Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008567A0000 ABB PTHS2070 System pro E Power Horizontal Busbar Segregation Component 200 x 700 mm
ABB PTHS2070 (1STQ008567A0000) is a System pro E Power horizontal busbar segregation component with +D manufacturer designation, designed for 200 mm wide and 700 mm deep low-voltage switchboard structures without intermediate uprights.
£93.58
Why Choose the ABB PTHS2070 System pro E Power Horizontal Busbar Segregation Kit?
The ABB PTHS2070 (1STQ008567A0000) is a dedicated horizontal busbar segregation accessory designed for ABB System pro E Power low-voltage electrical distribution switchboards. Intended for structures without an intermediate upright, this component supports physical separation of busbar areas within compatible modular switchboard assemblies.
Designed for 200 mm wide and 700 mm deep switchboard structures, the PTHS2070 provides a configuration-specific solution for organising internal busbar compartments. Its horizontal arrangement helps electrical panel builders establish defined boundaries between selected busbar areas and adjacent sections of the switchboard.
The manufacturer's designation, SEG.BUS.HOR. NO INT.UP.+D W200 D700, identifies the horizontal busbar segregation arrangement, absence of an intermediate upright and applicable switchboard dimensions. The additional +D designation is retained as specified by ABB and should be interpreted using the relevant manufacturer's assembly documentation.
Key Advantages
- Dedicated horizontal busbar segregation component for ABB System pro E Power switchboards.
- Designed for 200 mm wide and 700 mm deep switchboard structures.
- Specifically intended for configurations without an intermediate upright.
- Supports physical separation of selected internal busbar areas.
- Helps establish organised compartment layouts within electrical distribution assemblies.
- Facilitates coordinated construction of modular low-voltage switchboards.
- Provides a manufacturer-specific accessory for accurate component selection.
- Suitable for professional electrical panel building and switchboard manufacturing.
Key Features
- ABB System pro E Power segregation accessory.
- Manufacturer model: PTHS2070.
- ABB order code: 1STQ008567A0000.
- Horizontal busbar segregation configuration.
- 200 mm nominal switchboard width.
- 700 mm nominal switchboard depth.
- Designed for structures without an intermediate upright.
- Manufacturer configuration designation includes +D.
- Supports internal physical separation within modular electrical switchboards.
- Intended for integration with compatible ABB System pro E Power structural components.
Horizontal Busbar Segregation for Modular Distribution Switchboards
The ABB PTHS2070 is intended to support horizontal physical separation within compatible System pro E Power switchboard structures. Segregation accessories help establish boundaries around selected busbar areas, contributing to organised electrical distribution layouts and defined internal compartments.
Its 200 mm width and 700 mm depth compatibility makes the PTHS2070 suitable for matching switchboard structures without intermediate uprights. Correct installation requires the appropriate ABB enclosure framework and complementary segregation components. The PTHS2070 is a mechanical accessory rather than an electrical protective device, and the final form of internal separation depends on the complete switchboard assembly and applicable verification requirements.
Typical Applications
- ABB System pro E Power low-voltage distribution switchboards.
- Horizontal busbar segregation arrangements.
- Main electrical distribution boards.
- Industrial electrical switchgear assemblies.
- Commercial building power distribution systems.
- Switchboard structures without intermediate uprights.
- 200 mm wide and 700 mm deep modular switchboard configurations.
- Physical separation of internal busbar areas and adjacent compartments.
- Professional electrical panel building and switchboard manufacturing.
Technical Specifications
| Product series | System pro E Power |
|---|---|
| Product SKU | 1STQ008567A0000 |
| ABB order code | 1STQ008567A0000 |
| Product group | System Pro E Power |
| Manufacturer designation | SEG.BUS.HOR. NO INT.UP.+D W200 D700 |
| Product type | Horizontal busbar segregation component |
| Accessory category | Switchboard segregation and partition accessories |
| Nominal switchboard width | 200 mm |
| Nominal switchboard depth | 700 mm |
| Segregation orientation | Horizontal |
| Structural configuration | Without intermediate upright |
| Additional manufacturer designation | +D |
| Compatible switchboard system | ABB System pro E Power |
| Application | Internal horizontal busbar segregation in low-voltage switchboards |
Frequently Asked Questions
What is the ABB PTHS2070 used for?
The ABB PTHS2070 is a horizontal busbar segregation component designed to provide physical separation within compatible ABB System pro E Power low-voltage switchboards.
What switchboard dimensions is the PTHS2070 designed for?
The PTHS2070 is designed for 200 mm wide and 700 mm deep ABB System pro E Power switchboard structures. These are nominal switchboard dimensions rather than confirmed overall component dimensions.
Does the ABB PTHS2070 require an intermediate upright?
No. The manufacturer's designation specifies NO INT.UP., identifying the PTHS2070 as intended for structures without an intermediate upright.
Is the PTHS2070 a horizontal or vertical segregation component?
The PTHS2070 is a horizontal busbar segregation component. Vertical segregation applications require appropriately specified accessories.
What does the +D designation mean on the PTHS2070?
The manufacturer's description includes +D as part of the product configuration. Its precise technical meaning should be confirmed against ABB documentation for order code 1STQ008567A0000.
Does the PTHS2070 provide electrical circuit protection?
No. The PTHS2070 is a mechanical segregation accessory and does not independently provide overload or short-circuit protection.
Is the ABB PTHS2070 compatible with System pro E Power switchboards?
Yes. The PTHS2070 (1STQ008567A0000) belongs to the ABB System pro E Power range and is intended for compatible modular low-voltage switchboard structures.
Can the PTHS2070 independently establish a specific form of internal separation?
No. The achieved form of internal separation depends on the complete switchboard assembly, including its structural components, complementary partitions, equipment layout and applicable verification requirements.
Trusted by Electrical Panel Builders and Power Distribution Engineers
ABB System pro E Power segregation accessories support professional electrical panel builders, switchboard manufacturers and power distribution engineers in developing organised modular low-voltage assemblies. The PTHS2070 provides a dedicated horizontal busbar segregation solution for 200 mm wide and 700 mm deep switchboard structures without intermediate uprights.
