Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ008562B0000 is a System pro E power horizontal fixed installation kit for two compatible ABB XT5 moulded case circuit breaker positions in a nominal 600 x 800 mm configuration, supporting 3-pole and 4-pole arrangements.
£305.24
The ABB 1STQ008562B0000 is a purpose-designed horizontal circuit breaker installation kit for the ABB System pro E power low-voltage switchboard range. Identified by ABB as KIT N.2 XT5 HOR.F-I 600X800 3/4P, this accessory is intended for the horizontal integration of compatible ABB XT5 moulded case circuit breakers within modular electrical distribution assemblies.
Developed for professional switchboard builders, electrical panel manufacturers and industrial power distribution applications, the kit supports the installation of two ABB XT5 circuit breaker positions in a horizontal arrangement. The manufacturer's F-I designation identifies the fixed installation configuration, while the 3/4P designation specifies compatibility with appropriate three-pole and four-pole XT5 circuit breaker versions.
Specified for a 600 × 800 mm nominal installation configuration, the ABB 1STQ008562B0000 enables structured circuit breaker integration within compatible System pro E power switchboard assemblies. Its manufacturer-specific design helps panel builders achieve consistent equipment layouts and simplify the selection of compatible installation accessories.
Moulded case circuit breakers are widely used in low-voltage electrical distribution systems to provide protection against overloads and short circuits, depending on their selected trip units and electrical ratings. Correct mechanical installation and integration into a suitable switchboard assembly are essential for dependable operation and appropriate access to electrical equipment.
The ABB 1STQ008562B0000 is designed to support the horizontal installation of compatible ABB XT5 circuit breakers within the System pro E power modular switchboard platform. Its N.2 designation identifies a two-position arrangement, while the 3/4P specification indicates compatibility with the designated three-pole and four-pole circuit breaker configurations. The 600 × 800 mm designation identifies the nominal installation configuration rather than the verified overall physical dimensions of the individual kit components.
The installation kit is a mechanical switchboard accessory and does not independently determine the electrical ratings or protection characteristics of the completed assembly. Circuit breaker rated current, breaking capacity, operating characteristics and compliance with applicable requirements depend on the selected XT5 devices and the complete switchboard design. The finished assembly must be engineered and verified in accordance with applicable standards, including the IEC/EN 61439 series, using the manufacturer's approved installation instructions.
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ008562B0000 |
| Product type | Horizontal circuit breaker installation kit |
| Manufacturer description | KIT N.2 XT5 HOR.F-I 600X800 3/4P |
| Compatible circuit breaker family | ABB XT5 |
| Circuit breaker type | Moulded case circuit breaker (MCCB) |
| Installation orientation | Horizontal |
| Installation configuration | Fixed (F-I) |
| Number of circuit breaker positions | 2 |
| Supported pole configurations | 3-pole / 4-pole |
| Nominal installation configuration | 600 × 800 mm |
| Application | Low-voltage switchboard circuit breaker installation |
| Installation location | Compatible ABB System pro E power switchboard assemblies |
| System compatibility | ABB System pro E power with matching XT5 horizontal fixed installation arrangement |
The ABB 1STQ008562B0000 is a horizontal XT5 circuit breaker installation kit designed for compatible ABB System pro E power low-voltage switchboards. It supports the installation of two compatible XT5 circuit breaker positions in the specified horizontal fixed arrangement.
The kit is designed for the ABB XT5 moulded case circuit breaker family, with compatible three-pole and four-pole configurations. The exact circuit breaker version and associated mounting components must match the manufacturer's installation requirements.
The manufacturer's N.2 XT5 designation identifies an arrangement for two XT5 circuit breaker positions. Installation must follow the approved ABB System pro E power assembly configuration.
Yes. The manufacturer's 3/4P designation identifies compatibility with appropriate 3-pole and 4-pole ABB XT5 circuit breakers, subject to the selected breaker execution and installation requirements.
The 600 × 800 mm designation identifies the nominal installation configuration specified by ABB. It should not be interpreted as the confirmed physical dimensions of every individual component supplied with the kit.
ABB System pro E power is a modular low-voltage switchboard platform developed for professional electrical power distribution assemblies. The ABB 1STQ008562B0000 provides a dedicated horizontal fixed installation solution for two compatible XT5 circuit breaker positions in a 600 × 800 mm configuration, supporting organised equipment layouts and consistent switchboard construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.