Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTHS3072 (1STQ008556A0000) is a System pro E Power horizontal rear busbar segregation kit designed for 300 mm wide and 700 mm deep low-voltage switchboard structures incorporating an intermediate upright.
£91.69
The ABB PTHS3072 (1STQ008556A0000) is a dedicated horizontal rear busbar segregation kit designed for ABB System pro E Power low-voltage electrical distribution switchboards. Specifically intended for structures incorporating an intermediate upright, this accessory supports physical separation of rear horizontal busbar areas within modular switchboard assemblies.
Designed for 300 mm wide switchboard structures with a nominal depth of 700 mm, the PTHS3072 provides a practical solution for organising internal busbar compartments. Its horizontal rear segregation configuration helps electrical panel builders establish defined boundaries between busbar routing areas and adjacent electrical equipment compartments.
As part of the ABB System pro E Power modular switchboard range, the PTHS3072 is intended for installations with an intermediate upright. It supports coordinated switchboard construction using compatible ABB structural, mounting and segregation components, making it suitable for professional industrial and commercial power distribution assemblies.
The ABB PTHS3072 provides a dedicated segregation arrangement for horizontally routed rear busbars within compatible System pro E Power switchboards. Internal segregation components help establish physical boundaries between selected electrical distribution areas, supporting organised equipment layouts and defined busbar compartments. The PTHS3072 is specifically designed for structures incorporating an intermediate upright.
Its 300 mm width and 700 mm depth compatibility make the PTHS3072 suitable for matching modular switchboard structures. When installed with the appropriate ABB enclosure framework, mounting accessories and complementary segregation components, it contributes to a coordinated internal separation arrangement. The kit is a mechanical segregation accessory rather than an independent electrical protective device, and the final form of internal separation depends on the complete switchboard design and applicable assembly verification requirements.
| Series | System pro E Power |
|---|---|
| Product SKU | 1STQ008556A0000 |
| ABB order code | 1STQ008556A0000 |
| Product group | System Pro E Power |
| Product type | Horizontal rear busbar segregation kit |
| Accessory category | Switchboard segregation and partition accessories |
| Nominal switchboard width | 300 mm |
| Nominal switchboard depth | 700 mm |
| Installation orientation | Horizontal |
| Segregation position | Rear |
| Busbar arrangement | Horizontal rear busbar system |
| Structural configuration | With intermediate upright |
| Compatible enclosure system | ABB System pro E Power |
| Application | Internal horizontal rear busbar segregation in low-voltage switchboards |
The ABB PTHS3072 is a horizontal rear busbar segregation kit designed to provide physical separation around rear busbar areas within compatible ABB System pro E Power low-voltage switchboards.
The PTHS3072 is designed for 300 mm wide and 700 mm deep ABB System pro E Power switchboard structures.
Yes. The PTHS3072 is specifically intended for switchboard structures incorporating an intermediate upright.
The PTHS3072 is designed for horizontal rear busbar segregation. Front segregation arrangements require the appropriate accessories for the intended switchboard configuration.
The PTHS3072 is a horizontal segregation kit intended for rear busbar compartments within compatible System pro E Power assemblies.
No. The PTHS3072 is a mechanical segregation accessory and does not independently provide overload or short-circuit protection. Electrical protection requires appropriately selected circuit breakers or other protective devices.
Yes. The PTHS3072 (1STQ008556A0000) belongs to the ABB System pro E Power range and is designed for compatible modular low-voltage distribution switchboard structures.
No. The final form of internal separation depends on the complete switchboard assembly, including structural components, complementary partitions, equipment layout and applicable verification requirements.
ABB System pro E Power segregation accessories are designed for professional electrical panel builders, switchboard manufacturers and industrial power distribution specialists. The PTHS3072 provides a dedicated horizontal rear busbar segregation solution for 300 mm wide and 700 mm deep switchboard structures incorporating an intermediate upright, supporting organised compartmentalisation and modular low-voltage switchboard construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.