Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTHS2030 1STQ008565A0000 System Pro E Power horizontal busbar segregation component for compatible low-voltage switchgear cabinet arrangements with a nominal width of 200 mm and depth of 300 mm, designated NO INT.UP.+D. Verify the additional configuration reference and installation requirements against ABB documentation.
£85.78
The ABB PTHS2030 1STQ008565A0000 is a dedicated horizontal busbar segregation component designed for integration into compatible ABB System Pro E Power low-voltage switchgear and electrical distribution cabinets. Part of the ABB System Pro E Power range, this accessory is identified by the manufacturer's designation SEG.BUS.HOR. NO INT.UP.+D W200 D300, specifying a horizontal busbar segregation arrangement for a designated cabinet configuration.
Developed for professional electrical panel builders, switchgear manufacturers and industrial electrical contractors, the PTHS2030 supports organised internal separation of designated busbar areas within modular switchboards. Its horizontal segregation configuration is intended to help establish defined boundaries between busbar spaces and adjacent functional areas, supporting structured equipment layouts and the coordinated integration of compatible electrical distribution components.
Specified for a 200 mm nominal cabinet width and 300 mm nominal cabinet depth, the ABB PTHS2030 is intended for corresponding System Pro E Power enclosure arrangements. The manufacturer's NO INT.UP. reference indicates a configuration without an intermediate upright, while the additional +D notation is retained exactly as specified by ABB. Its precise meaning and associated installation requirements should be confirmed against the relevant ABB System Pro E Power technical documentation.
The ABB System Pro E Power range provides a modular enclosure platform for constructing low-voltage electrical distribution and switchgear assemblies. Its dedicated busbar segregation accessories enable electrical panel builders to organise designated busbar spaces in relation to equipment compartments, cable connection areas and other functional sections. Where required by the approved switchboard design, horizontal segregation components can contribute to the physical separation of busbar areas and support coordinated internal cabinet layouts.
The ABB PTHS2030 is specifically designated for horizontal busbar segregation in compatible cabinet configurations with a nominal width of 200 mm and depth of 300 mm. The NO INT.UP.+D reference distinguishes its intended arrangement from other System Pro E Power segregation configurations. Although NO INT.UP. indicates the absence of an intermediate upright, the precise significance of +D requires confirmation using ABB's assembly drawings. Correct installation also depends on compatible structural components, mounting accessories, busbar clearances and adjacent segregation elements. This accessory alone does not establish a particular IEC 61439 form of separation, provide a standalone electrical insulation rating or determine the ingress protection rating of the completed switchgear assembly.
| Product group | System Pro E Power |
|---|---|
| Model / type | PTHS2030 |
| ABB order code | 1STQ008565A0000 |
| Manufacturer designation | SEG.BUS.HOR. NO INT.UP.+D W200 D300 |
| Product type | Horizontal busbar segregation component |
| Segregation application | Busbar area |
| Segregation orientation | Horizontal |
| Intermediate upright reference | NO INT.UP. |
| Intermediate upright arrangement | Without intermediate upright, subject to ABB assembly documentation |
| Additional configuration reference | +D |
| Meaning of +D | Not defined in the supplied specification; verify against ABB documentation |
| Nominal cabinet width | 200 mm |
| Nominal cabinet depth | 300 mm |
| Installation system | ABB System Pro E Power |
| Application | Internal busbar segregation in low-voltage switchgear assemblies |
| Product category | Busbar segregation panels and switchgear enclosure accessories |
| Compatibility | Appropriate ABB System Pro E Power cabinet configurations |
| Assembly verification | Dependent on the completed switchgear design and installation |
The ABB PTHS2030 is a horizontal busbar segregation component designed for internal separation of designated busbar areas within compatible ABB System Pro E Power low-voltage switchgear cabinets. It is specified for the manufacturer's NO INT.UP.+D configuration.
The manufacturer's designation specifies a 200 mm nominal cabinet width and 300 mm nominal cabinet depth. These values identify the intended cabinet configuration rather than a complete set of measured physical component dimensions.
SEG.BUS.HOR. identifies a horizontal busbar segregation arrangement. The PTHS2030 is intended for compatible System Pro E Power assemblies where horizontal separation of a designated busbar area is required by the switchgear design.
NO INT.UP. indicates a configuration without an intermediate upright. The additional +D notation is part of ABB's manufacturer designation, but its exact meaning is not established by the supplied specification. The complete configuration and mounting requirements should be verified against the relevant ABB System Pro E Power documentation.
The ABB PTHS2030 is a busbar segregation accessory, but a specified form of internal separation depends on the design and verification of the complete switchgear assembly. Compatible barriers, partitions, mounting components and other enclosure accessories must be selected and installed in accordance with the applicable ABB documentation and assembly requirements.
ABB System Pro E Power segregation accessories support the construction of organised, configurable and dependable low-voltage switchgear assemblies. The PTHS2030 horizontal busbar segregation component provides a dedicated internal separation solution for compatible 200 mm wide and 300 mm deep cabinet arrangements identified by the manufacturer's NO INT.UP.+D configuration, helping professional electrical panel builders implement structured busbar compartment layouts.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.