Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTHS3070 (1STQ008549A0000) is a horizontal busbar segregation panel for System pro E power low-voltage switchboards, designed for 300 mm wide and 700 mm deep configurations without an intermediate upright.
£91.92
The ABB PTHS3070, manufacturer order code 1STQ008549A0000, is a dedicated horizontal busbar segregation panel for compatible ABB System pro E power low-voltage electrical switchboards. Designed for structures without an intermediate upright, this internal accessory provides a purpose-designed solution for physical separation around busbar areas within modular power distribution assemblies.
Part of the ABB System pro E power range, the PTHS3070 is specified for switchboard configurations with a nominal width of 300 mm and depth of 700 mm. Its horizontal arrangement supports the separation of busbar compartments from adjacent functional areas, helping electrical panel builders create organised internal layouts.
The PTHS3070 is particularly relevant to professional switchboard manufacturing, industrial electrical installations and commercial power distribution projects requiring horizontal busbar segregation without an intermediate upright. Its system-specific design supports integration with compatible ABB structural components and associated internal partitioning accessories.
Busbar systems distribute electrical power throughout low-voltage switchboards and must be arranged alongside protective devices, cable connections, structural supports and internal partitions. The ABB PTHS3070 is intended to contribute to this arrangement by providing a horizontal segregation barrier associated with the busbar compartment.
A defining characteristic of the PTHS3070 is its suitability for structures without an intermediate upright. This distinction matters during component selection because segregation panels designed for different structural arrangements may not be interchangeable. The correct accessory must correspond to the intended switchboard framework, busbar layout and internal compartment configuration.
The specified 300 mm width and 700 mm depth identify the nominal compatible switchboard configuration rather than necessarily representing the exact external dimensions of the segregation panel itself. Installers should confirm the applicable ABB assembly drawings, mounting arrangements and required electrical clearances before fitting the partition.
As part of the ABB System pro E power modular switchboard system, the PTHS3070 supports structured internal compartmentalisation. The final form of separation, ingress protection rating and electrical performance depend on the complete switchboard assembly and its verified construction. The PTHS3070 is an internal mechanical accessory and does not independently provide electrical switching or circuit protection.
| Product group | System pro E power |
|---|---|
| Model / type | PTHS3070 |
| ABB order code | 1STQ008549A0000 |
| Product type | Horizontal busbar segregation panel |
| Component category | Internal switchboard segregation accessory |
| Segregation application | Busbar compartment separation |
| Segregation orientation | Horizontal |
| Nominal compatible switchboard width | 300 mm |
| Nominal compatible switchboard depth | 700 mm |
| Structural configuration | Without intermediate upright |
| Intermediate upright requirement | Not required |
| Mounting application | Internal horizontal busbar segregation |
| Compatible switchboard system | ABB System pro E power |
| Primary application | Internal separation of low-voltage switchboard busbar areas |
The ABB PTHS3070 is a horizontal busbar segregation panel used to provide internal physical separation around busbar areas within compatible ABB System pro E power low-voltage electrical switchboards.
The PTHS3070 is specified for a nominal switchboard configuration measuring 300 mm wide and 700 mm deep. These dimensions identify the intended enclosure configuration and should not be treated as confirmed external measurements of the individual partition.
No. The PTHS3070 is specifically intended for switchboard structures without an intermediate upright. The complete mounting arrangement and any other required supporting components should be checked against the applicable ABB System pro E power assembly documentation.
The PTHS3070 is intended for a 300 mm wide, 700 mm deep switchboard configuration without an intermediate upright. Other horizontal busbar segregation panels may be designed for structures incorporating rear and intermediate uprights. The correct panel depends on the switchboard dimensions and structural arrangement.
No independent IP rating or form of separation is established by the PTHS3070 alone. It is an internal busbar segregation accessory; the final protection rating and form of separation depend on the complete switchboard configuration, associated components and verified assembly.
ABB System pro E power segregation accessories support electrical engineers, industrial contractors and switchboard manufacturers in constructing organised low-voltage distribution assemblies. The PTHS3070 provides a dedicated horizontal busbar segregation solution for 300 mm wide, 700 mm deep switchboard configurations without intermediate uprights, helping achieve structured internal compartment layouts and professional electrical panel construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.