Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008716A0000 ABB PCBS2080 Blind Cell for Segregation H200 W800 mm System pro E power
ABB PCBS2080 (1STQ008716A0000) is a blind cell for segregation within compatible System pro E power low-voltage switchboards, specified for a nominal compartment height of 200 mm and width of 800 mm.
£66.55
Why Choose the ABB PCBS2080 Blind Cell for Segregation?
The ABB PCBS2080, manufacturer order code 1STQ008716A0000, is a dedicated blind cell for segregation within the ABB System pro E power low-voltage switchboard range. Identified by the manufacturer's designation BLIND CELL FOR SEGR. H=200MM W=800MM, this accessory is specified for a nominal compartment height of 200 mm and width of 800 mm.
Designed for compatible modular switchboard configurations, the PCBS2080 provides a blind-cell component for internal segregation arrangements. Its defined height and width support accurate accessory selection when planning compartment layouts, organising internal switchboard spaces and completing ABB System pro E power electrical distribution assemblies.
The ABB PCBS2080 blind segregation cell is particularly relevant to professional switchboard manufacturers, electrical contractors and maintenance teams requiring a manufacturer-specific accessory for a 200 mm high, 800 mm wide compartment configuration. Correct selection depends on the intended switchboard structure, associated segregation components and applicable ABB assembly instructions.
Key Advantages
- Dedicated blind cell for segregation within the ABB System pro E power range.
- Specified for a nominal compartment height of 200 mm.
- Designed for a nominal compartment width of 800 mm.
- Supports structured internal segregation layouts in compatible switchboard assemblies.
- Provides a manufacturer-specific accessory for the intended compartment configuration.
- Helps panel builders identify the appropriate blind-cell size during assembly planning.
- Supports consistent construction using compatible ABB System pro E power components.
- Provides a clear manufacturer reference for maintenance and replacement procurement.
- Relevant to industrial and commercial low-voltage power distribution installations.
- Can be included in electrical project specifications and switchboard bills of materials.
Key Features
- ABB PCBS2080 manufacturer type designation.
- 1STQ008716A0000 ABB manufacturer order code.
- System pro E power product group.
- Blind cell component configuration.
- Specifically designated for segregation.
- 200 mm nominal compatible compartment height.
- 800 mm nominal compatible compartment width.
- Intended for compatible low-voltage electrical switchboard assemblies.
- Supports the mechanical arrangement of internal segregation components.
- Designed for selection according to the applicable ABB compartment configuration.
- Exact material, finish and mounting hardware are not established by the supplied designation.
- Functions as an internal mechanical switchboard accessory, not as an electrical switching or circuit-protection device.
200 mm × 800 mm Blind Cell for ABB Switchboard Segregation
Low-voltage electrical switchboards incorporate internal compartment arrangements to organise protective devices, busbar systems, cable connections and associated structural components. Depending on the assembly design, segregation accessories help define boundaries between functional spaces and complete designated areas within the switchboard. The ABB PCBS2080 is specifically identified as a blind cell for segregation within the System pro E power range.
The manufacturer's designation BLIND CELL FOR SEGR. H=200MM W=800MM establishes the component's intended segregation application and its nominal 200 mm height and 800 mm width. These dimensions are important when selecting accessories for a particular switchboard compartment. They should not automatically be interpreted as the precise external measurements of the supplied component, which must be checked against ABB technical drawings.
The term blind cell identifies the product as a component intended for a blind-cell arrangement rather than an active electrical device. However, the supplied designation does not establish the exact panel profile, whether particular openings or fixing points are incorporated, or which adjacent components are required. Panel builders should verify the installation arrangement before treating the PCBS2080 as interchangeable with other compartment covers or segregation accessories.
Correct integration depends on the complete ABB System pro E power switchboard structure. The PCBS2080 alone does not establish a particular form of separation, ingress protection rating or electrical performance classification. These characteristics depend on the complete assembly, associated barriers and covers, and applicable design verification requirements.
Typical Applications
- ABB System pro E power low-voltage switchboard assemblies.
- Blind-cell arrangements within internal switchboard segregation systems.
- Nominal 200 mm high compartment configurations.
- Nominal 800 mm wide compartment configurations.
- Professional electrical panel manufacturing and assembly.
- Industrial electrical power distribution installations.
- Commercial building main distribution board projects.
- Replacement and procurement of matching ABB blind-cell segregation accessories.
Technical Specifications
| Product group | System pro E power |
|---|---|
| Model / type | PCBS2080 |
| ABB order code | 1STQ008716A0000 |
| Manufacturer designation | BLIND CELL FOR SEGR. H=200MM W=800MM |
| Product type | Blind cell for segregation |
| Component category | Internal switchboard segregation accessory |
| Nominal compatible compartment height | 200 mm |
| Nominal compatible compartment width | 800 mm |
| Segregation application | Internal switchboard compartment arrangement |
| Fixing hardware | Inclusion not confirmed by the supplied designation |
| Compatible switchboard system | ABB System pro E power |
| Primary application | Blind-cell provision within a compatible switchboard segregation arrangement |
Frequently Asked Questions
What is the ABB PCBS2080 used for?
The ABB PCBS2080 is a blind cell for segregation used within compatible ABB System pro E power low-voltage switchboard assemblies. It is specified for a nominal compartment height of 200 mm and width of 800 mm.
What are the dimensions of the ABB PCBS2080 blind cell?
The manufacturer designation specifies H=200MM W=800MM, identifying a nominal compatible height of 200 mm and width of 800 mm. The exact external dimensions of the supplied component should be confirmed using ABB technical drawings.
What is the ABB order code for the PCBS2080?
The ABB manufacturer order code is 1STQ008716A0000. The product type is PCBS2080, and its manufacturer designation is BLIND CELL FOR SEGR. H=200MM W=800MM.
How does the ABB PCBS2080 differ from the PCBS1540?
Both products are blind cells for segregation within the ABB System pro E power range. The PCBS2080, order code 1STQ008716A0000, is specified for a nominal height of 200 mm and width of 800 mm. The PCBS1540, order code 1STQ008705A0000, is specified for a nominal height of 150 mm and width of 400 mm. They are intended for different compartment dimensions and should not be treated as interchangeable.
Does the ABB PCBS2080 provide a specific IP rating or form of separation?
No independent IP rating or form of separation is established by the PCBS2080 alone. It is an internal mechanical segregation accessory; the final protection rating and form of separation depend on the complete switchboard configuration, associated components and verified assembly.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power segregation accessories support electrical engineers, contractors and switchboard manufacturers in constructing organised low-voltage distribution assemblies. The PCBS2080, order code 1STQ008716A0000, provides a dedicated blind-cell reference for compatible 200 mm high and 800 mm wide compartment configurations, supporting accurate component selection, procurement and professional switchboard assembly.
