Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008704A0000 ABB PCBS1040 Blind Cell for Segregation H100 W400 mm System pro E power
ABB PCBS1040 (1STQ008704A0000) is a blind cell for segregation within compatible System pro E power low-voltage switchboards, specified for a nominal compartment height of 100 mm and width of 400 mm.
£52.06
Why Choose the ABB PCBS1040 Blind Cell for Segregation?
The ABB PCBS1040, manufacturer order code 1STQ008704A0000, is a dedicated blind cell for segregation within the ABB System pro E power low-voltage switchboard range. Identified by the manufacturer's designation BLIND CELL FOR SEGR. H=100MM W=400MM, this accessory is specified for a nominal compartment height of 100 mm and width of 400 mm.
Designed for compatible modular switchboard configurations, the PCBS1040 provides a blind-cell component for internal segregation arrangements. Its defined height and width make it relevant to panel builders planning compartment layouts and selecting appropriately sized accessories for ABB System pro E power electrical distribution assemblies.
The ABB PCBS1040 blind segregation cell is particularly suitable for consideration in professional switchboard construction, refurbishment and maintenance projects requiring a manufacturer-specific blind-cell accessory. Correct selection depends on the intended compartment arrangement, associated segregation components and applicable ABB assembly instructions.
Key Advantages
- Dedicated blind cell for segregation within the ABB System pro E power range.
- Specified for a nominal compartment height of 100 mm.
- Designed for a nominal compartment width of 400 mm.
- Supports structured internal segregation layouts in compatible switchboard assemblies.
- Provides a manufacturer-specific component for the intended compartment configuration.
- Helps panel builders identify the correct blind-cell size during assembly planning.
- Supports consistent construction using compatible ABB System pro E power accessories.
- Provides a clear manufacturer reference for maintenance and replacement procurement.
- Relevant to industrial and commercial low-voltage distribution installations.
- Can be incorporated into project specifications and switchboard bills of materials.
Key Features
- ABB PCBS1040 manufacturer type designation.
- 1STQ008704A0000 ABB manufacturer order code.
- System pro E power product group.
- Blind cell component configuration.
- Specifically designated for segregation.
- 100 mm nominal compatible compartment height.
- 400 mm nominal compatible compartment width.
- Intended for compatible low-voltage switchboard assemblies.
- Supports the mechanical arrangement of internal segregation components.
- Designed for selection according to the applicable ABB compartment configuration.
- Exact material, finish and mounting hardware are not established by the supplied designation.
- Functions as an internal mechanical switchboard accessory, not as an electrical switching or circuit-protection device.
100 mm × 400 mm Blind Cell for ABB Switchboard Segregation
Low-voltage electrical switchboards often incorporate internal compartment arrangements to organise equipment, busbar systems, cable connections and associated structural components. Depending on the design, segregation accessories can help define boundaries between functional spaces and complete designated areas within the assembly. The ABB PCBS1040 is specifically identified as a blind cell for segregation within the System pro E power range.
The manufacturer's designation BLIND CELL FOR SEGR. H=100MM W=400MM establishes the component's intended segregation application and its nominal 100 mm height and 400 mm width. These dimensions are important when selecting accessories for a particular switchboard compartment. They should not automatically be interpreted as the precise external measurements of the supplied component, which must be checked against ABB technical drawings.
The term blind cell identifies the product as a component intended for a blind-cell arrangement rather than an active electrical device. However, the supplied designation does not establish the exact panel profile, whether it incorporates particular openings or fixings, or which adjacent components are required. Panel builders should verify the installation arrangement before treating the PCBS1040 as interchangeable with other compartment covers or segregation accessories.
Correct integration depends on the complete ABB System pro E power switchboard structure. The PCBS1040 alone does not establish a particular form of separation, ingress protection rating or electrical performance classification. Such characteristics depend on the complete assembly, the associated barriers and covers, and the applicable design verification requirements.
Typical Applications
- ABB System pro E power low-voltage switchboard assemblies.
- Blind-cell arrangements within internal switchboard segregation systems.
- Nominal 100 mm high compartment configurations.
- Nominal 400 mm wide compartment configurations.
- Professional electrical panel manufacturing and assembly.
- Industrial electrical power distribution installations.
- Commercial building main distribution board projects.
- Replacement and procurement of matching ABB blind-cell segregation accessories.
Technical Specifications
| Product group | System pro E power |
|---|---|
| Model / type | PCBS1040 |
| ABB order code | 1STQ008704A0000 |
| Manufacturer designation | BLIND CELL FOR SEGR. H=100MM W=400MM |
| Product type | Blind cell for segregation |
| Component category | Internal switchboard segregation accessory |
| Nominal compatible compartment height | 100 mm |
| Nominal compatible compartment width | 400 mm |
| Segregation application | Internal switchboard compartment arrangement |
| Fixing hardware | Inclusion not confirmed by the supplied designation |
| Compatible switchboard system | ABB System pro E power |
| Primary application | Blind-cell provision within a compatible switchboard segregation arrangement |
Frequently Asked Questions
What is the ABB PCBS1040 used for?
The ABB PCBS1040 is a blind cell for segregation used within compatible ABB System pro E power low-voltage switchboard assemblies. It is specified for a nominal compartment height of 100 mm and width of 400 mm.
What are the dimensions of the ABB PCBS1040 blind cell?
The manufacturer designation specifies H=100MM W=400MM, identifying a nominal compatible height of 100 mm and width of 400 mm. The exact external dimensions of the supplied component should be confirmed using ABB technical drawings.
What is the ABB order code for the PCBS1040?
The ABB manufacturer order code is 1STQ008704A0000. The product type is PCBS1040, and its manufacturer designation is BLIND CELL FOR SEGR. H=100MM W=400MM.
Is the ABB PCBS1040 the same as a standard switchboard cover?
Not necessarily. The PCBS1040 is specifically designated as a blind cell for segregation. Its exact mounting arrangement and compatibility with other covers or compartment components are not established by the supplied specification. It should not be substituted for a different accessory without checking ABB documentation.
Does the ABB PCBS1040 provide a specific IP rating or form of separation?
No independent IP rating or form of separation is established by the PCBS1040 alone. It is an internal mechanical segregation accessory; the final protection rating and form of separation depend on the complete switchboard configuration, associated components and verified assembly.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power segregation accessories support electrical engineers, contractors and switchboard manufacturers in constructing organised low-voltage distribution assemblies. The PCBS1040, order code 1STQ008704A0000, provides a dedicated blind-cell reference for compatible 100 mm high and 400 mm wide compartment configurations, supporting accurate component selection and professional switchboard assembly.
