Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTHS6092 1STQ008536A0000 System Pro E Power horizontal busbar segregation component for compatible low-voltage switchgear cabinet arrangements with rear and intermediate uprights, a nominal width of 600 mm and a nominal depth of 900 mm.
£105.66
The ABB PTHS6092 1STQ008536A0000 is a dedicated horizontal busbar segregation component designed for integration into compatible ABB System Pro E Power low-voltage switchgear and electrical distribution cabinets. Part of the ABB System Pro E Power range, this accessory is identified by the manufacturer's designation SEG.BUS.HOR.REAR +INT.UP.W600 FOR D900, specifying a horizontal busbar segregation arrangement associated with rear and intermediate uprights.
Developed for electrical panel builders, switchgear manufacturers and industrial electrical contractors, the PTHS6092 supports organised internal separation of busbar areas within modular switchboards. Its horizontal segregation configuration is intended to help establish defined boundaries between designated busbar spaces and other functional areas, supporting structured switchgear layouts and the integration of compatible distribution equipment.
Specified for a 600 mm nominal cabinet width and 900 mm nominal cabinet depth, the ABB PTHS6092 is intended for corresponding System Pro E Power enclosure arrangements. The manufacturer's REAR +INT.UP. designation identifies a configuration associated with rear and intermediate uprights. The exact installation position, compatible enclosure components and mounting requirements should be verified against the relevant ABB System Pro E Power assembly documentation.
The ABB System Pro E Power range provides a modular enclosure platform for constructing low-voltage electrical distribution and switchgear assemblies. Busbar segregation accessories form part of the wider internal separation system, allowing panel builders to organise designated busbar areas in relation to circuit breaker compartments, connection spaces and other functional sections. Where required by the approved assembly design, horizontal segregation components can contribute to the physical separation of busbar spaces within a switchboard.
The ABB PTHS6092 is specifically designated for horizontal busbar segregation in compatible cabinet arrangements with a nominal width of 600 mm and depth of 900 mm. Its REAR +INT.UP. reference distinguishes the intended configuration from arrangements using different upright positions. Correct installation requires confirmation of the busbar layout, compatible structural components, mounting accessories, electrical clearances and adjacent segregation elements. The component itself does not provide electrical insulation ratings, establish a particular IEC 61439 form of separation or determine the completed assembly's ingress protection rating independently.
| Product group | System Pro E Power |
|---|---|
| Model / type | PTHS6092 |
| ABB order code | 1STQ008536A0000 |
| Manufacturer designation | SEG.BUS.HOR.REAR +INT.UP.W600 FOR D900 |
| Product type | Horizontal busbar segregation component |
| Segregation application | Busbar area |
| Segregation orientation | Horizontal |
| Upright configuration | Rear and intermediate upright |
| Manufacturer configuration reference | REAR +INT.UP. |
| Nominal cabinet width | 600 mm |
| Nominal cabinet depth | 900 mm |
| Installation system | ABB System Pro E Power |
| Application | Internal busbar segregation in low-voltage switchgear assemblies |
| Product category | Busbar segregation panels and switchgear enclosure accessories |
| Compatibility | Appropriate ABB System Pro E Power cabinet configurations |
| Assembly verification | Dependent on the completed switchgear design and installation |
The ABB PTHS6092 is a horizontal busbar segregation component designed for internal separation of designated busbar areas within compatible ABB System Pro E Power low-voltage switchgear cabinets. It is specified for an arrangement associated with rear and intermediate uprights.
The manufacturer's designation specifies a 600 mm nominal width and 900 mm nominal depth. These values identify the intended cabinet configuration rather than a complete set of measured physical component dimensions.
SEG.BUS.HOR. identifies a horizontal busbar segregation arrangement. The PTHS6092 is intended for compatible System Pro E Power assemblies where horizontal separation of a designated busbar area is required by the switchgear design.
REAR +INT.UP. identifies a configuration associated with rear and intermediate uprights. The exact mounting position, structural arrangement and compatible components should be confirmed against the relevant ABB System Pro E Power installation documentation.
The ABB PTHS6092 is a busbar segregation accessory, but a specified form of internal separation depends on the design and verification of the complete switchgear assembly. Compatible barriers, partitions, mounting components and other enclosure accessories must be selected and installed in accordance with the applicable ABB documentation and assembly requirements.
ABB System Pro E Power segregation accessories support the construction of organised, configurable and dependable low-voltage switchgear assemblies. The PTHS6092 horizontal busbar segregation component provides a dedicated internal separation solution for compatible 600 mm wide and 900 mm deep cabinet arrangements incorporating rear and intermediate uprights, helping electrical panel builders implement structured busbar compartment layouts.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.