Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008575A0000 ABB PTHS2092 System pro E Power Horizontal Rear Busbar Segregation Component 200 x 900 mm
ABB PTHS2092 (1STQ008575A0000) is a System pro E Power horizontal rear busbar segregation component designed for 200 mm wide and 900 mm deep low-voltage switchboard structures incorporating an intermediate upright.
£86.08
Why Choose the ABB PTHS2092 System pro E Power Horizontal Rear Busbar Segregation Kit?
The ABB PTHS2092 (1STQ008575A0000) is a dedicated horizontal rear busbar segregation component designed for ABB System pro E Power low-voltage electrical distribution switchboards. Specifically intended for structures incorporating an intermediate upright, this accessory supports physical separation of rear horizontal busbar areas within compatible modular switchboard assemblies.
Designed for 200 mm wide switchboard structures with a nominal depth of 900 mm, the PTHS2092 provides a configuration-specific solution for organising internal busbar compartments. Its horizontal rear arrangement helps electrical panel builders establish defined physical boundaries between selected busbar routing areas and adjacent switchboard sections.
The manufacturer's designation, SEG.BUS.HOR.REAR+INT.UP. W200 FOR D900, identifies the rear horizontal busbar segregation arrangement, intermediate upright configuration and applicable switchboard dimensions. As part of the ABB System pro E Power accessory range, the PTHS2092 is intended for coordinated installation with compatible structural and segregation components.
Key Advantages
- Dedicated horizontal rear busbar segregation accessory for ABB System pro E Power switchboards.
- Designed for 200 mm wide and 900 mm deep switchboard structures.
- Specifically intended for configurations with an intermediate upright.
- Supports physical separation of rear horizontal busbar compartments.
- Helps establish organised internal busbar routing and equipment areas.
- Facilitates coordinated construction of modular low-voltage switchboards.
- Provides a manufacturer-specific component for accurate accessory selection.
- Suitable for professional electrical panel building and switchboard manufacturing.
Key Features
- ABB System pro E Power segregation accessory.
- Manufacturer model: PTHS2092.
- ABB order code: 1STQ008575A0000.
- Horizontal rear busbar segregation configuration.
- 200 mm nominal switchboard width.
- 900 mm nominal switchboard depth.
- Designed for structures with an intermediate upright.
- Intended for rear busbar compartment separation.
- Supports internal physical segregation within modular switchboards.
- Designed for integration with compatible ABB System pro E Power structural and partition components.
Horizontal Rear Busbar Segregation for Modular Distribution Switchboards
The ABB PTHS2092 is intended to support horizontal physical separation around rear busbar areas within compatible System pro E Power switchboard structures. Internal segregation components help establish compartment boundaries around selected electrical distribution areas, contributing to organised equipment layouts and coordinated modular switchboard construction.
Its 200 mm width and 900 mm depth compatibility makes the PTHS2092 suitable for matching switchboard structures incorporating an intermediate upright. Correct installation requires the appropriate ABB enclosure framework and complementary segregation components. The PTHS2092 is a mechanical segregation accessory rather than an electrical protective device, and the final form of internal separation depends on the complete switchboard assembly and applicable verification requirements.
Typical Applications
- ABB System pro E Power low-voltage distribution switchboards.
- Horizontal rear busbar compartment segregation.
- Main electrical distribution boards.
- Industrial electrical switchgear assemblies.
- Commercial building power distribution systems.
- Switchboard structures incorporating intermediate uprights.
- 200 mm wide and 900 mm deep modular switchboard configurations.
- Physical separation of rear busbar areas and adjacent equipment compartments.
- Professional electrical panel building and switchboard manufacturing.
Technical Specifications
| Product series | System pro E Power |
|---|---|
| Product SKU | 1STQ008575A0000 |
| ABB order code | 1STQ008575A0000 |
| Product group | System Pro E Power |
| Manufacturer designation | SEG.BUS.HOR.REAR+INT.UP. W200 FOR D900 |
| Product type | Horizontal rear busbar segregation component |
| Accessory category | Switchboard segregation and partition accessories |
| Nominal switchboard width | 200 mm |
| Nominal switchboard depth | 900 mm |
| Segregation orientation | Horizontal |
| Segregation position | Rear |
| Busbar arrangement | Horizontal rear busbar system |
| Structural configuration | With intermediate upright |
| Compatible switchboard system | ABB System pro E Power |
| Application | Internal horizontal rear busbar segregation in low-voltage switchboards |
Frequently Asked Questions
What is the ABB PTHS2092 used for?
The ABB PTHS2092 is a horizontal rear busbar segregation component designed to provide physical separation around rear busbar areas within compatible ABB System pro E Power low-voltage switchboards.
What switchboard dimensions is the PTHS2092 designed for?
The PTHS2092 is designed for 200 mm wide and 900 mm deep ABB System pro E Power switchboard structures. These are nominal switchboard dimensions rather than confirmed overall component dimensions.
Does the ABB PTHS2092 require an intermediate upright?
The PTHS2092 is specifically intended for switchboard configurations with an intermediate upright, as indicated by the manufacturer's +INT.UP. designation.
Does the PTHS2092 provide front or rear busbar segregation?
The PTHS2092 is designed for rear horizontal busbar segregation. Front segregation arrangements require the appropriate accessories for the intended switchboard configuration.
Is the PTHS2092 a horizontal or vertical segregation component?
The PTHS2092 is a horizontal segregation component intended for rear busbar compartments. Vertical segregation applications require appropriately specified accessories.
What is the difference between ABB PTHS2072 and PTHS2092?
Both products are horizontal rear busbar segregation components designed for 200 mm wide switchboard structures with an intermediate upright. The PTHS2072 is specified for a nominal depth of 700 mm, whereas the PTHS2092 is specified for a nominal depth of 900 mm.
Does the PTHS2092 provide electrical circuit protection?
No. The PTHS2092 is a mechanical segregation accessory and does not independently provide overload or short-circuit protection.
Can the PTHS2092 independently establish a specific form of internal separation?
No. The achieved form of internal separation depends on the complete switchboard assembly, including structural components, complementary partitions, equipment layout and applicable verification requirements.
Trusted by Electrical Panel Builders and Power Distribution Engineers
ABB System pro E Power segregation accessories support professional electrical panel builders, switchboard manufacturers and power distribution engineers in developing organised modular low-voltage assemblies. The PTHS2092 provides a dedicated horizontal rear busbar segregation solution for 200 mm wide and 900 mm deep switchboard structures incorporating an intermediate upright.
