Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTHS1092 (1STQ008538A0000) is a horizontal busbar segregation panel for System pro E power low-voltage switchboards, designed for 1000 mm wide and 900 mm deep configurations incorporating rear and intermediate uprights.
£113.31
The ABB PTHS1092, manufacturer order code 1STQ008538A0000, is a dedicated horizontal busbar segregation panel for compatible ABB System pro E power low-voltage electrical switchboards. Designed for structures incorporating rear and intermediate uprights, this internal segregation accessory helps establish physical separation around busbar areas within modular power distribution assemblies.
Part of the ABB System pro E power range, the PTHS1092 is specified for switchboard configurations with a nominal width of 1000 mm and depth of 900 mm. Its horizontal arrangement supports the separation of busbar compartments from adjacent functional areas, helping switchboard manufacturers create structured internal layouts in larger distribution assemblies.
The PTHS1092 is particularly suitable for professional panel builders, industrial electrical contractors and commercial power distribution projects requiring horizontal busbar segregation in structures with rear and intermediate uprights. Its system-specific design makes it a practical choice when assembling compatible ABB System pro E power switchboards with defined internal partitioning requirements.
Busbar systems distribute electrical power throughout low-voltage switchboard assemblies. Their installation must be coordinated with protective devices, electrical connections, structural supports and internal partitions. The ABB PTHS1092 is intended to form part of this arrangement by providing a horizontal segregation barrier associated with the busbar compartment.
The PTHS1092 is specifically identified for structures incorporating rear and intermediate uprights. This structural requirement is important because segregation panels designed for different upright arrangements may not be interchangeable. Correct accessory selection depends on the intended switchboard framework, busbar layout, compartment arrangement and nominal enclosure dimensions.
The specified 1000 mm width and 900 mm depth describe the nominal compatible switchboard configuration rather than necessarily representing the exact external dimensions of the segregation panel itself. Installers should verify the applicable ABB assembly documentation, supporting components and busbar arrangement before fitting the partition.
As part of the ABB System pro E power modular switchboard system, the PTHS1092 supports structured internal compartmentalisation in deeper distribution enclosures. The final form of separation, ingress protection rating and electrical performance depend on the complete switchboard assembly and its verified construction. The PTHS1092 is an internal mechanical accessory and does not independently provide electrical switching or circuit protection.
| Product group | System pro E power |
|---|---|
| Model / type | PTHS1092 |
| ABB order code | 1STQ008538A0000 |
| Product type | Horizontal busbar segregation panel |
| Component category | Internal switchboard segregation accessory |
| Segregation application | Busbar compartment separation |
| Segregation orientation | Horizontal |
| Nominal compatible switchboard width | 1000 mm |
| Nominal compatible switchboard depth | 900 mm |
| Structural configuration | Rear and intermediate uprights |
| Intermediate upright | Present in the intended structural configuration |
| Rear upright | Present in the intended structural configuration |
| Mounting application | Internal horizontal busbar segregation |
| Compatible switchboard system | ABB System pro E power |
| Primary application | Internal separation of low-voltage switchboard busbar areas |
The ABB PTHS1092 is a horizontal busbar segregation panel used to provide internal physical separation around busbar areas within compatible ABB System pro E power low-voltage electrical switchboards.
The PTHS1092 is specified for a nominal switchboard configuration measuring 1000 mm wide and 900 mm deep. These dimensions identify the intended enclosure configuration and should not be treated as confirmed external measurements of the individual partition.
Yes. The PTHS1092 is intended for a structural arrangement incorporating rear and intermediate uprights. The complete mounting configuration and any additional supporting components should be checked against the applicable ABB System pro E power assembly documentation.
Both products are horizontal busbar segregation panels for ABB System pro E power switchboards incorporating rear and intermediate uprights. The PTHS1092 is intended for a 1000 mm wide, 900 mm deep switchboard configuration, whereas the PTHS8052 is designed for an 800 mm wide, 500 mm deep configuration.
No independent IP rating or form of separation is established by the PTHS1092 alone. It is an internal busbar segregation accessory; the final protection rating and form of separation depend on the complete switchboard configuration, associated components and verified assembly.
ABB System pro E power segregation accessories support electrical engineers, industrial contractors and switchboard manufacturers in constructing organised low-voltage distribution assemblies. The PTHS1092 provides a dedicated horizontal busbar segregation solution for 1000 mm wide, 900 mm deep switchboard configurations incorporating rear and intermediate uprights, helping achieve structured internal compartment layouts and professional electrical panel construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.