Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBS8052 System pro E Power blind vertical lateral and rear segregation accessory with intermediate upright arrangement for compatible 800 mm high and 500 mm deep low-voltage electrical distribution switchboards.
£44.11
The ABB PTBS8052, order code 1STQ008521A0000, is a dedicated blind vertical segregation accessory for ABB System pro E Power low-voltage electrical distribution switchboards. Designed for lateral and rear segregation with an intermediate upright arrangement, this accessory supports structured internal separation within compatible switchboard assemblies.
Part of the ABB System pro E Power range, the PTBS8052 is specified for switchboard configurations with a nominal height of 800 mm and depth of 500 mm. Its blind segregation design provides a solid physical partition arrangement for designated internal areas of a compatible electrical distribution enclosure.
The PTBS8052 combines a vertical lateral and rear segregation configuration with an intermediate upright arrangement. It is intended for professional switchboard construction where organised compartment layouts, suitable mechanical separation and compatibility with the surrounding enclosure structure are important.
Internal segregation is an important consideration in the design and construction of low-voltage electrical switchboards. Dedicated partition components can provide physical separation between designated areas of an assembly, supporting organised equipment layouts and helping panel builders implement the intended switchboard configuration.
The ABB PTBS8052 is specified for vertical lateral and rear segregation within compatible System pro E Power switchboards. Its intermediate upright arrangement supports integration with the corresponding enclosure structure, while its blind configuration provides a solid partition rather than an intentionally open segregation panel.
With a nominal 800 mm height and 500 mm depth configuration, the PTBS8052 is intended for corresponding modular switchboard sections. Dedicated segregation accessories help electrical panel builders select appropriate components for particular internal layouts and structural arrangements.
The PTBS8052 is a mechanical segregation accessory and does not independently provide electrical switching, overload protection, short-circuit protection or isolation. Any required form of internal separation must be determined from the complete switchboard design, compatible components and applicable ABB assembly and verification documentation.
The ABB PTBS8052 is a blind vertical segregation accessory designed for lateral and rear internal segregation in compatible ABB System pro E Power low-voltage switchboards. Its specified configuration includes an intermediate upright arrangement.
The PTBS8052 is specified for a nominal switchboard height of 800 mm and depth of 500 mm. Compatibility with the complete enclosure arrangement should be confirmed using ABB System pro E Power assembly documentation.
The blind configuration identifies a solid segregation partition arrangement rather than a panel intentionally designed with open ventilation or access apertures. It is intended to provide physical separation within the designated switchboard configuration.
Yes. The manufacturer's product designation specifies lateral and rear vertical segregation with an intermediate upright. The exact supplied components and fixing requirements should be checked against the relevant ABB installation documentation.
The PTBS8052 is an internal vertical segregation accessory, but a specific form of internal separation cannot be established from this accessory alone. The final classification depends on the complete switchboard design, associated components and applicable assembly verification requirements.
ABB System pro E Power segregation accessories provide purpose-designed solutions for professional low-voltage switchboard construction. The PTBS8052 supports blind lateral and rear vertical segregation with an intermediate upright arrangement in compatible 800 mm high and 500 mm deep switchboard configurations, helping electrical panel builders create organised and maintainable power distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.