Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008712A0000 ABB PCBS2560 System pro E Power Blind Cell for Segregation H250 W600
ABB PCBS2560 System pro E Power blind cell for internal switchgear segregation, designed for compatible low-voltage distribution board configurations with a nominal height of 250 mm and width of 600 mm.
£63.52
Why Choose the ABB PCBS2560 System pro E Power Blind Cell for Segregation?
The ABB PCBS2560 is a dedicated blind cell for segregation designed for compatible ABB System pro E Power low-voltage switchgear assemblies. Part of the ABB System pro E Power modular distribution system, this component supports the creation of defined internal compartments and the organisation of electrical distribution equipment within professional switchboard installations.
Specified for a 250 mm nominal cell height and 600 mm nominal cabinet width, the PCBS2560 provides a manufacturer-specific blind cell solution for compatible segregation arrangements. Its designation, BLIND CELL FOR SEGR. H=250MM W=600MM, identifies its intended application within internally segregated low-voltage distribution assemblies.
Designed for professional electrical panel builders and switchgear manufacturers, the ABB PCBS2560 supports modular compartment construction and integration with compatible System pro E Power enclosure structures and internal accessories. Identified by ABB manufacturer order code 1STQ008712A0000, it provides a dedicated component for industrial and commercial power distribution projects requiring the specified blind cell configuration.
Key Advantages
- Purpose-designed blind cell for segregation within ABB System pro E Power switchgear.
- Specified for a 250 mm nominal height and 600 mm nominal width.
- Supports the organisation and physical separation of internal switchgear compartments.
- Provides a dedicated component for compatible blanked or segregated cell arrangements.
- Integrates with the modular ABB System pro E Power low-voltage distribution platform.
- Helps electrical panel builders establish consistent internal compartment layouts.
- Supports professional switchboard assembly using manufacturer-specific components.
- Suitable for compatible industrial and commercial low-voltage distribution board installations.
Key Features
- ABB System pro E Power modular switchgear component.
- PCBS2560 manufacturer model designation.
- Blind cell configuration for internal segregation applications.
- 250 mm nominal cell height.
- 600 mm nominal cabinet width.
- Designed for compatible internal switchgear compartment arrangements.
- Supports modular low-voltage distribution board construction.
- Intended for integration with suitable ABB System pro E Power structural and segregation components.
- Manufacturer designation BLIND CELL FOR SEGR. H=250MM W=600MM.
- ABB order code 1STQ008712A0000.
Organised Internal Compartment Segregation for Low-Voltage Switchgear
Internal compartment segregation is an important consideration in the construction of low-voltage electrical distribution assemblies. Dedicated segregation components help establish defined boundaries between equipment areas, supporting organised switchboard layouts and the implementation of project-specific internal separation arrangements.
The ABB PCBS2560 provides a blind cell solution for compatible System pro E Power switchgear configurations. Its specified 250 mm nominal height and 600 mm nominal width allow panel builders to identify the appropriate component for a corresponding modular cabinet arrangement.
Blind cells can be used within suitable switchgear layouts to occupy or close designated compartment positions as part of an internal segregation design. The precise installation arrangement depends on the compatible ABB enclosure, partition system and assembly configuration.
ABB System pro E Power is a modular platform for constructing low-voltage distribution switchboards, incorporating cabinet structures, busbar systems, mounting accessories and internal segregation components. The PCBS2560 forms part of this component ecosystem, supporting the development of professionally configured distribution assemblies.
The PCBS2560 is a mechanical switchgear component rather than an electrical protection device. The final degree and form of internal separation, electrical performance and compliance with applicable standards, including IEC 61439 where relevant, depend on the complete assembly and its verified design. Selection and installation should follow ABB's applicable technical documentation.
Typical Applications
- ABB System pro E Power low-voltage distribution switchboards.
- Blind cell arrangements within internally segregated switchgear.
- Main electrical distribution board construction.
- Industrial low-voltage switchgear cabinets.
- Commercial building electrical distribution systems.
- Modular switchboard manufacturing and electrical panel-building projects.
- Internal compartment organisation and segregation arrangements.
- Compatible 250 mm high and 600 mm wide switchgear cell configurations.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ008712A0000 |
| Manufacturer designation | BLIND CELL FOR SEGR. H=250MM W=600MM |
| Product type | Blind cell for segregation |
| Nominal cell height | 250 mm |
| Nominal cabinet width | 600 mm |
| Configuration | Blind cell |
| Application | Internal switchgear compartment segregation |
| Installation arrangement | Compatible modular distribution board cell |
| Compatible system | ABB System pro E Power |
| Product group | System Pro E Power |
| Component classification | Low-voltage switchgear blind cell and segregation accessory |
Frequently Asked Questions
What is the ABB PCBS2560 used for?
The ABB PCBS2560 is a blind cell for segregation designed for compatible ABB System pro E Power low-voltage switchgear assemblies. It supports internal compartment organisation and specified segregation arrangements.
What are the specified dimensions of the ABB PCBS2560?
The PCBS2560 is specified for a 250 mm nominal cell height and 600 mm nominal cabinet width. These values identify the intended modular configuration rather than necessarily representing every external dimension of the supplied component.
What does blind cell for segregation mean?
A blind cell is a component intended for a designated switchgear compartment position without an active device opening in the specified arrangement. The ABB PCBS2560 is designed for compatible internal segregation configurations within System pro E Power assemblies.
Which ABB switchgear system is compatible with the PCBS2560?
The PCBS2560 belongs to the ABB System pro E Power modular low-voltage switchgear range. Its suitability for a particular cabinet or compartment arrangement should be confirmed against ABB's applicable assembly documentation.
What is the ABB manufacturer order code for the PCBS2560?
The ABB manufacturer order code is 1STQ008712A0000, corresponding to model PCBS2560 in the System pro E Power product range.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power provides modular components for professional low-voltage switchgear construction. The PCBS2560 blind cell supports compatible internal segregation arrangements with a specified 250 mm nominal cell height and 600 mm nominal cabinet width, helping panel builders develop organised distribution board assemblies.
