documentation.
Internal separation within low-voltage switchgear assemblies may be designed to meet particular segregation requirements under IEC/EN 61439. However, the installation of a blind cell alone does not establish a particular form of separation, such as Form 2, Form 3 or Form 4. The achieved segregation arrangement depends on the complete assembly, including partitions, barriers, equipment positions, cable connections and the correct installation of all relevant components.
The PCBS1510 is a mechanical switchboard accessory and does not independently provide overload protection, short-circuit protection or an ingress protection rating. Its contribution to the completed assembly depends on correct integration with compatible ABB System Pro E Power components and the overall switchboard design.
Typical Applications
- ABB System Pro E Power modular low-voltage switchboards.
- Internal segregation arrangements within electrical distribution assemblies.
- Industrial main and sub-distribution switchboards.
- Commercial building electrical distribution systems.
- Modular switchgear assemblies requiring blind segregation cells.
- Compatible switchboard cell positions measuring 150 mm high and 1000 mm wide.
- Electrical distribution assemblies incorporating internal compartment boundaries.
- Switchboard layouts requiring solid covering components for designated segregation cells.
- OEM switchgear manufacturing and professional electrical panel building.
- New switchboard construction using coordinated ABB segregation accessories.
- Refurbishment of compatible System Pro E Power assemblies where the specified blind cell is required.
Frequently Asked Questions
What is the ABB PCBS1510 used for?
The ABB PCBS1510 (1STQ008720A0000) is a blind cell designed for compatible internal segregation arrangements within ABB System Pro E Power low-voltage switchboards. It provides a solid covering component for a designated segregation cell position.
What are the dimensions of the ABB PCBS1510?
The PCBS1510 has a nominal height of 150 mm and a nominal width of 1000 mm, corresponding to the specified System Pro E Power segregation cell arrangement.
What does blind cell for segregation mean?
A blind cell for segregation is a solid covering component used in a designated internal switchboard cell position. The PCBS1510 supports the physical compartmentalisation of compatible System Pro E Power assemblies when installed with the appropriate segregation components.
Does the ABB PCBS1510 provide a specific IEC 61439 form of separation?
The PCBS1510 is a component intended for internal segregation, but it does not independently establish a particular IEC/EN 61439 form of separation. The achieved segregation classification depends on the complete switchboard design, associated partitions and barriers, and correct assembly.
Which ABB enclosure system is compatible with the PCBS1510, and are mounting accessories included?
The PCBS1510 belongs to the ABB System Pro E Power modular switchboard range and is intended for compatible segregation cell arrangements measuring 150 mm high × 1000 mm wide. The exact mounting hardware and any additional segregation components required should be checked against ABB's assembly documentation, as their inclusion is not established by the product designation alone.
Designed for Professional Electrical Switchboard Builders
ABB System Pro E Power enclosure and segregation accessories support the construction of organised, modular low-voltage electrical distribution assemblies. The ABB PCBS1510 provides a dedicated blind segregation cell measuring 150 mm high × 1000 mm wide, helping professional panel builders integrate solid cell covering components into compatible switchboard compartmentalisation arrangements.
