Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008553A0000 ABB PFVS2130 Front Vertical Busbar Segregation Panel 200 x 300 mm System pro E power
ABB PFVS2130 (1STQ008553A0000) is a front vertical busbar segregation panel for System pro E power low-voltage switchboards, designed for a nominal 200 mm section height and 300 mm switchboard width without an intermediate upright.
£70.30
Why Choose the ABB PFVS2130 Vertical Busbar Segregation Panel?
The ABB PFVS2130, manufacturer order code 1STQ008553A0000, is a dedicated vertical busbar segregation panel for compatible ABB System pro E power low-voltage electrical switchboards. Designed for front-positioned busbar segregation in structures without an intermediate upright, this internal accessory helps establish physical separation around busbar areas within modular electrical distribution assemblies.
Part of the ABB System pro E power range, the PFVS2130 is specified for a nominal section height of 200 mm and switchboard width of 300 mm. Its vertical configuration supports the organisation of busbar compartments and adjacent functional areas, helping panel builders develop structured internal layouts in compatible low-voltage distribution systems.
The PFVS2130 is particularly relevant to professional switchboard manufacturers, electrical contractors and industrial maintenance teams requiring front vertical busbar segregation without an intermediate upright. Its defined structural application makes it important to select the correct ABB accessory for the intended enclosure width, compartment height and internal upright arrangement.
Key Advantages
- Dedicated vertical busbar segregation panel for ABB System pro E power switchboards.
- Designed for front-positioned internal busbar segregation.
- Specifically intended for structures without an intermediate upright.
- Suitable for a nominal section height of 200 mm.
- Specified for a nominal switchboard width of 300 mm.
- Helps establish physical separation around internal busbar areas.
- Supports organised compartment layouts in low-voltage power distribution assemblies.
- Provides a system-specific alternative to improvised internal partition arrangements.
- Supports consistent switchboard construction using compatible ABB components.
- Suitable for industrial and commercial electrical distribution projects.
Key Features
- ABB System pro E power internal busbar segregation accessory.
- PFVS2130 manufacturer type designation.
- 1STQ008553A0000 ABB manufacturer order code.
- Vertical busbar segregation configuration.
- Front-positioned segregation application.
- Designed for switchboard structures without an intermediate upright.
- 200 mm nominal compatible section height.
- 300 mm nominal compatible switchboard width.
- Supports physical separation between busbar areas and adjacent internal spaces.
- Intended for integration with compatible System pro E power structural components.
- Suitable for professional low-voltage switchboard assembly.
- Functions as an internal mechanical segregation component, not as an electrical switching or protective device.
Front Vertical Busbar Segregation Without an Intermediate Upright
Busbar systems distribute electrical power throughout low-voltage switchboards and must be arranged alongside protective devices, cable connections, structural supports and internal partitions. The ABB PFVS2130 is intended to form part of this arrangement by providing a vertical segregation barrier at the front of the busbar area in the specified System pro E power configuration.
A defining characteristic of the PFVS2130 is its suitability for a structure without an intermediate upright. This distinction matters because segregation accessories designed for different structural arrangements may not be interchangeable. When planning an ABB switchboard, panel builders should match the accessory to the intended upright configuration, compartment layout and associated busbar arrangement rather than selecting solely by nominal dimensions.
The specified 200 mm height and 300 mm width identify the nominal compatible switchboard section and width. They should not automatically be interpreted as the exact external measurements of the supplied partition. The manufacturer's assembly documentation should be consulted to confirm the physical dimensions, mounting arrangement, required fixing components and applicable installation clearances.
The PFVS2130 supports internal compartmentalisation as part of the wider ABB System pro E power modular switchboard system. However, the panel alone does not establish a particular form of separation, ingress protection rating or electrical performance classification. These characteristics depend on the complete switchboard design, associated barriers and covers, and verification of the finished assembly.
Typical Applications
- ABB System pro E power low-voltage electrical switchboards.
- Front vertical segregation of internal busbar areas.
- Switchboard configurations without intermediate uprights.
- Internal compartment separation in nominal 300 mm wide sections.
- Industrial electrical power distribution assemblies.
- Commercial building electrical distribution systems.
- Modular switchboard construction using compatible ABB components.
- Professional electrical panel manufacturing and assembly projects.
Technical Specifications
| Product group | System pro E power |
|---|---|
| Model / type | PFVS2130 |
| ABB order code | 1STQ008553A0000 |
| Manufacturer designation | SEG.BUS.VER.FRONT.H200 NO INT.UP. W300 |
| Product type | Vertical busbar segregation panel |
| Component category | Internal switchboard segregation accessory |
| Segregation application | Busbar compartment separation |
| Segregation orientation | Vertical |
| Segregation position | Front |
| Nominal compatible section height | 200 mm |
| Nominal compatible switchboard width | 300 mm |
| Structural configuration | Without intermediate upright |
| Intermediate upright requirement | Not required in the specified configuration |
| Mounting application | Internal front vertical busbar segregation |
| Compatible switchboard system | ABB System pro E power |
| Primary application | Internal separation of low-voltage switchboard busbar areas |
Frequently Asked Questions
What is the ABB PFVS2130 used for?
The ABB PFVS2130 is a front vertical busbar segregation panel used to provide internal physical separation around busbar areas within compatible ABB System pro E power low-voltage switchboards.
What dimensions is the ABB PFVS2130 designed for?
The PFVS2130 is specified for a nominal section height of 200 mm and switchboard width of 300 mm. These values identify the intended switchboard configuration and should not be treated as confirmed external measurements of the individual partition.
Does the ABB PFVS2130 require an intermediate upright?
No. The PFVS2130 is specifically designed for front vertical busbar segregation in a structure without an intermediate upright. The complete mounting arrangement and any other required supporting components should be checked against the applicable ABB System pro E power assembly documentation.
How does the ABB PFVS2130 differ from the PFVS2042?
Both products are vertical busbar segregation panels for ABB System pro E power switchboards with a nominal section height of 200 mm. The PFVS2130 is intended for a 300 mm wide configuration without an intermediate upright, while the PFVS2042 is intended for a 400 mm wide configuration incorporating front and intermediate uprights. They should not be treated as interchangeable.
Does the ABB PFVS2130 provide an IP rating or a specific form of separation?
No independent IP rating or form of separation is established by the PFVS2130 alone. It is an internal busbar segregation accessory; the final protection rating and form of separation depend on the complete switchboard configuration, associated components and verified assembly.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power segregation accessories support electrical engineers, contractors and switchboard manufacturers in constructing organised low-voltage distribution assemblies. The PFVS2130 provides a dedicated front vertical busbar segregation solution for compatible 200 mm high, 300 mm wide switchboard configurations without intermediate uprights, supporting structured internal compartment layouts and professional electrical panel construction.
