Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTHS1072 (1STQ008534A0000) is a System pro E Power horizontal rear busbar segregation kit designed for 1000 mm wide and 700 mm deep low-voltage switchboard structures incorporating an intermediate upright.
£110.58
The ABB PTHS1072 (1STQ008534A0000) is a dedicated horizontal rear busbar segregation kit designed for ABB System pro E Power low-voltage electrical distribution switchboards. Developed for structures incorporating an intermediate upright, this accessory supports physical separation of rear horizontal busbar areas within compatible modular switchboard assemblies.
As part of the ABB System pro E Power segregation accessory range, the PTHS1072 provides a practical solution for organising internal busbar compartments in industrial and commercial power distribution systems. Its horizontal rear configuration is specifically intended for switchboards requiring separation around rear-mounted busbar arrangements, helping electrical panel builders establish defined boundaries between busbar sections and adjacent internal areas.
Designed for a 1000 mm wide switchboard structure with a 700 mm nominal depth, the PTHS1072 is suitable for configurations incorporating an intermediate upright. Its dedicated rear segregation arrangement supports coordinated installation with compatible ABB System pro E Power structural and partition components.
The ABB PTHS1072 provides a dedicated horizontal segregation arrangement for rear busbar areas within compatible System pro E Power switchboards. Horizontal busbar segregation components help establish physical boundaries between selected internal compartments, supporting organised distribution layouts and separation of busbar sections from adjacent equipment areas. This is particularly relevant in modular switchboards where rear busbar routing forms part of the overall electrical distribution architecture.
The 1000 mm wide, 700 mm deep configuration is designed for structures incorporating an intermediate upright. When installed with the appropriate ABB enclosure framework, complementary partitions and mounting components, the PTHS1072 contributes to a coordinated internal segregation arrangement. The kit is a mechanical segregation accessory rather than an independent electrical protective device, and the final form of separation depends on the complete switchboard design and applicable assembly verification requirements.
| Series | System pro E Power |
|---|---|
| Product SKU | 1STQ008534A0000 |
| ABB order code | 1STQ008534A0000 |
| Product group | System Pro E Power |
| Product type | Horizontal rear busbar segregation kit |
| Accessory category | Switchboard internal segregation and partition accessories |
| Nominal switchboard width | 1000 mm |
| Nominal switchboard depth | 700 mm |
| Installation orientation | Horizontal |
| Segregation position | Rear |
| Busbar arrangement | Horizontal rear busbar system |
| Structural configuration | With intermediate upright |
| Compatible enclosure system | ABB System pro E Power |
| Application | Internal rear busbar segregation in low-voltage switchboards |
The ABB PTHS1072 is a horizontal rear busbar segregation kit used to provide physical separation around rear busbar areas within compatible ABB System pro E Power low-voltage switchboards.
The PTHS1072 is designed for 1000 mm wide and 700 mm deep ABB System pro E Power switchboard structures.
Yes. The PTHS1072 is specifically intended for switchboard configurations incorporating an intermediate upright.
The PTHS1072 is designed for horizontal rear busbar segregation. Front or alternative segregation arrangements require the appropriate components specified for those configurations.
The PTHS1072 is a horizontal segregation kit intended for rear busbar areas within compatible System pro E Power switchboard structures.
No. The PTHS1072 is a mechanical segregation accessory and does not independently provide overload or short-circuit protection. Appropriate circuit breakers and other electrical protective devices must be selected separately.
Yes. The PTHS1072 (1STQ008534A0000) belongs to the ABB System pro E Power range and is intended for compatible modular low-voltage distribution switchboard assemblies.
No. The achieved form of internal separation depends on the complete switchboard assembly, including its structural components, complementary segregation accessories, equipment layout and applicable verification requirements.
ABB System pro E Power segregation accessories support professional electrical panel builders, switchboard manufacturers and industrial power distribution engineers in developing organised modular low-voltage distribution assemblies. The PTHS1072 provides a dedicated horizontal rear busbar segregation solution for 1000 mm wide and 700 mm deep switchboard structures incorporating an intermediate upright.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.