Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBS1072 1STQ008524A0000 is a System pro E power blind vertical lateral segregation accessory for compatible rear and intermediate upright configurations, specified with a nominal height of 1000 mm and depth of 700 mm.
£86.74
The ABB PTBS1072 (1STQ008524A0000) is a dedicated blind vertical lateral segregation accessory designed for compatible ABB System pro E power low-voltage switchgear enclosures. Identified by the manufacturer as SEGR.V.LAT.REAR+INT.UP.H1000 D700 BLIND, this component supports internal compartment separation in electrical distribution cabinets requiring the specified rear and intermediate upright arrangement.
Part of the ABB System pro E power range, the PTBS1072 is specified for a nominal 1000 mm height and 700 mm depth. Its vertical lateral configuration is intended for compatible switchboard layouts where designated internal areas must be separated using coordinated enclosure partitions and structural accessories.
The manufacturer's REAR+INT.UP. designation identifies a configuration associated with rear and intermediate uprights. The blind arrangement indicates a partition without a designated opening, making the PTBS1072 suitable for applications requiring a continuous separation surface at the specified installation position.
Developed for professional low-voltage switchgear construction, the ABB PTBS1072 helps electrical panel builders establish organised internal compartment layouts while maintaining compatibility with the wider System pro E power modular enclosure platform.
Internal segregation plays an important role in the design and construction of low-voltage electrical switchgear. Depending on the required assembly layout, partitions and barriers can separate designated equipment compartments, busbar areas, cable spaces and other internal sections. Correctly selected segregation components help establish the intended compartment boundaries within the enclosure.
The ABB PTBS1072 is designed for a vertical lateral segregation arrangement associated with rear and intermediate uprights. These structural elements form part of the compatible cabinet configuration and provide the context for positioning the segregation accessory within the electrical enclosure.
The manufacturer's REAR+INT.UP. designation distinguishes the PTBS1072 from segregation variants intended for different upright arrangements. This distinction is important when selecting accessories for a modular switchboard because similar-looking partitions may be intended for different structural configurations.
The blind panel design provides a partition surface without a designated opening. This arrangement can be appropriate where the enclosure design requires a continuous internal barrier at the specified location rather than a partition incorporating a planned cable or equipment passage.
With a nominal 1000 mm height and 700 mm depth, the PTBS1072 is intended for the corresponding ABB System pro E power segregation configuration. These dimensions identify the manufacturer's specified arrangement and should not be interpreted as confirmation of every physical measurement, mounting clearance or fixing position.
The ABB System pro E power platform supports modular low-voltage switchgear construction through coordinated enclosure structures, mounting accessories, panels and internal separation components. Selecting the appropriate segregation variant helps panel builders maintain consistency between the cabinet framework and its internal partitioning system.
Although the PTBS1072 contributes to compartment separation, an individual segregation panel does not independently establish a particular IEC 61439 form of internal separation, ingress protection classification, electrical insulation rating or arc-fault performance level. These characteristics depend on the complete switchgear assembly and its applicable design verification.
Before installation, verify compatibility with the rear and intermediate upright arrangement, enclosure dimensions, fixing interfaces and any required complementary barriers or supports. Installation should follow ABB technical instructions and the relevant electrical safety requirements.
| Brand | ABB |
|---|---|
| Product range | System pro E power |
| Product designation | PTBS1072 |
| Manufacturer part number | 1STQ008524A0000 |
| Manufacturer description | SEGR.V.LAT.REAR+INT.UP.H1000 D700 BLIND |
| Product category | Electrical enclosure segregation accessories |
| Component type | Blind vertical lateral segregation accessory |
| Segregation orientation | Vertical |
| Segregation position | Lateral |
| Panel arrangement | Blind |
| Specified structural arrangement | Rear and intermediate uprights |
| Nominal height | 1000 mm |
| Nominal depth | 700 mm |
| Compatible enclosure system | ABB System pro E power |
| Primary function | Internal lateral compartment separation |
| Intended application | Low-voltage switchgear and electrical distribution assemblies |
| Installation requirement | Compatible enclosure structure and associated segregation components |
The ABB PTBS1072 is a blind vertical lateral segregation accessory designed for compatible ABB System pro E power low-voltage switchgear enclosures. It supports internal compartment separation in configurations associated with rear and intermediate uprights.
The manufacturer specifies a nominal 1000 mm height and 700 mm depth. The complete physical dimensions, fixing positions and installation requirements should be confirmed against the applicable ABB technical documentation.
REAR+INT.UP. identifies the manufacturer's rear and intermediate upright configuration. It distinguishes this segregation accessory from variants intended for other cabinet structural arrangements. Exact compatibility should be verified against ABB System pro E power documentation.
Blind vertical lateral segregation refers to a vertically arranged internal partition intended to separate designated lateral areas of a switchgear enclosure without a planned opening through the panel. The exact installation position and separation achieved depend on the complete cabinet design.
The PTBS1072 is an individual segregation accessory, not a complete verified separation system. The final form of internal separation depends on the complete switchgear assembly, including other partitions, barriers, structural components and applicable design verification.
ABB System pro E power segregation accessories support professional low-voltage switchgear construction through coordinated internal partitioning components, helping electrical panel builders develop organised equipment compartments, compatible structural arrangements and consistent electrical distribution cabinet layouts.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.