Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTHS8092 1STQ008537A0000 System Pro E Power horizontal busbar segregation component for compatible low-voltage switchgear cabinet arrangements with rear and intermediate uprights, a nominal width of 800 mm and a nominal depth of 900 mm.
£110.88
The ABB PTHS8092 1STQ008537A0000 is a dedicated horizontal busbar segregation component designed for integration into compatible ABB System Pro E Power low-voltage switchgear and electrical distribution cabinets. Part of the ABB System Pro E Power range, this accessory is identified by the manufacturer's designation SEG.BUS.HOR.REAR +INT.UP.W800 FOR D900, specifying a horizontal busbar segregation arrangement associated with rear and intermediate uprights.
Developed for electrical panel builders, switchgear manufacturers and industrial electrical contractors, the PTHS8092 supports organised internal separation of busbar areas within modular switchboards. Its horizontal segregation configuration helps establish defined boundaries between designated busbar compartments and adjacent functional areas, supporting structured equipment layouts and the integration of compatible low-voltage electrical distribution components.
Specified for a 800 mm nominal cabinet width and 900 mm nominal cabinet depth, the ABB PTHS8092 is intended for corresponding System Pro E Power enclosure arrangements. The manufacturer's REAR +INT.UP. designation identifies a configuration associated with rear and intermediate uprights. The exact installation position, compatible structural components and mounting requirements should be verified against the applicable ABB System Pro E Power assembly documentation.
The ABB System Pro E Power range provides a modular enclosure platform for constructing low-voltage electrical distribution and switchgear assemblies. Its dedicated busbar segregation accessories allow electrical panel builders to organise designated busbar spaces in relation to circuit breaker compartments, cable connection areas and other functional sections. Where required by the approved switchboard design, horizontal segregation components can contribute to the physical separation of busbar compartments within a modular electrical distribution assembly.
The ABB PTHS8092 is specifically designated for horizontal busbar segregation in compatible cabinets with a nominal width of 800 mm and depth of 900 mm. Its REAR +INT.UP. reference distinguishes the intended installation arrangement from configurations using different upright positions. Correct assembly requires confirmation of the busbar layout, compatible structural components, mounting accessories, electrical clearances and adjacent segregation elements. The component alone does not establish a particular IEC 61439 form of separation, provide a standalone electrical insulation rating or determine the ingress protection rating of the completed enclosure.
| Product group | System Pro E Power |
|---|---|
| Model / type | PTHS8092 |
| ABB order code | 1STQ008537A0000 |
| Manufacturer designation | SEG.BUS.HOR.REAR +INT.UP.W800 FOR D900 |
| Product type | Horizontal busbar segregation component |
| Segregation application | Busbar area |
| Segregation orientation | Horizontal |
| Upright configuration | Rear and intermediate upright |
| Manufacturer configuration reference | REAR +INT.UP. |
| Nominal cabinet width | 800 mm |
| Nominal cabinet depth | 900 mm |
| Installation system | ABB System Pro E Power |
| Application | Internal busbar segregation in low-voltage switchgear assemblies |
| Product category | Busbar segregation panels and switchgear enclosure accessories |
| Compatibility | Appropriate ABB System Pro E Power cabinet configurations |
| Assembly verification | Dependent on the completed switchgear design and installation |
The ABB PTHS8092 is a horizontal busbar segregation component designed for internal separation of designated busbar areas within compatible ABB System Pro E Power low-voltage switchgear cabinets. It is specified for an arrangement associated with rear and intermediate uprights.
The manufacturer's designation specifies a 800 mm nominal width and 900 mm nominal depth. These values identify the intended cabinet configuration rather than a complete set of measured physical component dimensions.
SEG.BUS.HOR. identifies a horizontal busbar segregation arrangement. The PTHS8092 is intended for compatible System Pro E Power assemblies where horizontal separation of a designated busbar area is required by the switchgear design.
REAR +INT.UP. identifies a configuration associated with rear and intermediate uprights. The exact mounting position, structural arrangement and compatible components should be confirmed against the relevant ABB System Pro E Power installation documentation.
The ABB PTHS8092 is a busbar segregation accessory, but a specified form of internal separation depends on the design and verification of the complete switchgear assembly. Compatible barriers, partitions, mounting components and other enclosure accessories must be selected and installed in accordance with the applicable ABB documentation and assembly requirements.
ABB System Pro E Power segregation accessories support the construction of organised, configurable and dependable low-voltage switchgear assemblies. The PTHS8092 horizontal busbar segregation component provides a dedicated internal separation solution for compatible 800 mm wide and 900 mm deep cabinet arrangements incorporating rear and intermediate uprights, helping electrical panel builders implement structured busbar compartment layouts.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.