1STQ008540A0000 ABB PFVS2062 Front Vertical Busbar Segregation H200 Intermediate Upright W600 System pro E power

Why Choose the ABB PFVS2062 Front Vertical Busbar Segregation Accessory?

The ABB PFVS2062 (1STQ008540A0000) is a dedicated front vertical busbar segregation accessory designed for compatible ABB System pro E power low-voltage switchgear enclosures. Identified by the manufacturer as SEG.BUS.VER.FRONT.H200+INT.UP.W600, this component supports internal segregation arrangements associated with vertical busbar areas and intermediate upright configurations.

Part of the ABB System pro E power range, the PFVS2062 is specified with a 200 mm height designation and a 600 mm nominal enclosure width. Its front vertical arrangement is intended for compatible switchboard configurations requiring coordinated internal separation around designated busbar sections.

The manufacturer's INT.UP. reference identifies an intermediate upright configuration, distinguishing the PFVS2062 from segregation accessories intended for other structural arrangements. Correct selection is important when coordinating internal barriers, enclosure framework components and electrical distribution equipment.

Designed for professional electrical panel-building applications, the ABB PFVS2062 supports organised internal switchgear construction using compatible System pro E power components. Its application is particularly relevant where the switchboard design includes vertical busbar distribution and requires an appropriately configured front segregation arrangement.

Key Advantages

• Dedicated busbar segregation: Supports internal separation arrangements associated with vertical busbar sections in compatible switchgear enclosures.
• Front vertical configuration: Designed for segregation at the designated front area of a vertical busbar arrangement.
• Intermediate upright compatibility: Specified for a configuration incorporating an intermediate upright.
• 200 mm height designation: Supports matching sectional segregation layouts.
• 600 mm nominal width: Intended for compatible System pro E power enclosure sections.
• Modular enclosure integration: Developed for ABB's System pro E power low-voltage switchgear platform.
• Organised busbar compartments: Helps establish defined internal boundaries around designated electrical distribution areas.
• Coordinated component selection: Provides a dedicated ABB product designation for the specified busbar segregation configuration.
• Professional switchboard construction: Supports industrial and commercial electrical distribution assemblies using correctly matched accessories.

Key Features

• Manufacturer: ABB.
• Product designation: PFVS2062.
• ABB order code: 1STQ008540A0000.
• Product family: System pro E power.
• Accessory type: Front vertical busbar segregation component.
• Segregation application: Busbar area.
• Segregation orientation: Vertical.
• Segregation position: Front.
• Specified height: 200 mm.
• Nominal enclosure width: 600 mm.
• Structural configuration: Intermediate upright.
• Manufacturer description: SEG.BUS.VER.FRONT.H200+INT.UP.W600.
• Compatible enclosure platform: ABB System pro E power.
• Primary application: Internal front segregation of compatible vertical busbar arrangements.

Reliable Front Vertical Busbar Segregation for Modular Switchgear

Busbar arrangements are an important part of low-voltage electrical distribution systems. Within a switchgear assembly, busbars distribute electrical power between incoming devices, outgoing circuits and other connected equipment. Depending on the cabinet design, internal partitions and segregation accessories may be used to establish boundaries between busbar areas and adjacent compartments.

The ABB PFVS2062 is specifically identified as a front vertical busbar segregation accessory. Its intended function is to contribute to the internal separation arrangement associated with a compatible vertical busbar section, rather than to act as an electrical conductor, busbar support or complete enclosure.

The manufacturer's description includes H200+INT.UP., identifying a 200 mm height configuration associated with an intermediate upright. This distinction is important because the positioning and mounting of internal segregation components depend on the structural arrangement of the switchgear cabinet.

The specified 600 mm nominal width identifies the corresponding enclosure width. Correctly matching the PFVS2062 to the intended cabinet configuration helps ensure that the segregation accessory can be coordinated with the surrounding framework, busbar compartment and complementary partitioning components.

The ABB System pro E power platform provides modular components for constructing low-voltage electrical distribution switchboards. Its coordinated enclosure structures, internal segregation accessories and equipment mounting arrangements allow panel builders to develop layouts suited to different power distribution requirements.

Busbar segregation components can contribute to physical separation within an electrical assembly, but the PFVS2062 alone does not establish electrical insulation, touch protection, an IEC 61439 form of internal separation or an arc-fault performance classification. These characteristics depend on the complete switchgear design, the other components installed and the applicable assembly verification.

Before installation, verify the intended vertical busbar arrangement, intermediate upright compatibility, cabinet width, fixing interfaces and any required complementary segregation accessories. The completed assembly should follow ABB installation instructions and applicable electrical safety requirements, including appropriate isolation procedures when working on switchgear.

Typical Applications

• ABB System pro E power low-voltage switchgear assemblies.
• Industrial main electrical distribution boards.
• Commercial and industrial power distribution cabinets.
• Switchgear enclosures incorporating vertical busbar arrangements.
• Compatible busbar compartments requiring front vertical segregation.
• Cabinet configurations incorporating intermediate uprights.
• System pro E power enclosure sections with a nominal width of 600 mm.
• Electrical distribution assemblies using 200 mm height segregation configurations.
• OEM switchboard manufacturing and professional electrical panel-building projects.
• Replacement or refurbishment of compatible ABB vertical busbar segregation components.