Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBS8091 1STQ008525A0000 is a System pro E power blind vertical lateral segregation accessory for compatible rear and intermediate upright configurations, specified with a nominal height of 800 mm and depth of 900 mm.
£95.37
The ABB PTBS8091 (1STQ008525A0000) is a dedicated blind vertical lateral segregation accessory designed for compatible ABB System pro E power low-voltage switchgear enclosures. Identified by the manufacturer as SEGR.VR.LAT.REAR+INT.UP.H800 D900 BLIND, this component supports internal compartment separation within electrical distribution cabinets incorporating the specified rear and intermediate upright arrangement.
Part of the ABB System pro E power range, the PTBS8091 is specified for a nominal 800 mm height and 900 mm depth. Its vertical lateral configuration is intended for modular switchgear layouts where internal partitions are required to establish defined boundaries between designated equipment and distribution areas.
The manufacturer's REAR+INT.UP. designation identifies a configuration associated with rear and intermediate uprights. The blind panel arrangement indicates a partition without a designated opening, making this accessory suitable for compatible installations requiring a continuous separation surface at the specified position.
Designed for professional electrical panel-building applications, the ABB PTBS8091 supports coordinated switchgear construction through compatibility with the wider System pro E power range of enclosure structures, internal segregation accessories and equipment mounting components.
Internal segregation is an important consideration in the design of low-voltage switchgear assemblies. Depending on the required electrical distribution configuration, partitions and barriers may be used to separate equipment compartments, busbar areas, cable spaces and other designated internal sections. Correct component selection helps panel builders implement the intended compartment layout.
The ABB PTBS8091 is designed for a vertical lateral segregation arrangement associated with rear and intermediate uprights. This configuration distinguishes it from segregation accessories intended for alternative structural arrangements within the System pro E power enclosure platform.
The manufacturer's REAR+INT.UP. designation indicates the relevant rear and intermediate upright arrangement. Correctly matching this configuration to the cabinet structure is important because internal partitions must be coordinated with the enclosure framework, mounting interfaces and any additional segregation components.
The blind configuration provides a partition without a designated opening. This arrangement is suitable where the switchboard design requires a continuous separation surface at the specified location rather than a panel incorporating a planned cable or equipment passage.
With a nominal 800 mm height and 900 mm depth, the PTBS8091 is intended for the corresponding System pro E power segregation arrangement. The stated dimensions identify the manufacturer's specified configuration and should not be treated as confirmation of every physical measurement, fixing position or installation clearance.
The ABB System pro E power platform supports modular low-voltage switchgear construction through coordinated enclosure structures, mounting accessories, panels and internal separation components. Selecting the correct segregation accessory helps ensure that the planned compartment arrangement is compatible with the surrounding cabinet framework.
Although the PTBS8091 contributes to internal partitioning, an individual segregation accessory does not independently establish a particular IEC 61439 form of internal separation, ingress protection classification, electrical insulation rating or arc-fault performance level. These characteristics depend on the design, construction and verification of the complete switchgear assembly.
Before installation, confirm compatibility with the specified rear and intermediate upright configuration, enclosure dimensions, fixing arrangements and any complementary barriers or supports. Installation should follow the relevant ABB technical instructions and applicable electrical safety requirements.
| Brand | ABB |
|---|---|
| Product range | System pro E power |
| Product designation | PTBS8091 |
| Manufacturer part number | 1STQ008525A0000 |
| Manufacturer description | SEGR.VR.LAT.REAR+INT.UP.H800 D900 BLIND |
| Product category | Electrical enclosure segregation accessories |
| Component type | Blind vertical lateral segregation accessory |
| Segregation orientation | Vertical |
| Segregation position | Lateral |
| Panel arrangement | Blind |
| Specified structural configuration | Rear and intermediate uprights |
| Nominal height | 800 mm |
| Nominal depth | 900 mm |
| Compatible enclosure system | ABB System pro E power |
| Primary function | Internal lateral compartment separation |
| Intended application | Low-voltage switchgear and electrical distribution assemblies |
| Installation requirement | Compatible enclosure structure and associated segregation components |
The ABB PTBS8091 is a blind vertical lateral segregation accessory designed for compatible ABB System pro E power low-voltage switchgear enclosures. It supports internal compartment separation in cabinet configurations incorporating rear and intermediate uprights.
The manufacturer specifies a nominal 800 mm height and 900 mm depth. Complete physical dimensions, fixing positions and installation requirements should be verified against the relevant ABB technical documentation.
REAR+INT.UP. identifies a configuration associated with rear and intermediate uprights. It distinguishes this segregation accessory from versions intended for different enclosure structural arrangements. Exact compatibility should be checked against ABB System pro E power documentation.
Blind vertical lateral segregation refers to a vertically arranged internal partition intended to separate designated lateral areas of a switchgear enclosure without a planned opening through the panel. The precise installation position and separation achieved depend on the complete cabinet design.
Both products are ABB System pro E power blind vertical lateral segregation accessories specified for rear and intermediate upright configurations. The PTBS8091 is designated for an 800 mm nominal height and 900 mm nominal depth, whereas the PTBS1072 is specified for a 1000 mm nominal height and 700 mm nominal depth.
ABB System pro E power segregation accessories support professional low-voltage switchgear construction through coordinated internal partitioning components, helping electrical panel builders establish organised equipment compartments, compatible structural arrangements and consistent electrical distribution cabinet layouts.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.