Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTHS1052 is a System pro E power rear horizontal busbar segregation accessory designed for compatible 1000 mm wide and 500 mm deep low-voltage switchboard configurations incorporating intermediate uprights.
£109.02
The ABB PTHS1052, order code 1STQ008530A0000, is a dedicated rear horizontal busbar segregation accessory designed for the ABB System pro E power low-voltage switchboard system. This component is specified for a 1000 mm wide switchboard configuration with a nominal depth of 500 mm, incorporating intermediate uprights and a rear-side installation arrangement.
As part of ABB's modular System pro E power range, the PTHS1052 supports the construction of electrical distribution assemblies where internal compartment organisation and physical separation of busbar areas are required. Its horizontal busbar segregation configuration helps establish defined boundaries within compatible switchboard structures, supporting organised equipment layouts and integration with associated ABB structural components.
The manufacturer's description, SEG.BUS.HOR.REAR +INT.UP.W1000 FOR D500, identifies a horizontal busbar segregation component intended for rear-side installation with intermediate uprights. Its specified width and depth distinguish the PTHS1052 from segregation accessories intended for alternative switchboard dimensions, front-side mounting arrangements or structures without intermediate uprights.
The ABB System pro E power range provides a modular platform for constructing low-voltage electrical distribution switchboards used in industrial facilities, commercial buildings and infrastructure installations. Internal segregation accessories such as the PTHS1052 contribute to the organisation of switchboard compartments by helping establish physical boundaries around designated electrical equipment areas.
The ABB PTHS1052 is specifically configured for horizontal busbar segregation in a compatible switchboard section measuring 1000 mm wide and designed for a 500 mm depth arrangement. Its dimensional configuration must correspond to the selected enclosure structure, internal busbar layout and adjacent segregation components.
The rear-side designation identifies the intended installation arrangement within the switchboard. Busbar compartments may be positioned according to the overall electrical distribution design, and selecting the appropriate segregation accessory is important for compatibility with the surrounding structural members, conductors and equipment spaces.
A defining feature of the PTHS1052 is its configuration for switchboards incorporating intermediate uprights. These structural members are used in certain modular assemblies to support internal arrangements and component positioning. The PTHS1052 should therefore be matched to the specified structural configuration rather than substituted automatically for accessories designed for switchboards without intermediate uprights.
Horizontal busbar segregation can help establish physical separation between a designated busbar area and neighbouring compartments. However, the actual degree of separation depends on the complete assembly, including compatible partitions, barriers, covers, supports and other internal components. The PTHS1052 is a segregation accessory rather than a complete busbar system or standalone protective device.
Where a particular form of internal separation is required, the completed switchboard must be designed and verified according to the applicable requirements of BS EN IEC 61439. Installing the PTHS1052 alone does not establish a specific form of separation, ingress protection rating, short-circuit withstand rating or electrical performance. Appropriate clearances, conductor arrangements and manufacturer installation instructions must be considered during assembly.
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ008530A0000 |
| Product group | System Pro E Power |
| Product type | Horizontal busbar segregation accessory |
| Segregation application | Busbar compartment separation |
| Segregation orientation | Horizontal |
| Installation position | Rear-side configuration |
| Intermediate upright configuration | With intermediate uprights |
| Specified width | 1000 mm |
| Compatible switchboard depth | 500 mm |
| Nominal width × depth configuration | 1000 mm × 500 mm |
| Manufacturer description | SEG.BUS.HOR.REAR +INT.UP.W1000 FOR D500 |
| Installation application | Internal busbar segregation |
| System compatibility | ABB System pro E power |
| Equipment application | Low-voltage electrical distribution assemblies |
The ABB PTHS1052 is a rear horizontal busbar segregation accessory designed for compatible ABB System pro E power low-voltage switchboards. It supports physical separation of designated busbar areas in configurations incorporating intermediate uprights.
The PTHS1052 is specified for a nominal width of 1000 mm and a compatible switchboard depth of 500 mm. These dimensions should be matched to the corresponding ABB System pro E power assembly configuration.
The designation identifies a rear-side horizontal busbar segregation arrangement intended for compatible switchboard structures incorporating intermediate uprights. It distinguishes the PTHS1052 from accessories designed for alternative mounting positions or structural arrangements.
The PTHS1052 is a horizontal busbar segregation accessory, not an electrical busbar conductor. It is intended to form part of the internal separation arrangement around designated busbar areas within a compatible switchboard.
No. The PTHS1052 is an individual busbar segregation accessory. The finished switchboard's form of internal separation depends on the complete arrangement of compatible partitions, barriers, supports, covers and other components, together with the applicable assembly verification requirements.
ABB System pro E power accessories support the construction of modular low-voltage electrical switchboards with organised internal layouts. The ABB PTHS1052 provides a dedicated rear horizontal busbar segregation solution for compatible 1000 mm wide and 500 mm deep configurations with intermediate uprights, helping electrical panel builders integrate system-specific separation components into professional power distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.