Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008566A0000 ABB PTHS2050 System pro E Power Horizontal Busbar Segregation Component 200 x 500 mm
ABB PTHS2050 (1STQ008566A0000) is a System pro E Power horizontal busbar segregation component with +D manufacturer designation, intended for 200 mm wide and 500 mm deep low-voltage switchboard structures without intermediate uprights.
£87.87
Why Choose the ABB PTHS2050 System pro E Power Horizontal Busbar Segregation Kit?
The ABB PTHS2050 (1STQ008566A0000) is a dedicated horizontal busbar segregation component designed for ABB System pro E Power low-voltage electrical distribution switchboards. Specifically intended for structures without intermediate uprights, this accessory supports the physical separation of busbar areas within compatible modular switchboard assemblies.
Designed for 200 mm wide and 500 mm deep switchboard structures, the PTHS2050 provides a practical solution for organising internal electrical distribution compartments. Its horizontal segregation arrangement helps electrical panel builders establish defined physical boundaries between selected busbar areas and adjacent switchboard sections.
The PTHS2050 belongs to the ABB System pro E Power accessory range and is identified by the manufacturer designation SEG.BUS.HOR. NO INT.UP.+D W200 D500. This identifies a horizontal busbar segregation arrangement without an intermediate upright, with an additional configuration indicated by the manufacturer's +D designation. The precise meaning of this suffix should be confirmed against the relevant ABB assembly documentation.
Key Advantages
- Dedicated horizontal busbar segregation accessory for ABB System pro E Power switchboards.
- Designed for 200 mm wide and 500 mm deep switchboard structures.
- Specifically intended for configurations without intermediate uprights.
- Supports physical separation between selected internal busbar and equipment areas.
- Helps establish organised switchboard compartment layouts.
- Facilitates coordinated construction of modular low-voltage distribution assemblies.
- Provides a manufacturer-specific component for accurate switchboard specification.
- Suitable for professional electrical panel building and industrial distribution applications.
Key Features
- ABB System pro E Power switchboard accessory.
- Manufacturer model: PTHS2050.
- ABB order code: 1STQ008566A0000.
- Horizontal busbar segregation configuration.
- 200 mm nominal switchboard width.
- 500 mm nominal switchboard depth.
- Designed for structures without intermediate uprights.
- Manufacturer configuration designation includes +D.
- Supports internal physical separation within modular electrical switchboards.
- Intended for integration with compatible ABB System pro E Power structural components.
- Suitable for professional switchboard manufacturing and assembly.
Horizontal Busbar Segregation for Compact Distribution Compartments
The ABB PTHS2050 is intended to support horizontal physical separation within compatible System pro E Power switchboard structures. Segregation components form part of the internal arrangement of electrical distribution assemblies, helping panel builders define compartment boundaries around busbar systems and associated electrical equipment.
Its 200 mm width and 500 mm depth compatibility makes the PTHS2050 suitable for matching switchboard configurations without intermediate uprights. The component should be installed in accordance with the relevant ABB technical documentation and used alongside the appropriate enclosure framework and complementary segregation accessories.
The PTHS2050 is a mechanical segregation component, not an electrical protective device. The achieved form of internal separation, degree of protection and overall electrical safety performance depend on the complete switchboard design, equipment arrangement and applicable assembly verification.
Typical Applications
- ABB System pro E Power low-voltage distribution switchboards.
- Horizontal busbar segregation arrangements.
- Main electrical distribution boards.
- Industrial electrical switchgear assemblies.
- Commercial building power distribution systems.
- Switchboard structures without intermediate uprights.
- 200 mm wide and 500 mm deep modular distribution compartments.
- Internal separation of busbar areas and adjacent switchboard sections.
- Professional electrical panel building and switchboard manufacturing.
Technical Specifications
| Product series | System pro E Power |
|---|---|
| Product SKU | 1STQ008566A0000 |
| ABB order code | 1STQ008566A0000 |
| Product group | System Pro E Power |
| Manufacturer designation | SEG.BUS.HOR. NO INT.UP.+D W200 D500 |
| Product type | Horizontal busbar segregation component |
| Accessory category | Switchboard segregation and partition accessories |
| Nominal switchboard width | 200 mm |
| Nominal switchboard depth | 500 mm |
| Segregation orientation | Horizontal |
| Structural configuration | Without intermediate upright |
| Additional manufacturer designation | +D |
| Compatible switchboard system | ABB System pro E Power |
| Application | Internal horizontal busbar segregation in low-voltage switchboards |
Frequently Asked Questions
What is the ABB PTHS2050 used for?
The ABB PTHS2050 is a horizontal busbar segregation component designed to provide physical separation within compatible ABB System pro E Power low-voltage switchboards.
What switchboard dimensions is the PTHS2050 designed for?
The PTHS2050 is designed for 200 mm wide and 500 mm deep ABB System pro E Power switchboard structures. These are nominal structure dimensions rather than confirmed overall component dimensions.
Does the ABB PTHS2050 require an intermediate upright?
No. The manufacturer's designation specifies NO INT.UP., identifying the PTHS2050 as a component intended for switchboard structures without intermediate uprights.
Is the PTHS2050 a horizontal or vertical segregation component?
The PTHS2050 is a horizontal busbar segregation component. Vertical segregation applications require appropriately specified components.
What does the +D designation mean on the PTHS2050?
The manufacturer's description includes +D as part of the product configuration. Its precise technical meaning should be checked against ABB's documentation for order code 1STQ008566A0000 rather than assumed.
Does the PTHS2050 provide overload or short-circuit protection?
No. The PTHS2050 is a mechanical segregation accessory and does not independently provide overload or short-circuit protection. Appropriate electrical protective devices must be selected separately.
Is the ABB PTHS2050 compatible with System pro E Power switchboards?
Yes. The PTHS2050 (1STQ008566A0000) belongs to the ABB System pro E Power product group and is intended for compatible modular low-voltage switchboard structures.
Can the PTHS2050 independently establish a specific form of internal separation?
No. The final form of internal separation depends on the complete switchboard assembly, including structural components, complementary partitions, equipment positioning and applicable verification requirements.
For Professional Electrical Panel Builders and Power Distribution Engineers
ABB System pro E Power segregation accessories are designed to support professional electrical panel builders, switchboard manufacturers and industrial power distribution engineers in constructing organised modular low-voltage assemblies. The PTHS2050 provides a dedicated horizontal busbar segregation component for 200 mm wide and 500 mm deep switchboard structures without intermediate uprights.
